Indian Institute of Technology Kharagpur |

Book Chapter/Section

A Hybrid AI-based Conceptual Decision-Making Model for Sustainable Maintenance Strategy Selection Boral S., Chaturvedi S. K., Achutha Naikan V. N., Howard I. By Advanced Multi-Criteria Decision Making for Addressing Complex Sustainability Issues - (Accepted/In-Press)

Journal

Alternative scales in reliability models for a repairable system Syamsundar A., Naikan V. , Wu S. By Reliability Engineering and System Safety - (Accepted/In-Press)
A model for financial viability of implementation of condition based maintenance for induction motors Gagalia A., Naikan V. A. By Journal of Quality in Maintenance Engineering - (Accepted/In-Press)
An Integrated Approach for Fuzzy Failure Modes and Effects Analysis using Fuzzy AHP and Fuzzy MAIRCA Boral S., Chaturvedi S. K., Mckee K. , Achutha V. N. By Engineering Failure Analysis - (Accepted/In-Press)
Performance measurement of road freight transportation: A case of trucking industry Achutha Naikan V. N., Dadsena K. K., Sarmah S. P., K. M. By Transport Policy 137 125-140 (2023)
A Methodology for Selection of Condition Monitoring Techniques for Rotating Machinery Achutha Naikan V. N., Goel A. K., Singh G. By International Journal of Prognostics and Health Management, 13 1-20 (2022)
Estimating maintenance effectiveness of a repairable system under time-based preventive maintenance Naikan V. A., Syamsundar A. , Wu S. By Computers & Industrial Engineering 156 - (2021)
Estimating maintenance effectiveness of a repairable system under time-based preventive maintenance Syamsundar A., Naikan V.N.A., Wu S. By Computers and Industrial Engineering 156 - (2021)
Extended Arithmetic Reduction of Age Models for the Failure Process of a Repairable System Syamsundar A., Naikan V.N.A., Wu S. By Reliability Engineering and System Safety 215 - (2021)
An integrated interval type-2 fuzzy sets and multiplicative half quadratic programming-based MCDM framework for calculating aggregated risk ranking results of failure modes in FMECA Chaturvedi S. K., Achutha V. N., Howard I. , Mckee K. , Boral S. By Process Safety and Environmental Protection 150 194-222 (2021)
An integrated interval type-2 fuzzy sets and multiplicative half quadratic programming-based MCDM framework for calculating aggregated risk ranking results of failure modes in FMECA Boral S., Chaturvedi S.K., Howard I., Naikan V.N.A., McKee K. By Process Safety and Environmental Protection 150 194-222 (2021)
Alternative scales in reliability models for a repairable system Syamsundar A., Naikan V.N.A., Wu S. By Reliability Engineering and System Safety 193 - (2020)
An integrated approach for fuzzy failure modes and effects analysis using fuzzy AHP and fuzzy MAIRCA Boral S., Howard I. , Chaturvedi S. K., Mckee K. , Naikan V. A. By Engineering Failure Analysis 108 - (2020)
An Integrated Approach for Fuzzy Failure Modes and Effects Analysis using Fuzzy AHP and Fuzzy MAIRCA Chaturvedi S. K., Boral S. , Howard I. , Mckee K. , Achutha V. N. By Engineering Failure Analysis 108 - (2020)
A novel hybrid multi-criteria group decision making approach for failure mode and effect analysis: An essential requirement for sustainable manufacturing Boral S., Howard I. , Chaturvedi S. K., Mckee K. , Achutha V. N. By Sustainable Production and Consumption 21 14-32 (2020)
Risk Evaluation and mitigation of sustainable road freight transport operation: A case of trucking industry Dadsena K., Sarmah S. P., Achutha V. N. By Int Journal of Production Research 57 6223-6245 (2019)
Risk Evaluation and mitigation of sustainable road freight transport operation: A case of trucking industry Dadsena K. K., Sarmah S. P., Achutha Naikan V. N. By International Journal of Production Research 57 6223-6245 (2019)
A Case-Based Reasoning system for fault detection and isolation: a case study on complex gearboxes Boral S., Chaturvedi S. K., Achutha V. N. By Journal of Quality in Maintenance Engineering 25 1-23 (2019)
A novel framework for time dependent availability analysis of degraded systems Meesala S.R., Naikan V.N.A. By International Journal of Recent Technology and Engineering 8 23-26 (2019)
Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption Singh G., Kumar T. A., Naikan V. A. By Reliability Engineering & System Safety 184 193-201 (2019)
Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption Singh G., Anil Kumar T.C., Naikan V.N.A. By Reliability Engineering and System Safety 184 193-201 (2019)
A hybrid decision making framework for modified failure mode effects and criticality analysis: A case study on process plant induction motors Gugaliya A., Boral S., Naikan V.N.A. By International Journal of Quality and Reliability Management 36 1266-1283 (2019)
A Hybrid Decision Making Framework for Modified Failure Mode Effects and Criticality Analysis: A Case Study on Process Plant Induction Motors Gagalia A., Boral S. , Achutha Naikan V. N. By International Journal of Quality & Reliability Management - (2019)
Optimal budget allocation for risk mitigation strategy in trucking industry: An integrated approach Dadsena K. K., Sarmah S. P., Achutha Naikan V. N., Jena S. K. By Transportation Research Part A: Policy and Practice 121 37-55 (2019)
Optimal budget allocation for risk mitigation strategy in trucking industry: An integrated approach Dadsena K.K., Sarmah S.P., Naikan V.N.A., Jena S.K. By Transportation Research Part A: Policy and Practice 121 37-55 (2019)
A model for financial viability of implementation of condition based maintenance for induction motors Gugaliya A., Naikan V.N.A. By Journal of Quality in Maintenance Engineering 26 213-230 (2019)
Risk evaluation and mitigation of sustainable road freight transport operation: a case of trucking industry Kumar Dadsena K., Sarmah S.P., Naikan V.N.A. By International Journal of Production Research 57 6223-6245 (2019)
Speed estimation of rotating machinery using generated harmonics Singh G., Kumar T.C.A., Naikan V.N.A. By Computers and Electrical Engineering 72 420-430 (2018)
Speed Estimation of Rotating Machinery Using Generated Harmonics Singh G., Achutha Naikan V. N. By Computers & Electrical Engineering journal 72 420-430 (2018)
Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption Singh G., Kumar T. A., Achutha Naikan V. N. By Reliability Engineering and System Safety 184 193-201 (2018)
Detection of half broken rotor bar fault in VFD driven induction motor drive using motor square current MUSIC analysis Singh G., Naikan V.N.A. By Mechanical Systems and Signal Processing 110 333-348 (2018)
Detection of Half Broken Rotor Bar Fault in VFD Driven Induction Motor Drive Using Motor Square Current MUSIC Analysis Singh G., Achutha Naikan V. N. By Mechanical Systems and Signal Processing 110 333-348 (2018)
Development of virtual lab equipmwnt on cavitation of centrifugal pump Achutha Naikan V. N., Behera D. P. By International Journal of Scientific & Engineering Research 9 51-54 (2018)
Orbital TIG Welding and Evaluating Methods of Propulsion Feed Lines for Satellites Karthikeyan M., Achutha Naikan V. N., Narayan R. By International Journal of COMADEM 20 - (2017)
Root cause analysis and reliability improvement methods for orbital TIG welding process for propulsion feed system of satellites Karthikeyan M., Achutha Naikan V. N., Narayanan R. By International Journal of System Assurance Engineering and Management 8 1-15 (2017)
Broken Rotor Bar Fault Diagnosis in VFD Driven Induction Motors by an Improved Vibration Monitoring Technique Kumar T. A., Singh G. , Achutha Naikan V. N. By International Journal of Performability Engineering 13 87-94 (2017)
Infrared thermography based diagnosis of inter-turn fault and cooling system failure in three phase induction motor Singh G., Achutha Naikan V. N. By Infrared Physics & Technology 87 134-138 (2017)
Induction motor inter turn fault detection using infrared thermographic analysis Achutha Naikan V. N., Singh G. , Anil Kumar T. C. By Infrared Physics & Technology, Infrared Physics & Technology 77 277-282 (2016)
Vibration Response Based Reliability Modeling for Rotor Systems with Imbalance Achutha Naikan V. N., V. H. By International Journal of Performability Engineering 12 283-296 (2016)
A Markov system dynamics approach for repairable systems reliability modeling Rao M., Achutha Naikan V. N. By International Journal of Reliability, Quality and Safety Engineering, World Scientific Publishing Company Vol. 23 , No.1 pp1650004-1to15 (2016)
A Methodology for Risk Assessment and Formulation of Mitigation Strategies for Trucking Industry Achutha Naikan V. N., Dadsena K. K., Sarmah S. P. By International Journal of Performability Engineering 12 573-588 (2016)
Orbital TIG Welding Process Parameter Optimization using Design of Experiment for Satellite Application Karthikeyan M., Achutha Naikan V. N., Narayan R. , Sudhakar D. By International Journal of Performability Engineering Vol.12, No.2 - (2016)
Orbital TIG Welding Process Parameter Optimization using Design of Experiment for Satellite Application Achutha Naikan V. N., M. K. By International Journal of Performability Engineering 12 155-172 (2016)
Orbital TIG Welding Process Parameter s Effect on Porosity in Design of Experiment for Satellite Application Achutha Naikan V. N., M. K. By Life Cycle Reliability and Safety Engineering 5 1-7 (2016)
A System Dynamics Model for Transient Availability Modelling of Repairable Redundant Systems Rao M., Achutha Naikan V. N., Mahanty B. By International Journal of Performability Engineering Vol.11, No.3 pp203-211 (2015)
Availability Modeling of Repairable systems using Markov system dynamics simulation Rao M., Achutha Naikan V. N. By International Journal of Quality and Reliability Management, Emerald Group Publishing Limited Vol.32, No.5 pp517-531 (2015)
Effectiveness of vibration monitoring in the health assessment of induction motor Anil Kumar T., Singh G. , Achutha Naikan V. N. By (Special Issue Uncertainty in PHM), International Journal of Prognostics and Health Management Vol.6 1-9 (2015)
Multiple Fault Classification Using Support Vector Machine in a Machinery Fault Simulator Sahab F., Mohanty A. R., Achutha Naikan V. N. By Vibration Engineering and Technology of Machinery, Springer International Publishing Volume 23 pp1021-1031 (2015)
Accelerated Temperature and Voltage Life Tests on Aluminium Electrolytic Capacitors: A DOE Approach Achutha Naikan V. N., Rathore A. By International Journal of Quality and Reliability Management, Emerald Publishers Vol 33, No. 1 pp120-139 (2015)
Reliability Estimation by Accelerated Life Testing Achutha Naikan V. N. By Life Cycle Reliability and Safety Engineering Vol.4 pp 32-42 (2015)
A misalignment detection methodology by measuring rate of temperature rise of shaft coupling using thermal imaging Sahab F., Mohanty A. R., Achutha Naikan V. N. By Journal of Risk and Reliability, SAGE Journals Vol.229, No.3 pp. 209-219 (2015)
Reliability analysis of general standby systems using a novel hybrid simulation approach Rao M., Achutha Naikan V. N. By International Journal of Advanced Science and Engineering Technology, Springer Berlin Heidelberg Vol.4, No.1 - (2014)
Reliability Analysis of Repairable systems using System Dynamics Modeling and simulation Rao M., Achutha Naikan V. N. By Journal of Industrial Engineering International, Springer Vol 10, No.3 pp 1-10 (2014)
Condition monitoring of combined fault scenarios in rotating machinery by integrating vibration based analysis and design of experiments Majumdar J., Achutha Naikan V. N. By COMADEM International journal of condition monitoring and diagnostic engineering management Vol.17, No.2 pp 29-37 (2014)
A Demand-Supply Interference Technique for Modeling Spare-parts Inventory Policy Datar A., Sarmah S. P., Achutha Naikan V. N. By International Journal of Management Science and Engineering Management, Taylor & Francis Vol. 10, No. 3 pp 191-198 (2014)
Multiple fault classification using support vector machine in a machinery fault simulator S., Mohanty A. R., Achutha Naikan V. N. By 10th International Conference on Vibration Engineering and Technology of Machinery, Manchester, UK pp. 1021-1026 (2014)
Transducer invariant multi-class fault classification in a rotor-bearing system using support vector machines Sahab F., Mohanty A. R., Guduri B. , Achutha Naikan V. N. By International Journal of Measurement Vol.58 pp363-374 (2014)
Techniques for optimal placement of transducers for fault detection in rotating machines Sahab F., Mohanty A. R., Dastidar S. G., Achutha Naikan V. N. By Proceedings of the Institution of Mechanical Engineers, part O, Journal of Risk and Reliability Vol. 227, No. 2 pp119-131 (2013)
Book Review on Life Cycle Reliability Engineering Achutha Naikan V. N. By Microelectronics Reliability Vol. 53, No. 12 2079-2079 (2013)
Reliability Analysis of Temperature Sensor System Panchangam S. P., Achutha Naikan V. N. By International Journal of Reliability Quality and Safety Engineering Vol 20, No. 1 pp 1350003-1 to 20 (2013)
Reliability Modeling of Rotary Systems Subjected to Imbalance Hussain V., Achutha Naikan V. N. By International Journal of Performability Engineering Vol. 9, No. 4 pp 423-432 (2013)
Reliability Modeling of Sensors Network System for Critical Applications Swajeet Pilot Panchangam and V.N.A. Naikan By International Journal of Conceptions on Electronics and Communication Engineering Vol. 1,No. 1 pp 1-5 (2013)
Reliability and Imbalance Modelling of a Low Pressure Turbine Rotor Hussain V., Achutha Naikan V. N. By Life Cycle Reliability and Safety Engineering Vol.1, No. 2 pp 61-70 (2012)
Research Trends in Quality Engineering and Management Majumdar J., Vijaykumar B. , Achutha Naikan V. N. By International Journal of Performability Engineering , Special Issue on New Trends on Quality Engineering & Management Vol. 8, No. 6 pp 587-600 (2012)
Application of Reliability Growth Models to Sensor System Panchangam S. P., Achutha Naikan V. N. By Reliability Theory & Applications Vol. 7, No. 4 pp 19-30 (2012)
Failure Analysis Methods for Reliability Improvement of Electronic Sensors Swajeet Pilot Panchangam and V.N.A. Naikan By International Journal of Recent Technology and Engineering Vol.1, No. 3 pp 83-87 (2012)
Guest Editorial on New Trends in Quality Engineering and Management Achutha Naikan V. N. By International Journal of Performability Engineering, Special Issue on New Trends on Quality Engineering & Management Vol. 8, No. 6 pp 585-586 (2012)
Optimal Sensor Networks System reliability Allocation using Improved AGREE Method Swajeet Pilot Panchangam and V.N.A. Naikan By Reliability Theory & Applications Vol. 7, No 4 pp 80-89 (2012)
System Dynamics Approach for Modeling Cost of Quality B. Mahanty, T. Nath and V.N.A. Naikan By International Journal of Performability Engineering, Special Issue on New Trends on Quality Engineering & Management Vol. 8, No. 6 pp 625-634 (2012)
General Repair Models for Maintained Systems A. Syamsundar, K. Muralidharan, and V.N.A. Naikan By Sri Lankan Journal of Applied Statistics vol. 12 pp117-143 (2011)
Imperfect Repair Proportional Intensity Models for Maintained Systems Syamsundar A., Achutha Naikan V. N. By IEEE Transactions on Reliability Vol 60, No.4 pp 782-787 (2011)
Sequential Detection of Change Points for Maintained Systems Using Segmented Models Syamsundar A., Achutha Naikan V. N. By Quality and Reliability Engineering International Vol. 25, No. 6 pp 739-757 (2009)
A Novel Markov System Dynamic Framework for Reliability Analysis of Systems Rao M., Achutha Naikan V. N. By International Journal of Economic Quality Control Vol. 24, No 1 pp1-116 (2009)
A Managerial tool for Reliability analysis using a novel Markov System Dynamics (MSD) approach Rao M., Achutha Naikan V. N. By International Journal of Management Science and Engineering Management Vol.4, No.3 pp 230-240 (2009)
A Markov System Dynamics (MSD) based Reliability and Availability analysis of a process industry Rao M., Achutha Naikan V. N. By International Journal of Communications in Dependability and Quality Vol 12, No.3 pp 26-49 (2009)
An Algorithm for Simultaneous Optimization of Parameters of condition based preventive maintenance P.N.S. Rao and V.N.A. Naikan By Structural Health Monitoring Vol. 8, No.1 pp 83-94 (2009)
Hierarchical Segmented Point Process Models with multiple change points for Maintained Systems Syamsundar A., Achutha Naikan V. N. By International Journal of Reliability Quality and Safety Engineering Vol 15, No 3 pp 261-304 (2008)
A Markov System Dynamics (MSD) Approach for Reliability Analysis M.S. Rao and V.N.A. Naikan By International Journal of Communications in Dependability and Quality Vol 11, No.3 pp17-30 (2008)
An Optimal Maintenance Policy for Compressor of a Gas Turbine Power Plant Rao P. N., Achutha Naikan V. N. By ASME Journal for Engineering for Gas Turbines and Power Vol. 130, No.2 pp 0218011-0218015 (2008)
A proportional intensity segmented model for maintained systems Syamsundar A., Achutha Naikan V. N. By Proceedings of the Institute of Mechanical Engineers Part O - Journal of Risk and Reliability Vol. 222, No. 4 pp 643-654 (2008)
Mathematical Modeling of Maintained Systems using Point Processes Syamsundar A., Achutha Naikan V. N. By The IMA Journal of Management Mathematics pp 1-27 (2008)
Modelling of maintained systems using segmented point processes A. Syamsundar and V.N.A. Naikan By Advances in Performance and Safety of Complex Systems Macmillan Advanced Research Series pp 412-419 (2008)
Dynamic collaboration of repair crews in production shops P.N.S. Rao and V.N.A. Naikan By Journal of Scientific and Industrial Research Vol 66, No.4 pp317-324 (2007)
Segmented point process models for maintained systems Syamsundar A., Achutha Naikan V. N. By International Journal of Reliability, Quality and Safety Engineering Vol.14, No.5 431-458 (2007)
Analysis of crane wheel assembly failures using multivariate counting and point processes Syamsundar A., Achutha Naikan V. N. By Journal of Structural Engineering Vol.34,, No.4 pp 316-322 (2007)
Generalized condition-based preventive maintenance policy for Markov deteriorating systems Rao P. S., Achutha Naikan V. N. By International Journal on Performability Engineering Vol 2, No.2 pp175-189 (2006)
Reliability Modeling and Analysis of Automobile Engine Oil Kapur S., Achutha Naikan V. N. By Journal of IMechE Automobile Engineering Vol 220, No.2 pp 187-194 (2006)
An Optimization methodology for condition based minimal and major preventive maintenance Rao P. N., Achutha Naikan V. N. By International Journal of Economic Quality Control Vol 21, No.2 pp127-141 (2006)
Dynamic Modeling for Process Improvement T. Nath, B. Mahanty and V.N.A. Naikan By IT Based Manufacturing Narosa Publishers, New Delhi pp 691-696 (2003)
Dynamics of Quality Improvement through Prevention Efforts Nath T. K., Achutha Naikan V. N. By R&D Quality Quest Vol.5, No.2 pp 5-16 (2003)
Ergonomic Design of Indian Cycle Rickshaw A., Achutha Naikan V. N. By Industrial Engineering Journal Vol.32, No.2 pp3-7 (2003)
Implementation of Cost of Quality Among Indian Industries: A Survey Nath T. K., Mahanty B. , Achutha Naikan V. N. By International Journal of Manufacturing Technology and Management Vol. 5, No. 5/6 pp 579-592 (2003)
Optimum Design of Component Tolerances of Assemblies Using Constraint Networks Yang C. C., Achutha Naikan V. N. By International Journal of Production Economics Vol. 84, No.2 pp149-163 (2003)
Optimum Tolerance Design for Complex Assemblies using Hierarchical Interval Constraint Networks Yang C. C., Achutha Naikan V. N. By International Journal of Computers and Industrial Engineering Vol. 45 pp 511-543 (2003)
Optimum Tolerance Design using Constraint Networks and Relative Sensitivity Algorithm Yang C. C., Achutha Naikan V. N. By International Journal of Applied Artificial Intelligence Vol.17, No.7 pp 631-669 (2003)
Maintainability and Reliability Analysis of a Fleet of Shovels Roy S. K., Achutha Naikan V. N., Bhattacharya M. M. By Mining Technology, International Journal of Institutions of Materials, Minerals and Mining, UK Vol. 110, No. 3 pp A163-A171 (2001)
Machinery Selection Process Capability and Product Reliability Dependence Murty A. S., Achutha Naikan V. N. By International Journal of Quality and Reliability Management Vol.14, No.4 pp381-390 (1997)
Reliability Strength Design Through Inverse Distributions Exponential and Weibull Cases Murty A. S., Achutha Naikan V. N. By International Journal of Reliability Engineering & System Safety Vol 51, No.1 pp 77-82 (1996)
Condition Monitoring Strategy A Risk Based Interval Selection Murty A. S., Achutha Naikan V. N. By International Journal of Production Research Vol.34, No.1 pp 285-296 (1996)
Availability and Maintenance Cost Optimization of a Production Plant Murty A. S., Achutha Naikan V. N. By International Journal of Quality and Reliability Management Vol.12, No.2 pp28-35 (1995)
Inverse Distributions in Reliability Design A Revisit Murty A. S., Achutha Naikan V. N. By International Journal of Reliability Engineering & System Safety Vol. No.44 pp167-171 (1994)

Conferences

Series Arc Fault Detection in Low Voltage Distribution System with Signal Processing and Machine Learning Approach Gupta A.K., Routray A., Naikan V.N.A. By IECON Proceedings (Industrial Electronics Conference) 2021-October - (2021)
Accelerated Failure Time Models with Corrective and Preventive Maintenance for Repairable Systems Subject to Imperfect Repair Syamsundar A., Naikan V.N.A., Couallier V. By Lecture Notes in Mechanical Engineering 143-152 (2020)
An integrated approach for fuzzy failure mode and effect analysis using fuzzy AHP and fuzzy MARCOS Boral S., Chaturvedi S.K., Howard I.M., McKee K., Naikan V.N.A. By IEEE International Conference on Industrial Engineering and Engineering Management 2020-December 395-400 (2020)
Assessment of Maintenance Effectiveness for Repairable Systems: PM and CM Case Studies Syamsundar A., Naikan V.N.A. By 2020 Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling, APARM 2020 - (2020)
Multi-methodological approach for selection of risk mitigation strategy in trucking industry: Truck drivers Perspective Dadsena K. K., Sarmah S. P., Achutha Naikan V. N. By INFORMS Annual Meeting - (2018)
Sensitivity of rotor slot harmonics due to inter-turn fault in induction motors through vibration analysis Kumar T. A., Singh G. , Achutha Naikan V. N. By 5th Biennial International Conference on Emerging Trends in Engineering, Science and Technology - (2018)
Sensitivity of rotor slot harmonics due to inter-turn fault in induction motors through vibration analysis Anil Kumar T.C., Singh G., Naikan V.N.A. By Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018 1-3 (2018)
Effective combination of motor fault diagnosis techniques Gugaliya A., Singh G., Naikan V.N.A. By Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018 1-5 (2018)
Effective Combination of Motor Fault Diagnosis Techniques Gugaliya A., Singh G. , Achutha Naikan V. N. By 5th Biennial International Conference on Emerging Trends in Engineering, Science and Technology - (2018)
Effective Combination of Motor Fault Diagnosis Techniques. Gugaliya A., Singh G. , Achutha Naikan V. N. By 5th Biennial International Conference on Emerging Trends in Engineering, Science and Technology - (2018)
A non intrusive methodology for bearing current detection in PWM inverter fed induction motor drive Singh G., Anil Kumar T.C., Naikan V.N.A. By Proceedings of 2018 IEEE International Conference on Power, Instrumentation, Control and Computing, PICC 2018 1-6 (2018)
A non-intrusive methodology for bearing current detection in PWM inverter fed induction motor drive Singh G., Kumar T. A., Achutha Naikan V. N. By International Conference on Power, Instrumentation, Control and Computing (PICC) - (2018)
IEOM Detroit Conference Achutha Naikan V. N., V. H. By IEOM Detroit Conference - (2016)
International Conference on Power Systems (ICPS) Achutha Naikan V. N., Anil Kumar T. C., Singh G. By - (2016)
International Conference on Power Systems (ICPS) Achutha V. N., Singh G. , Anil Kumar T. C. By International Conference on Power Systems (ICPS) - (2016)

Fault diagnosis of Induction motor cooling system using infrared thermography Singh, Gurmeet, Kumar,T. CH. Anil, & Naikan By Power Systems (ICPS), International Conference on (Accepted and Presented). IEEE - (2016)
Effectiveness of Vibration and Current Monitoring in detecting Broken Rotor Bar and Bearing Faults in an Induction Motor Kumar,T. CH. Anil, Singh, Gurmeet, & Naikan, V. N. A. By Power Systems (ICPS), International Conference on (Accepted and Presented). IEEE - (2016)
Effectiveness of Current Envelope analysis to detect broken rotor bar and inter turn faults in an inverter fed induction motor drive Singh, G., Kumar, C. A., & Naikan, V. N. A. By International Conference on Power and Advanced Control Engineering (ICPACE) IEEE pp. 191-194 (2015)
Multiple fault scenario analysis in rotating machinery assets by applying design of experiments on vibration data Joydeep Majumdar, V. N .A. Naikan, P.K. Ray By 27th International Congress of Condition Monitoring and Diagnostic Engineering Management, Australia, Queensland, Brisbane, September- 16 - 18 - (2014)
Accelerated Life Testing of Aluminum Electrolytic Capacitors: Effect of Applied Voltage on Life A. Rathore and V.N.A. Naikan By SRESA National Conference on Reliability and Safety Engineering, Thiruchirapally pp. 79-82 (2014)
Shaft misalignment detection by thermography S. Fatima, A. R. Mohanty and V.N.A. Naikan By Proceedings of the 21th International Congress on, Beijing, China, July 13-17 - (2014)
Virtual Fault Simulation for Bearing Defects of Various Types of Rotating Machine D. P. Behera, Reshmi Behera and V.N.A. Naikan By 5th International Conference- Confluence The Next Generation Information Technology Summit (Confluence), IEEE explore , pp. 726-730 (2014)
Virtual Fault Simulation for Diagnosis of Shaft Misalignment of Rotating Machine D. P. Behera, Reshmi Behera and V.N.A. Naikan By International Conference on Advances in Computing, Communications and informatics (ICACCI, 24-27 Sept. 2014) pp. 2476-2480 (2014)
Virtual Fault Simulation for Sympathetic Vibrations of Rotating Machine D. P. Behera and V.N.A. Naikan By IEEE International Advance Computing Conference (IACC) pp. 905-910 (2014)
Environmental Study on Battery Performance at Low Temperature, SRESA B. Mago and V.N.A. Naikan By National Conference on Reliability and Safety Engineering, Thiruchirapally pp. 37-43 (2014)
Effective time domain features for distinguishing coupling effects on misaligned shaft V.N.A. Naikan By Proceedings of Acoustics, New Delhi, November 10-15 - (2013)
Methodology adopted to improve reliability in satellite integration by optimizing parameters of orbital TIG welding M. Karthikeyan, R. Narayan, and G. Narayanan and V.N.A. Naikan By National Propulsion Conference, IIT Madras, Feb 21-23 - (2013)
Most Effective Transducer Locations for Permanent Health Monitoring of A Rotating Machine S. Fatima, A. R. Mohanty and V.N.A. Naikan By 20th International Congress on Sound and Vibration to be held at Bangkok, Thailand, July 7-11 - (2013)
Failure mode identification and analysis of electronic sensors S. P. Panchangam and V.N.A. Naikan By International Conference on Advances in Electronics and Bio-Medical Engineering, Pondicherry, India - (2012)
Reliability Analysis of Hall Effect Current Sensor System S. P. Panchangam and V.N.A. Naikan By International Conference on Optimization Modeling and Applications (OPTIMA-2012), New Delhi - (2012)
Reliability modeling of sensors network system for critical applications S. P. Panchangam and V.N.A. Naikan By Intl. conf. on Engineering, Technology and Management, the 2nd International Conference on Advances in Electronics Engineering, Tirupati, Sept. 7-8 - (2012)
A hybrid Markov system dynamics approach for availability analysis of degraded systems M.S. Rao and V.N.A. Naikan By Proceedings of Intl. Conf. on Industrial Engineering & Operations Management, Kuala Lumpur, Malaysia pp. 1160-1165 (2011)
General Repair Models for Maintained Systems Syamsundar A., K. Muralidharan and V.N.A. Naikan By International Statistics Conference, Colombo, December 28-30 - (2011)
Imperfect repair accelerated failure time models with time varying covariates for maintained systems Syamsundar A., D. E. V. Kumar, and V.N.A. Naikan By Acc 7th International Conference on Modelling in Industrial Maintenance and Reliability, MIMAR 2011, Sidney Sussex College, University of Cambridge UK, April 18-20 - (2011)
Reliability Improvement Through Failure Mode Effects And Criticality Analysis On Electric Propulsion Feed System M. Karthikeyan, M.M. Nayak, R. Narayan, K.M. Shanbhouge and V.N.A. Naikan By National conference on Electric Propulsion system, ISRO Bangalore, February 23-24 - (2011)
A system thinking approach for time dependent availability analysis of multi-component systems M.S. Rao and V.N.A. Naikan By Second International Conference on Reliability, Safety & Hazard, Mumbai pp. 162-167 (2010)
Imperfect repair accelerated failure time processes for maintained systems Syamsundar A., E. Vijay Kumar and V.N.A. Naikan By Second International Conference on Reliability, Safety & Hazard, Mumbai - (2010)
Point Process Based Maintenance Modeling for Repairable Systems: A Review V.M.S. Hussain and V.N.A. Naikan By Proceedings of the 2010 International Conference on Industrial Engineering and Operations Management, Dhaka, Bangladesh pp. 418-426 (2010)
Reliability and life prediction for electronic connectors for control applications P.V. Varde, M. Agarwal, P.P. Marathe, U. Mohapatra, and R.C. Sharma and V.N.A. Naikan By Second International Conference on Reliability, Safety & Hazard, Mumbai - (2010)
System Dynamics simulation based hybrid approach for reliability analysis M.S. Rao and V.N.A. Naikan By Proceedings of the27th International Conference of the System Dynamics Society, Albuquerque, New Mexico, USA, July 26 - 30 - (2009)
A soft computing approach for reliability analysis of repairable systems M.S. Rao and V.N.A. Naikan By ICAME S. V. National Institute of Technology, Surat, Dec.15-17 - (2008)
A system dynamics based soft computing approach for Reliability analysis of systems M.S. Rao and V.N.A. Naikan By International Conference on Operations Research for a growing Nation, ORSI, Tirupati, December 14-17 - (2008)
Hierarchical Segmented Point Process Models with multiple change points for Maintained Systems Syamsundar A. and V.N.A. Naikan By International Conference on Present Practices and Future Trends in Quality and Reliability (ICONQR 08), January 21-25 - (2008)
Modelling of maintained systems using segmented point processes Part 2 Syamsundar A. and V.N.A. Naikan By International Conference on Reliability Safety and Quality Engineering (ICRSQE) - (2008)
A Hybrid Segmented Model for Maintained System Syamsundar A. and V.N.A. Naikan By Proceedings of the INCRESE, Udaipur PP 572-590 (2007)
A Reliability Analysis Methodology at Design Stage of Systems M.S. Rao and V.N.A. Naikan By Proceedings of the INCRESE, Udaipur PP 663-671 (2007)
A study of the Key Factors influencing Software Quality Neelesh Bhattacharya and V.N.A. Naikan By International Conference on Modeling and Simulation, August (2007) - (2007)
Propagation analysis of data-errors using data flow diagrams Neelesh Bhattacharya and V.N.A. Naikan By Flow Graph, National Conference on Mathematical and Modeling Optimization and their Application, OptiMA, Feb 28-29 - (2007)
Modern software testing methods for the analysis of high-risk applications Neelesh Bhattacharya and V.N.A. Naikan By International conference on Reliability and Safety Engineering, Chennai pp 357-367 (2006)
An Algorithm for Simultaneous Optimization of Load Sharing Repairable K-out-of-N System P.N.S. Rao and V.N.A. Naikan By CONQUEST-2006, Hyderabad Vol II pp. 274 - 284 (2006)
Application of basic reliability models for a process industry M.S. Rao and V.N.A. Naikan By Proceedings of 2nd International conference INCRESE, Chennai, December 18-20 - (2006)
Application of reliability models for a process industry M. Srinivasa Rao and V.N.A. Naikan By International conference on Reliability and Safety Engineering, Chennai, , pp 426-433 (2006)
Crain wise analysis of wheel assembly failures using point process A. Syamsundar and V.N.A. Naikan By International conference on Reliability and Safety Engineering, Chennai, December 18-21 pp 80-91 (2006)
Crane wise analysis of wheel assembly failures using Point Processes A. Syamsundar and V.N.A. Naikan By Proceedings of 2nd International Conference in Reliability and Safety Engineering, Chennai, pp 80-91 (2006)
An Algorithm for Simultaneous Optimization of K-out-of-N Repairable System P.N.S. Rao and V.N.A. Naikan By International Conference on Reliability, Statistics and related fields (ICRSRF), January 7 - 9, - (2005)
Generalized Preventive Maintenance Policies for Markov Deteriorating Systems P.N.S. Rao and V.N.A. Naikan By INCRESE 2005, Bhubaneswar, Dec. 21-23 - (2005)
Maintenance Cost Benefit Analysis of Production Shops - An Availability Based Approach P.N.S. Rao and V.N.A. Naikan By In Proceedings-Annual Reliability and Maintainability Symposium, Alexandria, United States, IEEE RAMS pp. 404 - 409 (2005)
Statistical quality control based expert system for a process industry M.S. Rao and V.N.A. Naikan By Proceedings of 2nd International conference INCRESE, Bhubaneswar, December 19-21 - (2005)
Reliability Modelling of Lubrication Oil S. Kapur and V.N.A. Naikan By All-India conference on Condition Based Maintenance, Calcutta, December 3-4 - (2004)
Repairable system reliability prediction using neural networks P.V. Sasatte, R.B. Misra and V.N.A. Naikan By 34th International Conference on Computers and Industrial Engineering, Jeju, Korea, March 25-27 - (2004)
Repairable system reliability prediction using neural networks P.V. Sasatte, R.B. Misra and V.N.A. Naikan By 33rd International Conference on Computers and Industrial Engineering, Jeju, Korea, March 25-27 - (2004)
Cost Optimal Allocation and Rationing in Supply Chains C.C. Yang and V.N.A. Naikan By 33rd International Conference on Computers and Industrial Engineering, Jeju, Korea, March 25-27 - (2004)
Availability evaluation and maximization of production shops with large number of machines V.N.A. Naikan By All India Conference on Maintenance and Reliability, November 27-28 - (2003)
Implementing reliability - centered maintenance in Indian industries S.S. Jaglan and V.N.A. Naikan By All India Conference on Maintenance and Reliability, November 27-28 - (2003)
Application of Hierarchical Interval Constraint Networks for Optimization of Tolerance Allocation C.C Yang and V.N.A. Naikan By The fourth Asia-Pacific Conference on Industrial Engineering and Management Systems, December 18-20, Taipei - (2002)
Pilot Project on Cost of Quality T. Nath, B. Mahanty and V.N.A. Naikan By International Conference on Integrating World Markets: Living Excellence Through Technology and Beyond, School of Management Studies, MNREC, Allahabad pp1.30-1.37 (2002)
Application of TPM Activities in Indian Jute Industry for Productivity Improvement S. Kriskna, S. Sahu and V.N.A. Naikan By 12th world productivity congress,hong kong, beijing,5-10 November - (2001)
System Dynamics Modeling for Quality Management Systems T. Nath, B. Mahanty and V.N.A. Naikan By 19th All India Manufacturing Technology Design & Research Conference, Indian Institute of Technology, Madras, December 14-16 - (2000)
High Temperature Accelerated Life Tests on Electrolytic Capacitors V.N.A.Naikan By International Conference on Reliability, Maintainability, and Safety,Beijing, China,May 18-21 - (1999)
Reliability, Availability, and Maintainability Studies of a Fleet of 10 m3 Electric Rope Shovel S.K Roy and V.N.A. Naikan By International Conference on Management of Mining machinery,Calcutta pp157-177 (1999)
Reliability Evaluation of Electrolytic Capacitors by Life Testing at High Temperature V.N.A. Naikan By 23rd National systems Conference, Banarus Hindu University, Varanasi, pp 81-85 (1999)
Maintainability Concepts in high Reliability Electronic Equipment P. Kulkarni, P. Dhar and V.N.A. Naikan By INS Valsura, Jamnagar pp. 26-36 (1996)
A Temperature Monitoring Strategy for Quick Fault Location in a production Machine A.S.R. Murty and V.N.A. Naikan By National Conference on Condition Monitoring, National Productivity Council, Madras, VE1-5, - (1991)
Trends in Steam Turbine Monitoring, National Conference on Condition Monitoring A.S.R. Murty and V.N.A. Naikan By National Productivity Council, Madras, IID1-5 - (1991)
Condition Monitoring Techniques A.S.R. Murty, Satish Kumar and V.N.A. Naikan By National Conference on Condition Monitoring, Engineers India Limited, Nagpur - (1989)

Subir Chowdhury School of Quality and Reliability

Faculty

Research Areas

Ph. D. Students

Amandeep Nagpal

Anuj Kumar Goel

Ch Anil Kumar

Monojit Das

Namrata Mohanty

Satya Brot Sen

Subir Kumar Patra