Indian Institute of Technology Kharagpur |

Patent

Acetabular Cup Implant and a Method for Additive Manufacturing of the Same Based on Geodesical Dome Approach with Continuous Radially Graded Porosity. Mukherjee S., Dhara S. , Saha P. By - (2023)

Journal

Effect of Circular Hole Discontinuities on Crushing Characteristics of Combined Geometry Shells of Tailor Welded Blanks Ykatiyar B. S., Panda S. K., Saha P. By Journal of Materials Engineering and Performance - (2023)
The effect of different laser head angles and shielding gas supply systems to maximize the depth of penetration by minimizing the plasma shielding effect in fiber laser welding of 3-mm thick NiTinol sheet Datta S., Raza M. S., Muvvala G. , Saha P. , Pratihar D. K. By Optik 283 - (2023)
Multi-objective optimization in electrochemical micro-drilling of Ti6Al4V using nature-inspired techniques Acharya B. R., Sethi A. , Das A. K., Saha P. , Pratihar D. K. By Materials and Manufacturing Processes - (2022)
Electrochemical Dissolution of WC-Co Micro-Tool in Micro-WECM Using an Eco-Friendly Citric Acid Mixed NaNO3 Electrolyte Sethi A., Acharya B. R., Saha P. By Journal of The Electrochemical Society 169 - (2022)
Investigation of IR pyrometer-captured thermal signatures and their role on microstructural evolution and properties of Inconel 625 tracks in DED-based additive manufacturing Misra S., Mohanty I. , Raza M. S., Chakraborti R. , Chatterjee P. , Saha P. , Kumar C. S. By Surface and Coatings Technology 447 - (2022)
Laser beam welding of NiTinol sheets in butt joint arrangement and optimization of the process using desirability function analysis and metaheuristic techniques Datta S., Raza M. S., Das A. K., Saha P. , Pratihar D. K. By Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering - (2022)
Quasistatic deformation analysis of melt-based molded die-cast open-cell aluminum alloy foam Raza M. S., Datta S. , Saha P. By Archives of Civil and Mechanical Engineering 23 - (2022)
Experimental and numerical analyses on crushing behaviour of drawn cups of laser welded tailored blanks under axial loading Katiyar B. S., Panda S. K., Saha P. By Archives of Civil and Mechanical Engineering 22 - (2022)
Study of the electrochemical dissolution behavior of Nitinol shape memory alloy in different electrolytes for micro-ECM process Sethi A., Acharya B. R., Saha P. By The International Journal of Advanced Manufacturing Technology 7019-7035 (2022)
Study on laser beam butt-welding of NiTinol sheet and input-output modelling using neural networks trained by metaheuristic algorithms Datta S., Das A. K., Raza M. S., Saha P. , Pratihar D. K. By Materials Today Communications 32 - (2022)
Application of non-associated flow rule for prediction of nonuniform material flow during deep drawing of tailor welded blanks Bandyopadhyay K., Basak S. , Panda S. K., Saha P. , Zhou N. By Proc IMechE Part B: J Engineering Manufacture - (2022)
Microstructural evolution and nanoindentation study of magnetic pulse welded Nitinol and Aluminium sheets Mandal M., Patra S. , Chakraborty R. , Saha P. , Shome M. By Materials Characterization 184 - (2022)
A comparative study on the adhesive bonding strength of unidirectional, 4-Harness Satin weaved and plain weaved carbon fibre reinforced polymer after KrF excimer laser pre-treatment Kundu J., Mandal S. , Saha P. By Applied Surface Science 592 - (2022)
Enhanced corrosion, tribocorrosion resistance and controllable osteogenic potential of stem cells on micro-rippled Ti6Al4V surfaces produced by pulsed laser remelting Mukherjee S., Dhara S. , Saha P. By Journal of Manufacturing Processes 65 119-133 (2021)
Monitoring and analysis of melt-assisted deformation behavior of 304L stainless steel during multipass laser forming process using IR pyrometer and laser-based displacement sensor Raza M.S., Datta S., Gopinath M., Saha P. By Optics and Laser Technology 135 106718- (2021)
Experimental Investigation on Microstructure and Mechanical Properties of Laser-Welded Nb-1% Zr-0.1% C Alloy Gupta S. K., Jaypuria S. , Pratihar D. K., Saha P. By Journal of Materials Engineering and Performance 30 8412-8425 (2021)
Micro-mechanical and X-Ray micro-computed tomographical analysis of quasi-static three-point loading behaviour of closed-cell aluminium foam with and without epoxy-bonded aluminium face-sheet Raza M. S., Datta S. , Saha P. By Materials Science and Engineering: A 809 - (2021)
Quasi-static crushing behavior of stretch formed domes of laser welded tailored blanks Katiyar B. S., Panda S. K., Saha P. By Thin-Walled Structures 159 107288- (2021)
Thermal and morphological analysis of the interaction effect of different assist gases with gas-filled closed-cell aluminium foam during laser cutting process Raza M. S., Datta S. , Saha P. By Proc IMechE Part B: J Engineering Manufacture 1-12 (2020)
Parametric Optimization for Autogenous Butt Laser Welding of Sub-Millimeter Thick SS 316 Sheets using Central Composite Design Saha P., Waghmare D. By Optics and Laser Technology 122 - (2020)
Experimental investigations and parametric optimization of laser beam welding of NiTinol sheets by metaheuristic techniques and desirability function analysis Datta S., Raza M.S., Das A.K., Saha P., Pratihar D.K. By Optics and Laser Technology 124 - (2020)
Experimental investigations and parametric optimization of laser beam welding of NiTinol sheets by metaheuristic techniques and desirability function analysis Datta S., Das A. K., Pratihar D. K., Raza M. S., Saha P. By Optics and Laser Technology 124 - (2020)
Study on mechanical and metallurgical properties of fiber laser welded Nb-1% Zr-0.1% C alloy Gupta S.K., Jaypuria S., Pratihar D.K., Saha P. By Optics and Laser Technology 127 - (2020)
Study on mechanical and metallurgical properties of fiber laser welded Nb-1%Zr-0.1%C alloy Gupta S. K., Jaypuria S. , Pratihar D. K., Saha P. By Optics and Laser Technology 127 1061153- (2020)
Study on mechanical performance of laser-welded NiTinol sheet Datta S., Raza M. S., Saha P. , Pratihar D. K. By Proc IMechE Part B: J Engineering Manufacture - (2020)
Study on Mechanical performance of laser welded NiTinol sheet Datta S., Raza M. S., Saha P. , Pratihar D. K. By IMechE Part B, Journal of Engineering Manufacture - (2020)
Surface Modification of High-Carbon Steel Using Fiber Laser and Its Thermal, Microstructural and Tribological Analysis Raza M. S., Datta S. , Vivekanand K. , Saha P. By Journal of Materials Engineering and Performance 28 1873-1883 (2019)
A comparative outlook of corrosion behaviour and chlorophyll assisted growth kinetics of various carbon nano-structure reinforced hydroxyapatite-calcium orthophosphate coating synthesized in-situ through pulsed electrochemical deposition R. C., Manna J. S., Das D. , Sen M. , Saha P. By Applied Surface Science 475 28-42 (2019)
A comparative study of surface characterization and corrosion performance properties of laser surface modified biomedical grade nitinol Chakraborty R., Datta S. , Raza M. S., Saha P. By Applied Surface Science 469 753-763 (2019)
Fabrication of high aspect ratio cylindrical tungsten micro tool by reverse micro-ECM process Sethi A., Achariya B. R., Saha P. By Internation Journal of Precision Technology 8 - (2019)
Effects of Heat Input on Weld-Bead Geometry, Surface Chemical Composition, Corrosion Behavior and Thermal Properties of Fiber Laser-Welded Nitinol Shape Memory Alloy Datta S., Raza M. S., Saha P. , Pratihar D. K. By Journal of Materials Engineering and Performance 28 2754-2763 (2019)
Effects of Heat Input on Weld-Bead Geometry, Surface Chemical Composition, Corrosion Behavior and Thermal Properties of Fiber Laser-Welded Nitinol Shape Memory Alloy Saha P., Datta S., Raza M.S., Pratihar D.K. By Journal of Materials Engineering and Performance 28 2754-2763 (2019)
Effects of process parameters on the quality aspects of weld-bead in laser welding of NiTinol sheets Datta S., Raza M. S., Saha P. , Pratihar D. K. By Materials and Manufacturing Processes 34 648-659 (2019)
Synthesis and characterization of nickel free titanium hydroxyapatite composite coating over Nitinol surface through in-situ laser cladding and alloying Chakraborty R., Raza M. S., Datta S. , Saha P. By Surface and Coatings Technology 358 539-550 (2019)
Electrical Power Generation from Wet Textile Mediated by Spontaneous Nano-Scale Evaporation Das S. S., Pedireddi V. M., Bandopadhyay A. , Saha P. , Chakraborty S. By Nano Letters 7191-7200 (2019)
Electrical Power Generation from Wet Textile Mediated by Spontaneous Nano-Scale Evaporation Das S. S., Pedireddi V. M., Bandopadhyay A. , Saha P. , Chakraborty S. By Nano letters - (2019)
Synthesis, characterization and cytocompatibility assessment of hydroxyapatite-polypyrrole composite coating synthesized through pulsed reverse electrochemical deposition Chakraborty R., Seesala V. S., Manna J. S., Saha P. , Dhara S. By Materials Science and Engineering: C 94 597-607 (2019)
Fibre laser cutting of thick closed cell aluminium foam: morphological analysis and its parametric optimisation Raza M. S., Datta S. , Singh J. , Saha P. By International Journal of Precision Technology 8 - (2019)
Electrochemical stability and bio-mineralization capability of zinc substituted and elemental zinc reinforced calcium phosphate composite coatings synthesized through pulsed electro-deposition Chakraborti R., Mandal M. , Saha P. By Ceramics International 45 22899-22911 (2019)
Electrochemical stability and bio-mineralization capability of zinc substituted and elemental zinc reinforced calcium phosphate composite coatings synthesized through pulsed electro-deposition Chakraborty R., Mandal M. , Saha P. By Ceramics International 45 22899-22911 (2019)
Development and relative comparison of polypyrrole-calcium phosphate composite coatings with differential concentration of chlorophyll functionalized polymer particle achieved through pulsed electro deposition Chakraborty R., Manna J. S., Saha P. By Surface and Coatings Technology 363 221-235 (2019)
Electrokinetic Trapping of Microparticles Using Paper-and-Pencil Microfluidics Das S. S., Kar S. , Dawn S. , Saha P. , Chakraborty S. By PHYSICAL REVIEW APPLIED 12 - (2019)
Parametric study of laser cutting of carbon fibre reinforced polymer (CFRP) and the effect of fibre orientation on cutting quality Raza M. S., Datta S. , Bule B. , Saha P. By Advances in Materials and Processing Technologies 5 - (2019)
Reverse Engineering Approach for Customized Dental and Maxillofacial Implants of Alumina Fibre Reinforced Composite Mohanty S., Srivas P. K., Rameshbabu A. P., Saha P. , Dhara S. By Materials Today: Proceedings 11 753-760 (2019)
Excimer laser cleaning of black sulphur encrustation from silver surface Raza M. S., Das S. S., Tudu P. , Saha P. By Optics and Laser Technology 113 95-103 (2019)
Comparison of Osteoconduction, cytocompatibility and corrosion protection performance of hydroxyapatite-calcium hydrogen phosphate composite coating synthesized in-situ through pulsed electro-deposition with varying amount of phase and crystallinity Chakraborty R., Seesala V. S., Sengupta S. , Dhara S. , Saha P. , Das K. , Das S. By Surfaces and Interfaces 10 1-10 (2018)
Comparison of Osteoconduction, cytocompatibility and corrosion protection performance of hydroxyapatite-calcium hydrogen phosphate composite coating synthesized in-situ through pulsed electro-deposition with varying amount of phase and crystallinity Chakraborty R., Seesala V.S., Sengupta S., Dhara S., Saha P., Das K., Das S. By Surfaces and Interfaces 10 1-10 (2018)
Problems on the development of hard and low friction in-situ coatings on Ti-6Al-4V using laser cladding Haldar B., Saha P. By Procedia Manufacturing 20 446-451 (2018)
Hydroelectric power plant on a paper strip Das S. S., Kar S. , Anwar T. , Saha P. , Chakraborty S. By Lab on a Chip 18 1560-1568 (2018)
Exploring the possibility of dissimilar welding of NiTi to Ti using Yb-fiber laser Datta S., Raza M. S., Kumar S. , Saha P. By Advances in Materials and Processing Technologies 4 614-625 (2018)
Identifying defects and problems in laser cladding and suggestions of some remedies for the same Haldar B., Saha P. By Materials Today: Proceedings 5 13090-13101 (2018)
Abrasive Jet System And Its Various Applications In Abrasive Jet Machining, Erosion Testing, Shot-Peening, And Fast Cleaning Haldar B., Ghara T. , Ansari R. , Das S. , Saha P. By Materials Today: Proceedings 5 13061-13068 (2018)
A comparative study on surface morphology and electrochemical behaviour of hydroxyapatite-calcium hydrogen phosphate composite coating synthesized in-situ through electro chemical process under various deposition conditions Chakraborti R., Saha P. By Surfaces and Interfaces 12 160-167 (2018)
Multicomponent laser coating developed on Ti-6Al-4V using hBN, Ni-coated-graphite, Ni and Ti powders for improving tribological performance Haldar B., Srivastva V. K., Keshvendra K. , Saha P. By Materials Today: Proceedings 5 13495-13503 (2018)
Laser surface remelting of Ti and its alloys for improving surface biocompatibility of orthopaedic implants Mukherjee S., Dhara S. , Saha P. By Materials Technology 33 106-118 (2017)
Synthesis and characterization of MWCNT reinforced nano-crystalline copper coating from a highly basic bath through pulse electrodeposition Chakraborty R., Sengupta S. , Das S. , Saha P. , Das K. By Surfaces and Interfaces 9 28-35 (2017)
MWCNT reinforced bone like calcium phosphate Hydroxyapatite composite coating developed through pulsed electrodeposition with varying amount of apatite phase and crystallinity to promote superior osteoconduction, cytocompatibility and corrosion protection performance compared to bare metallic implant surface Chakrabirty R., Seesala V. S., Sen M. , Sengupta S. , Dhara S. , Saha P. , Das K. , Das S. By Surface and Coatings Technology 325 496-514 (2017)
Formability assessment and failure prediction of laser welded dual phase steel blanks using anisotropic plastic properties Bandyopadhyay K., Lee M. , Panda S. K., Saha P. , Lee J. By International Journal of Mechanical Sciences 126 203-221 (2017)
Synthesis of calcium hydrogen phosphate and hydroxyapatite coating on SS316 substrate through pulsed electrodeposition Chakraborty R., Sengupta S. , Saha P. , Das K. , Das S. By Materials Science and Engineering: C 69 875-883 (2016)
Optimization of Fiber Laser Welding of DP980 Steels Using RSM to Improve Weld Properties for Formability Bandyopadhyay K., Panda S. K., Saha P. By Journal of Materials Engineering and Performance 25 2462-2477 (2016)
Microstructures and failure analyses of DP980 laser welded blanks in formability context Bandyopadhyay K., Panda S. K., Saha P. , Hernandez V. B., Zhou Y. N. By Materials Science and Engineering: A 652 250-263 (2016)
An experimental investigation of surface modification of C-40 steel using W Cu powder metallurgy sintered compact tools in EDM Patowari P. K., Mishra P. , Saha P. K. By The International Journal of Advanced Manufacturing Technology 80 343-360 (2015)
Limiting drawing ratio and deep drawing behavior of dual phase steel tailor welded blanks: FE simulation and experimental validation Bandyopadhyay K., Panda S. K., Saha P. , Padmanabham G. By Journal of Materials Processing Technology 217 48-64 (2015)
Use of stress based forming limit diagram to predict formability in two-stage forming of tailor welded blanks Bandyopadhyay K., Basak S. , Panda S. K., Saha P. By Materials & Design 67 558-570 (2015)
Enhancing the biocompatibility of Ti6Al4V implants by laser surface microtexturing: an in vitro study Mukherjee S., Dhara S. , Saha P. By The International Journal of Advanced Manufacturing Technology 76 5-15 (2015)
Experimental investigation on micro-electrochemical sinking operation for fabrication of micro-holes Das A. K., Saha P. By Journal of the Brazilian Society of Mechanical Sciences and Engineering 57 657-663 (2014)
Fabrication of cylindrical micro tools by micro electrochemical form turning operation Das A. K., Saha P. By Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228 74-81 (2014)
Development and characterization of hard and wear resistant MMC coating on Ti-6Al-4V substrate by laser cladding Dhanda M., Haldar B. , Saha P. By Procedia Materials Science 6 1226-1232 (2014)
Development of an in-situ multi-component reinforced Al-based metal matrix composite by direct metal laser sintering technique Optimization of process parameters Ghosh S. K., Bandyopadhyay K. , Saha P. By Materials Characterization 93 68-78 (2014)
Influence Of Surface Roughness Parameters On Mg63 Cell Viability: A Study On Laser Microtextured Ti6Al4V Surfaces Mukherjee S., Dhara S. , Saha P. By The International Journal of Artificial Organs 37 590- (2014)
In-situ multi-component MMC coating developed on Ti-6Al-4V substrate Haldar B., Karmakar S. , Saha P. , Chattopadhyay A. B. By Surface Engineering 30 256-262 (2014)
Investigations into the influence of weld zone on formability of fiber laser welded advanced high strength steel Bandyopadhyay K., Panda S. K., Saha P. By Journal of Materials Engineering and Performance 23 1465-1479 (2014)
Multi-objective optimization in wire-electro-discharge machining of TiC reinforced composite through Neuro-Genetic technique Saha P., Tarafdar D. , Pal S. K., Saha P. , Srivastava A. K., Das K. By Applied Soft Computing 13 2065-2074 (2013)
Modeling of wire-electro-discharge machining of TiC/Fe in-situ metal matrix composite using normalized RBFN with enhanced k-means clustering technique Saha P., Tarafdar D. , Pal S. K., Saha P. , Srivastava A. K., Das K. By Int. J. of Manufacturing Sci. and Technol. 43 107-116 (2009)
Modeling of wire-electro-discharge machining of TiC/Fe in-situ metal matrix composite using normalized RBFN with enhanced k-means clustering technique Saha P., Tarafdar D. , Pal S. K., Saha P. , Srivastava A. K., Das K. By The International Journal of Advanced Manufacturing Technology 43 107-116 (2009)
Soft computing models based prediction of cutting speed and surface roughness in wire electro-discharge machining of tungsten carbide cobalt composite Saha P., Singha A. , Pal S. K., Saha P. By International Journal of Advanced Manufacturing Technology 39 74-84 (2008)
Modeling of electrical discharge machining process using backpropagation neural network and multi-objective optimization using non-dominating sorting genetic algorithm-II Mandal D., Pal S. K., Saha P. By Journal of Materials Processing Technology 186 154-162 (2008)
Backpropagation neural network based modeling of multi-responses of an electrical discharge machining process Mandal D., Pal S. K., Saha P. By International Journal of Knowledge-Based and Intelligent Engineering Systems 11 105-113 (2007)
An Experimental Design approach to Selective Laser Sintering of Low Carbon Steel Chatterjee A. N., Chatterjee A. N., Kumar S. , Saha P. , Mishra P. K., Choudhury A. R. By Journal of Materials processing technology 136 151-157 (2003)

Conferences

Effect of addition of -phase stabilizing elements on the microstructure and mechanical properties of Ti64 via laser-based processing route Mohanty I., Mishra G. , Saha P. , Kar S. K. By IIM ATM 2022 - (2022)
KrF Excimer Laser Surface Treatment of Unidirectional and 4-Harness Satin Weaved Carbon Fibre Reinforced Polymer for Aerospace and Automotive Applications Kundu J., Mandal S. , Saha P. By Advances in Modern Machining Processes: Proceedings of AIMTDR 2021 421-433 (2022)
KrF Excimer Laser Surface Treatment of Unidirectional and 4 Harness Satin Weaved Carbon Fibre Reinforced Polymer for Aerospace and Automotive Applications Kundu J., Mandal S. , Saha P. By 8th International and 29th All India Manufacturing Technology, Design and Reseach Conference - (2021)
A Critical Study of Bead-on-Plate Laser Welding of Niobium Alloy PWC-11 Gupta S.K., Datta S., Jaypuria S., Pratihar D.K., Saha P. By Lecture Notes in Mechanical Engineering 397-404 (2020)
A critical study on bead-on-plate laser welding of Niobium alloy PWC-11 Gupta S. K., Datta S. , Jaypuria S. , Pratihar D. K., Saha P. By ICAMME Conf. 2019 - (2019)
A study on micro-tool and micro-feature fabrication in micro-EDM Acharya B. R., Sethi A. , Dindigala A. , Saha P. , Pratihar D. K. By AIMTDR 2018 - (2018)
Capillary Driven Electrokinetic Power Generator Das S. S., Bandopadhyay A. , Saha P. , Chakraborty S. By 71st Annual Meeting of the APS Division of Fluid Dynamics - (2018)
Numerical simulations and experimental verification of laser welding of Nylon 6 Gupta S. K., Jaypuria S. , Pratihar D. K., Saha P. By COMSOL Conf. 2018 - (2018)
Improvement of ionic bonding strength and electrochemical corrosion resistance of hydroxyapatite- calcium phosphate pulsed electro chemically deposited in-situ coating through hydroxyl ion treatment Chakraborty R., Datta S., Raza M.S., Saha P. By ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 1 - (2018)
Improvement of Ionic Bonding Strength and Electrochemical Corrosion Resistance of Hydroxyapatite-Calcium Phosphate Pulsed Electrochemically Deposited In-Situ Coating Through Hydroxyl Ion Treatment Chakraborti R., Datta S. , Raza M. S., Saha P. By ASME 2018 13th International Manufacturing Science and Engineering Conference V001T05A0- (2018)
Effects of line energy on mechanical properties, corrosion and shape memory behavior of laser-welded NiTinol joints Datta S., Raza M.S., Saha P., Pratihar D.K. By ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 4 - (2018)
Effects of Line Energy on Mechanical Properties, Corrosion and Shape Memory Behavior of Laser-Welded NiTinol Joints Datta S., Raza M. S., Saha P. , Pratihar D. K. By ASME 2018 13th International Manufacturing Science and Engineering Conference V004T03A0- (2018)
Investigating the effect of process parameters and scan strategy during laser forming of thin open celled aluminium foam Raza M.S., Srinu T., Datta S., Saha P. By ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 4 - (2018)
Investigating the Effect of Process Parameters and Scan Strategy During Laser Forming of Thin Open Celled Aluminium Foam Raza M. S., Srinu T. , Datta S. , Saha P. By ASME 2018 13th International Manufacturing Science and Engineering Conference V004T03A0- (2018)
A comparative study of micro-tool fabrication methods using micro-EDM Acharya B. R., Sethi A. , Saha P. , Pratihar D. K. By 10-th International Conference on Precision, Meso, Micro and Nano Engineering - (2017)
A comparative study of micro-tool fabrication methods using micro-EDM Acharya B. R., Sethi A. , Saha P. , Pratihar D. K. By 10th International Conference on Precision, Meso, Micro and Nano Engineering 17-20 (2017)
Effect of welding speed on weld bead quality aspects in bead-on-plate laser welding of NiTinol by Yb-fiber laser Datta S., Raza M. S., Saha P. , Pratihar D. K. By 10-th International Conference on Precision, Meso, Micro and Nano Engineering - (2017)
Parametric optimization in WEDM of WC-Co composite by neuro-genetic technique Saha P., Pal S. K., Saha P. By Proc. of the International Conference on Mechanical Engineering - (2011)
Modeling and Multi-Objective Optimization in Wire Electro-Discharge Machining of in-situ TiC reinforced austenitic manganese steel matrix composite Saha P., Pal S. K., Saha P. By National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM 2010) - (2010)
A neural network approach for modeling the wire electro discharge machining of tungsten carbide cobalt composite Saha P., Singh A. , Pal S. K., Saha P. By Proceedings of the Global Conference on Production and Industrial Engineering, CPIE-2007 - (2007)
Application of fully supervised radial basis function network for prediction of machining performance in wire-EDM Saha P., Pal S. K., Saha P. By International Conference of Precision, Meso, Micro and Nano Engineering (COPEN) - (2007)
Modelling of electric discharge machining using artificial neural network Mandal D., Pal S. K., Saha P. By Proceedings of the National Conference on Soft Computing Techniques for Engineering Applications 153-158 (2006)
A survey of soft computing methods used in Wire-EDM Saha P., Pal S. K., Saha P. By Proceedings of the 12th National Conference on Machines and Mechanisms 243-248 (2005)

Book Chapter/Section

Comparison of Single-and Multiple-Spot Resistance Welding of Sub-millimeter Thick SS304 and SS316 Sheets Waghmare D. B., Saha P. By Advances in Additive Manufacturing and Joining: Proceedings of AIMTDR 2018 461-473 (2020)
TiC, W2C Reinforced Ti-W MMC Coating Developed on Ti-6Al-4V Substrate Through Laser Cladding Gattani P., Haldar B. , Azeem A. , Saha P. By CAD/CAM, Robotics and Factories of the Future 253-262 (2016)
Prediction of formability of bi-axial pre-strained dual phase steel sheets using stress-based forming limit diagram Basak S., Bandyopadhyay K. , Panda S. K., Saha P. By Advances in Material Forming and Joining 167-192 (2015)
Selective laser sintering: a case study of tungsten carbide and cobalt powder sintering by pulsed Nd: YAG laser Ghosh S. K., Das A. K., Saha P. By Lasers Based Manufacturing 441-459 (2015)

Mechanical Engineering

Faculty

Research Areas

Principal Investigator

Co-Principal Investigator

Ph. D. Students

Abhijeet Sethi

Bhupesh Singh Katiyar

Biswesh Ranjan Acharya

Danish Ashraf

Indranil Mandal

Ipsita Mohanty

Joydeep Kundu

Malay Masanta

Parimal Tudu

Prasenjit Patra

Rakhohari Bauri

Saikat Nandi

Santosh Kumar Gupta

Saurav Misra

Talari Srinu