Metallurgical and Materials Engineering

• Institute Silver Medal IIT KGP
• Marie Curie Fellowship, Europe
• Young Scientist Award, Germany
• Deutsche Bank JuniorAward 2009
• IEI Young Engineers Award 2011

Journal
• Effect of cold working on the rate sensitivity in high entropy lamellar CoCrFeNi(Nbx/Tay) eutectic composites Chanda B., Das J. By Materials Science and Engineering: A 864 144557- (2023)
• Evolution of microstructure, magneto-structural transformation, and magnetocaloric effect in (Fe72-0.9xNi8-0.1xCo8)Zr7B4Cu1Gax (0 x 6 at.%) alloys Jana P. P., Anand K. , Chanda B. , Chelvane J. A., Das J. By Materials Science & Engineering B 287 116121- (2023)
• Effect of cold rolling on the serrated flow behavior of Zr41.2Ti13.8Cu12.5 Ni10Be22.5 bulk metallic glass during nanoindentation Gunti A., Das J. By Journal of Materials Research 37 976-989 (2022)
• Effect of testing conditions on the nanomechanical behavior of surface and inner core of as-cast Zr-base bulk metallic glassy plates Gunti A., Das J. By Materials Science and Engineering: A 845 143206- (2022)
• Size effect and anisotropy in cold rolled Zr-base bulk metallic glasses during nanoindentation Gunti A., Das J. By Journal of Non-Crystalline Solids 593 121767- (2022)
• Enhanced magnetocaloric effect in Fe-rich (NixFe1-x) 70.5 B17. 7Si7. 8Ti4 (x= 0.3 and 0.4) mechanically alloyed nanocrystalline powder Anand K. S., Das J. By Journal of Magnetism and Magnetic Materials 541 168574- (2022)
• Evolution of microstructure homogeneity and mechanical properties in nano-/ultrafine eutectic CoCrFeNiNbx (0.45 x 0.65) high entropy alloy ingots and cast rods Chanda B., Das J. By Journal of Alloys and Compounds 901 163610- (2022)
• Exchange bias effects and a large magnetocaloric effect arising out of the second-order transition in suction cast Ni50Mn36Sn14 Goswami D., Anand K. , Chattopadhyay S. , Das J. By Journal of Materials Research 37 4071-4083 (2022)
• Observation of a large magnetocaloric effect and suppressed transition in Ti doped Ni-Co-Mn-Sn ribbons upon annealing Goswami D., Potnis G. , Chattopadhyay S. , Das J. By Journal of alloys and compounds 917 165490-165490 (2022)
• Observation of superspin-glass behaviour and metamagnetic transition in spark plasma-sintered Ni50 x Co x Mn40Sn10 (x = 3, 5, 7, and 9 at.%) Anand K., Goswami D. , Das J. By Journal of Materials Research 37 1513-1519 (2022)
• Mechanism of microstructure evolution and spheroidization in ultrafine lamellar CoCrFeNi(Nb0·5/Ta0.4) eutectic high entropy alloys upon hot deformation Chanda B., Pani S. K., Das J. By Materials Science and Engineering A 835 142669- (2022)
• Carbon nanotubes, nanochains and quantum dots synthesized through the chemical treatment of charcoal powder Kumar S., Das J. By Journal of Molecular Structure 1227 129419-129419 (2021)
• Strengthening ultrafine lamellar Ni-Zr-(Al) eutectic by precipitation hardening Dutta A., Barman D. , Das J. By Journal of Alloys and Compounds 882 160684-160684 (2021)
• Superior oxidation resistance of ultrafine Ni Zr-(Al) eutectic composites in the temperature range of 500 900° C Dutta A., Das J. By Journal of Alloys and Compounds 854 155998-155998 (2021)
• Effect of Cold Rolling on the Evolution of Shear Bands and Nanoindentation Hardness in Zr41.2Ti13.8Cu12.5Ni10Be22.5 Bulk Metallic Glass Gunti A., Jana P. P., Das J. By Nanomaterials 11 1670-1670 (2021)
• Effect of cold rolling on the pressure coefficient of glass transition temperature in bulk metallic glasses Jana P. P., Eckert J. , Das J. By Thermochimica Acta 706 179071- (2021)
• Synthesis, structural and magnetic properties of NiO nanospheres and rGO-NiO nanocomposites and observing magnetocaloric effect in rGO-NiO nanocomposites Kumar S., Das J. By Materials Science and Engineering B 256 115007-115007 (2021)
• A tool to predict the evolution of phase and Young s modulus in high entropy alloys using artificial neural network Chanda B., Jana P. P., Das J. By Computational Materials Science 197 110619-110619 (2021)
• A review on nano-/ultrafine advanced eutectic alloys Chanda B., Potnis G. S., Jana P. P., Das J. By Journal of Alloys and Compounds 827 154226-50 (2020)
• Strain rate sensitivity and deformation mechanism of nano-lamellar -Ni/Ni5Zr eutectic at room temperature Dutta A., Das J. By Journal of Materials Research 35 2777-2788 (2020)
• Effect of Moist Air and Minor Zr Addition on Oxidation Behavior of Arc-Melted Multiphase Mo Si B Alloys in the Temperature Range of 1000° C 1300° C Kumar N. K., Das J. , Mitra R. By Oxidation of Metals 93 483-513 (2020)
• Synthesis of a robust multifunctional composite with concurrent magnetocaloric effect and enhanced energy absorption capabilities through a tailored processing route Goswami D., Anand K. S., Jana P. P., Ghorai S. K., Chattopadhyay S. , Das J. By Materials and Design 187 108399-108408 (2020)
• Effect of moist environment on the oxidation behavior of Mo76-xSi14B10Fex (x = 0, 0.5, 1 at.%) ultrafine composites in the range of 700 800 °C Kumar N., Mitra R. , Das J. By Corrosion Science 155 86-96 (2019)
• Accurate measurement of glass transition temperature of Cu47.5Zr47.5Al5 and Zr41.2Ti13.8Cu12.5Ni10 Be22.5 using step-scan modulated differential scanning calorimeter Jana P., Das J. By Journal of Alloys and Compounds 800 314-319 (2019)
• Effect of Zr addition on microstructure, hardness and oxidation behavior of arc-melted and spark plasma sintered multiphase Mo-Si-B alloys Kumar N., Das J. , Mitra R. By Metallurgical and Materials Transactions A 50A 2041-2060 (2019)
• Effect of Zr addition on microstructure, hardness and oxidation behavior of arc-melted and spark plasma sintered multiphase Mo-Si-B alloys Kumar N. K., Das J. , Mitra R. By Metallurgical and Materials Transactions A 50A 2041-2060 (2019)
• Facile synthesis of CuO nanowires and Cu2O nanospheres grown on rGO surface and exploiting its photocatalytic, antibacterial and supercapacitive properties Kumar S., Ojha A. , Bhorolua D. , Das J. , Kumar A. , Hazarika A. By Physica B: Condensed Matter 558 78-81 (2019)
• Improvement of intrinsic plasticity and strength of Zr55Cu30Ni5Al10 metallic glass by modulating the glass transition temperature Jana P., Gunti A. , Das J. By Materials Science and Engineering A 762 138102-7 (2019)
• Assessing two rapid quenching techniques for the production of La-Fe-Si magnetocaloric alloys in reduced annealing time Potnis G., Krautz M. , Waske A. , Das J. , Eckert J. By Material Design & Processing Communications 1 1-9 (2019)
• An assessment on the stability of the eutectic phases in high entropy alloys Chanda B., Das J. By Journal of Alloys and Compounds 798 167-173 (2019)
• Effect of cooling rate and composition on the microstructure and mechanical properties of (Ni0.92Zr0.08)100 xAlx (0 x 4 at.%) ultrafine eutectic composites Dutta A., Jana P. P., Das J. By Journal of Material Research 1-10 (2019)
• Effect of Fe addition and moist environment on the high temperature oxidation behavior of Mo76-xSi14B10Fex (x = 0, 0.5, 1 at.%) composites Kumar N., Mitra R. , Das J. By Intermetallics 111 106498-9 (2019)
• Correlating the lattice parameter and Curie temperature of -Ni in Fe-Ni- base alloys Anand K., Goswami D. , Jana P. , Das J. By AIP Advances 9 055126-3 (2019)
• Nano-/Ultrafine Eutectic in CoCrFeNi(Nb/Ta) High-Entropy Alloys Chanda B., Verma A. , Das J. By Transactions of the Indian Institute of Metals 71 2717-2723 (2018)
• Precise estimation of glass transition and crystallization temperatures of Zr55Cu30Ni5Al10 metallic glass using step-scan modulated temperature differential scanning calorimeter Jana P. P., Das J. By Thermochemica Acta 660 18-22 (2018)
• The effect of milling time on the evolution of nanostructure, thermal stability, and magnetocaloric properties of (Ni0.50Fe0.50)70.5B17.7Si7.8Ti4 Anand K., Jana P. P., Prabhu D. , Das J. By Journal of Alloys and Compounds 772 157-163 (2018)
• Influence of Nb on the microstructure and fracture toughness of (Zr0.76Fe0.24)100-xNbx nano-eutectic composites Maity T., Dutta A. , Jana P. P., Prashanth K. , Eckert J. , Das J. By Materials 11 1-9 (2018)
• Surface modification of La (Fe, Si)13 with copper using dry coating technique for magnetocaloric regenerators Saha S., Wuppulluri M. , Krautz M. , Thielsch J. , Das J. , Waske A. , Seifert J. , Schinke L. By AIP Conference Proceedings 1992 030008-030008 (2018)
• Composition dependence on the evolution of nanoeutectic in CoCrFeNiNbx (0.45 x 0.65) high entropy alloys Chanda B., Das J. By Advanced Engineering Materials 1700908 1-9 (2017)
• Strengthening face centered cubic crystals by annealing induced nano-twins Roy B., Das J. By Scientific Reports 7 17512- (2017)
• High temperature oxidation response of Al/Ce doped Mo Si B composites Das J., Roy B. , Kumar N. , Mitra R. By Intermetallics 84 101-109 (2017)
• Improvement of oxidation resistance of arc-melted Mo76Si14B10 by microstructure control upon minor Fe addition Kumar N., Roy B. , Mitra R. , Das J. By Intermetallics 88 28-30 (2017)
• Facile synthesis of CdO nanorods and exploiting its properties towards supercapacitor electrode materials and low power UV irradiation driven photocatalysis against methylene blue dye Kumar S., Ahmed B. , Ojha A. , Das J. , Kumar A. By Materials Research Bulletin 90 224-231 (2017)
• Tunable (violet to green) emission by high-yield graphene quantum dots and exploiting its unique properties towards sun-light-driven photocatalysis and supercapacitor electrode materials Kumar S., Ojha A. , Ahmed B. , Kumar A. , Das J. , Materny A. By Materials Today Communications 11 76-86 (2017)
• Synthesis of mullite-based coatings from alumina and zircon powder mixtures by plasma spraying and laser remelting, Hazra S., Das J. , Bandyopadhyay P. P. By Material Chemistry and Physics 154 22-29 (2014)
Workshop
• Evolution of nano eutectic microstructure in CoCrFeNiTax (0.2 < x < 0.5) high entropy alloys Chanda B., Das J. By 3rd International workshop on high entropy materials (IWHEM- 2020) - (2020)
Congress
• Effect of casting thickness on the microstructure homogeneity of nano-/ultrafine (Ni0.92Zr0.08)100-xAlx (0 x 4 at.%) eutectic composites Dutta A., Barman D. , Das J. By European Congress and Exhibition Advanced Materials and Processes (EUROMAT 2019) - (2019)
Symposium
• Studies on the inhomogeneous deformation behavior of Zr55Cu30Ni5Al10 and Cu47.5Zr47.5Al5 bulk metallic glasses at room temperature Jana P. P., Das J. By 26th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM) - (2019)
• Effect of microstructure on the strain rate sensitivity and deformation mechanism in nano- eutectic CoCrFeNi (Nb/Ta) high entropy alloys Chanda B., Das J. By 26th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM) - (2019)
• Effect of milling time on the microstructural, thermal stability, thermomagnetic and magnetocaloric propertiesof mechanically alloyed (Fe0.50Ni0.5)70.5B17.7Si7.8Ti4) Anand K., Das J. By 26th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM) - (2019)
• Indentation size effect and related mechanisms in Vitrelloy-1 , Studies on the inhomogeneous deformation behavior of Zr55Cu30Ni5Al10 and Cu47.5Zr47.5Al5 bulk metallic glasses at room temperature Gunti A., Das J. By 26th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM) - (2019)
• The microstructural modification in differently solidified (Ni0.92Zr0.08)100-xAlx (0 x 4 at.%) nano-/ultrafine eutectic composites Dutta A., Das J. By 26th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM) - (2019)
Conferences
• Structural, Calorimetric, Thermomagnetic and Magnetocaloric Properties of Mechanically Alloyed (FexNi1-x)70.5B17.7Si7.8Ti4 (x=0.5,0.6,0.7) Anand K., Das J. By 10th International Conference on Materials for Advanced Technologies (ICMAT 2019) - (2019)
• Enhancement of structural transition induced vibration-damping capacity in Ni-Mn-Ga-polysulfone composite Goswami D., Chattopadhyay S. , Das J. By 26th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM) - (2019)
• Evolution of nanoeutectic and phase stability in CoCrFeNiNbx (0.45 x 0.65) high entropy alloys Chanda B., Das J. By 25th International Symposium for Metastable, Amorphous and Nanostructured Materials (ISMANAM 2018), - (2018)
• Measurement of glass transition temperature of metallic glasses using step- scan modulated temperature differential scanning calorimetry Jana P. P., Das J. By 25th International Symposium for Metastable, Amorphous and Nanostructured Materials (ISMANAM 2018) - (2018)
• Methodical assessment of glass transition temperature of metallic glasses using modulated temperature differential scanning calorimetry Jana P., Das J. By 56th National Metallurgist Day (NMD) Conference and 72th Annual Technical Meeting (ATM) - (2018)
• Assessing two rapid quenching techniques for the production of magnetocaloric alloys Potnis G. S., Das J. , Kratz M. , Gebert A. , Waske A. , Eckert J. By 25th International Symposium for Metastable, Amorphous and Nanostructured Materials (ISMANAM 2018) - (2018)
• Nano-/ultrafine eutectic and their composites in high entropy alloys Das J., Chanda B. By International Conference on Solidification Science and Processing (ICSSP) - (2018)
• Effect of ball milling on the magnetocaloric performance of a NiMnGa alloy Goswami D., Chattopadhyay S. , Das J. By 56th National Metallurgist Day (NMD) Conference and 72th Annual Technical Meeting (ATM) - (2018)
• Effect of milling time on microstructural and room temperature soft magnetic properties of mechanically alloyed (Fe0.50Ni0.5)70.5B17.7Si7.8Ti4 alloy Anand K., Das J. By 56th National Metallurgist Day (NMD) Conference and 72th Annual Technical Meeting (ATM - (2018)
• Implementing rapid quenching technique for the production of La-Fe-Si magnetocaloric alloys in reduced annealing time Potnis G., Krautz M. , Waske A. , Eckert J. , Das J. By 56th National Metallurgist Day (NMD) Conference and 72th Annual Technical Meeting (ATM) - (2018)
• Enhanced vibration damping capabilities of a NiMnGa - Polysulfone composite material Goswami D., Das J. , Chattopadhyay S. By Innovation in Materials Science and Technology (IMST - (2018)
• Evolution of eutectic microstructure in high entropy CoCrFeNiNbx (0.45 x 0.65) alloys Chanda B., Das J. By 56th National Metallurgist Day (NMD) Conference and 72th Annual Technical Meeting (ATM) - (2018)

Principal Investigator

• Processing and characterization of bulk nanostructured brass
• PROCESSING, CHARACTERIZATION AND DEFORMATION OF TI-FE (SN) ULTRAFINE EUTECTIC COMPOSITES
• Development of shape memory magneto-caloric alloys for magnetic and other applications: A non-conventional source of energy (SGBSI)
• Studies on the deformation mechanism and evolution of the plasticity in nano/-ultrafine lamellar composites (SGIRG)
• High resolution x-ray diffraction laboratory
• Development of Ni-base ultrafine composites
• Investigation of Graphene Based Transition Metal Oxide Nanocomposites as Magnetocaloric Materials for Room Temperature Magnetic Refrigeration Applications
• High-entropy Nano-eutectic Composites: Development of a New Class of High Strength Structural Alloys

Co-Principal Investigator

• An investigation on causes for emergence of cracks in cast Pb-5 wt.% Sb alloy spine and its possible solutions
• Comparative study of the isothermal/cyclic oxidation behavior of molybdenum sillicide based alloys and composites in wet and dry air and effect of prior oxidation on their creep strengths