Metallurgical and Materials Engineering

• Indranil Award for Metallurgy
• Bengal Ingot Silver Medal
• Ava Sanyal Memorial Award
• J C Ghosh Memorial Prize Award
• Institute Silver Medal

Journal
• Temporal evolution of precipitate in HAYNES 282 during ageing: growth and coarsening kinetics, solute partitioning and lattice misfit Mukherjee S., Sahu B. P., Sarkar S. K., Ahlawat S. , Biswas A. , Mandal G. K., Tarafder S. , Kar S. K. By Acta Materialia - (Accepted/In-Press)
• Multi-stage drawing and post-forming behavior of solution treated Cu-0.5Cr-0.05Zr-0.05Ti alloy sheet for the fabrication of space application Behera D. R., Katiyar B. S., Murty S. N., Kar S. K., Panda S. K. By Materials Science and Engineering A - (Accepted/In-Press)
• Influence of monomodal K2CO3 and bimodal K2CO3 + NaCl as space holders on microstructure and mechanical properties of porous copper Ray S., Jana P., Kar S.K., Roy S. By Materials Science and Engineering A 862 - (2023)
• Analysis of Surface Strain Distribution over the Biaxial Stretch-Formed and Deep-Drawn Cups of Cu-Cr-Zr-Ti Alloy Thin Sheet Behera D. R., Panda S. K., Kar S. K., Tharian T. K., Murty S. N. By International Conference on Product Life Cycle Modelling, Simulation and Synthesis (PLMSS) - Product Life Cycle Space Systems Perspective 1-8 (2023)
• Temporal evolution of precipitate in HAYNES 282 during ageing: growth and coarsening kinetics, solute partitioning and lattice misfit Mukherjee S., Sahu B.P., Sarkar S.K., Ahlawat S., Biswas A., Mandal G.K., Tarafder S., Kar S.K. By Materialia 26 - (2022)
• Creep-Fatigue Response, failure mode and deformation mechanism of HAYNES 282 Ni based superalloy: Effect of dwell position and time Mukherjee S., Kar S. K., Sivaprasad S. , Tarafder S. , Viswanathan G. B., Fraser H. L. By International Journal of Fatigue 159 1-18 (2022)
• Study of the elastic properties of porous copper fabricated via the lost carbonate sintering process Jana P., Ray S. , Goldar D. , Kota N. , Kar S. K., Roy S. By Materials Science and Engineering A 836 1-14 (2022)
• Influence of ageing on high temperature tensile deformation of a Ni-based superalloy, HAYNES 282 Mukherjee S., Sivaprasad S., Tarafder S., Bhattacharyya D., Kar S.K. By Journal of Alloys and Compounds 917 - (2022)
• Influence of ageing on high temperature tensile deformation of a Ni-based superalloy, HAYNES 282 Mukherjee S., Sivaprasad S. , Tarafder S. , Bhattacharyya D. , Kar S. K. By Journal of Alloys and Compounds - (2022)
• Low cycle fatigue behavior and deformation mechanism of different microstructures in Ti-5Al-5Mo-5V-3Cr alloy Sen M., Suman S., Mukherjee S., Banerjee T., Sivaprasad S., Tarafder S., Bhattacharjee A., Kumar Kar S. By International Journal of Fatigue 148 - (2021)
• Atomic Scale Structure Inspired 3D Printed Porous Structures with Tunable Mechanical Response Ambekar R. S., Mohanty I. , Kishore S. , Das R. , Pal V. , Kushwaha B. , Roy A. K., Kar S. K., Tiwary C. S. By Advance Engineering Materials - (2021)
• Creep-fatigue behavior of a newly developed ultra-supercritical steam turbine grade nickel-based superalloy, Haynes 282 Mukherjee S., Barat K., Tarafder S., Sivaprasad S., Kar S.K. By Materials Performance and Characterization 10 - (2021)
• Constitutive modelling and formability prediction of Inconel-718 sheet at elevated temperatures for space applications Prasad K.S., Panda S.K., Kar S.K., Murty S.V.S.N., Sharma S.C. By Advances in Materials and Processing Technologies - (2020)
• Anomalous Dilatometric Response of Hot-Worked Ti-5Al-5Mo-5V-3Cr Alloy: In Terms of Evolution of Microstructure, Texture and Residual Stress Sen M., Kar S.K., Banerjee T., Bhattacharjee A., Dutta A., Banerjee S. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 51 2011-2024 (2020)
• A novel rate based methodology for creep fatigue life estimation of superalloys Barat K., Sivaprasad S., Kar S.K., Tarafder S. By International Journal of Pressure Vessels and Piping 182 - (2020)
• Low-cycle fatigue of IN 718: Effect of waveform Barat K., Sivaprasad S., Kar S.K., Tarafder S. By Fatigue and Fracture of Engineering Materials and Structures 42 2823-2843 (2019)
• Prediction Capability of Constitutive Models for Inconel 718 Sheets Deformed at Various Elevated Temperatures and Strain Rates Prasad S. K., Panda S. K., Kar S. K., Murty S. , Sharma S. C. By Materials Performance and Characterization 8 869-891 (2019)
• Low Transverse Ductility in a New High-Strength Corrosion-Resistant Steel: Microstructure and Texture Poojari G., Kar S.K., Singh S.B., Kadavil T.T., Anoop C.R. By Transactions of the Indian Institute of Metals 72 1453-1457 (2019)
• Tensile deformation mechanism and failure mode of different microstructures in Tiâ 5Alâ 5Moâ 5Vâ 3Cr alloy Sen M., Suman S., Banerjee T., Bhattacharjee A., Kar S.K. By Materials Science and Engineering A 753 156-167 (2019)
• Elevated temperature low cycle fatigue behaviour of Haynes 282 and its correlation with microstructure â Effect of ageing conditions Mukherjee S., Barat K., Sivaprasad S., Tarafder S., Kar S.K. By Materials Science and Engineering A 762 - (2019)
• Prediction of fracture and deep drawing behavior of solution treated Inconel-718 sheets: Numerical modeling and experimental validation Prasad K.S., Panda S.K., Kar S.K., Murty S.V.S.N., Sharma S.C. By Materials Science and Engineering A 733 393-407 (2018)
• High-Temperature Low-Cycle Fatigue Behavior in HAYNES 282: Influence of Initial Microstructure Barat K., Ghosh M., Sivaprasad S., Kar S.K., Tarafder S. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 49 5211-5226 (2018)
• Creep Fatigue Interaction under Different Test Variables: Mechanics and Mechanisms Barat K., S S. , Kar S. K., Tarafder S. By Journal of Testing and Evaluation 46 2521-2539 (2018)
• Thermo-mechanical processing window for β phase recrystallization inTi-5Al-5Mo-5V-3Cr alloy Sen M., Suman S., Kumar M., Banerjee T., Bhattacharjee A., Kar S.K. By Materials Characterization 146 55-70 (2018)
• Effect of solution treatment on deep drawability of IN718 sheets: Experimental analysis and metallurgical characterization Prasad K.S., Panda S.K., Kar S.K., Murty S.V.S.N., Sharma S.C. By Materials Science and Engineering A 727 97-112 (2018)
• Effect of solution treatment on the formability and part performance of IN718 sheet material Prasad K.S., Panda S.K., Kar S.K., Murty S.V.S.N., Sharma S.C. By Advances in Materials and Processing Technologies 4 680-694 (2018)
• Effect of Temperature and Deformation Speed on Formability of IN718 Sheets: Experimentation and Modelling Prasad S. K., Panda S. K., Kar S. K., Singh S. K., Murty S. , Sharma S. C. By IOP Conference Series: Materials Science and Engineering 418 1-8 (2018)
• Microstructures, forming limit and failure analyses of Inconel 718 sheets for fabrication of aerospace components Prasad S., Panda S. K., Kar S. K., Murty S. , Sharma S. C. By Journal of material engineering and performance 26 1-18 (2017)
• Finite Element Validation of Forming Limit Diagram of IN-718 Sheet Metal Prasad K. S., Kamal T. , Panda S. K., Kar S. K., Murty S. , Sharma S. C. By Materials Today 2 2037-2045 (2015)
• Effect of Bending Strain in Forming Limit Strain and Stress of IN-718 Sheet Metal Prasad S., Panda S. K., Kar S. K., Murty S. , Sharma S. C. By Materials Science Forum 830 238-241 (2015)
• Effect of solution treatment and aging on microstructure and tensile properties of high strength β titanium alloy, Ti-5Al-5V-5Mo-3Cr Shashi Shekhar, Rajdeep Sarkar, Sujoy Kumar Kar, Amit Bhattacharjee By Materials and Design 66 596-610 (2015)
• Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy Kaustav Barat, A. Metya , S. Sathpathy, S. Sivaprasad, S. Tarafder and Sujoy Kumar Kar By Materials Science and Engineering A 625 194-204 (2015)
• Influence of boron and nitrogen on microstructure and hardness of heat-affected zone of modified 9Cr 1Mo steel Gleeble simulation study Das C. R., Bhaduri A. K., Lakshmi S. , Chakravarty S. , Kar S. K., Albert S. K. By Welding in the World 59 513-519 (2015)
• Influence of PWHT on toughness of high chromium and nickel containing martensitic stainless steel weld metals M. Divya, C. Das, S. Mahadevan, Shaju Albert, R. Pandian, Sujoy Kar, Arun Bhaduri, and T. Jayakumar By Metallurgical and Materials Transactions A 46A 2554-2567 (2015)
• Microstructure based and temperature dependent model of flow behavior of a polycrystalline nickel based superalloy Sujoy Kumar Kar, S. K. Sondhi By Materials Science and Engineering: A 601 97-105 (2014)
• Processing-Microstructure-Yield strength correlation in a near beta Ti alloy, Ti-5Al-5Mo-5V-3Cr Sujoy Kumar Kar, Swati Suman, S Sivaprasad, Atanu Chaudhuri, Amit Bhattacharjee By Materials Science and Engineering A 610 171-180 (2014)
• Review of Phase Transformations in Multicomponent Melts, edited by Dieter M. Herlach Kar S. K. By Materials and Manufacturing Processes 28 225-226 (2013)
• Microstructure-fracture toughness correlation in an aircraft structural component alloy Ti-5Al-5V-5Mo-3Cr Ghosh A., Sivaprasad S. , Bhattacharjee A. , Kar S. K. By Materials Science and Engineering: A 568 61-67 (2013)
• Phase Stability in the Mo-Ti-Zr-C system via Thermodynamic Modeling and Diffusion Multiple Validation Sujoy Kumar Kar, Voramon S. Dheeradhada, and Don M. Lipkin By Metallurgical and Materials Transactions A 44 3999 - 4010 (2013)
• Quantitative Microstructural Characterization of a near beta Ti alloy, Ti-5553 under Different Processing Conditions Sujoy Kumar Kar, Atasi Ghosh, Nishant Fulzele, Amit Bhattacharjee By Materials Characterization 81 37-48 (2013)
• Evolution of microstructure and mechanical properties during annealing of cold-rolled AA8011alloy Roy R. K., Kar S. K., Das S. By Journal of Alloys and Compounds 468 122-129 (2009)
• Selection of alpha variants during microstructural evolution in alpha/beta titanium alloys Lee E., Banerjee R. , Kar S. K., Bhattacharya D. , Fraser H. L. By Philos. Mag. A 87 3615-3627 (2007)
• Thermodynamic and microstructural modeling of Nb-Si based alloys Amancherla S., Kar S. K., Bewlay B. P., Yang Y. , Chang A. By Journal of phase equilibria and diffusion 28 2-8 (2007)
• A study of precipitation and recrystallization behavior of aluminum alloy AA1235 Roy R. K., Kar S. K., Das K. , Das S. By Journal of Materials Science 41 1039-1045 (2006)
• Modeling The Tensile Properties in Beta-Processed Alpha/Beta Ti Alloys S. Kar, T. Searles, E. Lee, G.B. Viswanathan, J. Tiley, R. Banerjee, H. L. Fraser By Metallurgical and Materials Transactions A 37A - (2006)
• Root-like Structure at the Nanowire / Substrate Interface in GaAs Nanowires Banerjee R., Bhattacharya A. , Ratan R. , Shah A. P., Gokhale M. R., Arora B. M., Genc A. , Kar S. K. By Appl. Phys. Lett. 88 - (2006)
• Quantification of Alpha Laths in Alpha/Beta Titanium Alloys Williams R. E., Searles T. , Kar S. K., Uchic M. , Dimiduk D. , Fraser H. L. By Microscopy and Microanalysis 11 1662-1663 (2005)
• Rapid Characterization of Titanium Microstructural Features for Specific Modeling of Mechanical Properties Searles T., Tiley J. , Tanner A. , Williams R. , Rollins B. , Lee E. , Kar S. K., Banerjee R. , Fraser H. L. By Measurement Science and Technology 16 - (2005)
• Evolution of In-Situ generated Reinforcement Precipitates In Metal Matrix Composites Sen S., Kar S. K., Catalina A. V., Stefanescu D. M., Dhindaw B. K. By International Conference on Solidification Science and Processing, Emerging Trends 58 709-714 (2005)
• Microstructures and tensile properties of commertial purity aluminum alloy AA1235 under different annealing conditions Roy R. K., Kar S. K., Das K. , Das S. By Materials Letters 59 - (2005)
• Quantification of microstructural features in alpha/ beta Titanium alloys Tiley J., Searles T. , Lee E. , Kar S. K., Banerjee R. , Russ J. C., Fraser H. L. By Materials Science and Engineering A 372 - (2004)
Conferences
• Effect of addition of -phase stabilizing elements on the microstructure and mechanical properties of Ti64 via laser-based processing route Mohanty I., Mishra G. , Saha P. , Kar S. K. By IIM ATM 2022 - (2022)
• Effect of Al and Nb variations on post solidification and heat treatment microstructure characteristics Banerjee T., Banumathy S. , Gupta D. K., Shekhar S. , Bhattacharjee A. , Kar S. K. By IIM ATM 2022 - (2022)
• Quantitative analysis of Boron enrichment into M23C6 precipitates during tempering and creep in modified 9Cr-1Mo steel by atom probe tomography S S., Pradeep K. G., Das C. R., Kar S. K. By IIM ATM 2022 - (2022)
• Investigation on the formation of reverted austenite and precipitation of Ni3Ti during ageing of MDN 465 PH martensitic stainless steel Poojari G., Tharian T. K., Singh S. B., Kar S. K. By IIM ATM 2022 - (2022)
• Correlative microscopy of precipitate evolution during ageing, its coarsening kinetics, solute partitioning behavior, and lattice misfit in Haynes 282 Mukherjee S., Sarkar S. K., Ahlawat S. , Biswas A. , Tarafder S. , Kar S. K. By 12th Asia Pacific Microscopy Conference - (2020)
• Effect of Al and Nb variation on compressive behaviour of -TiAl Banerjee T., Rao M. B., Sen M. , Bhattacharjee A. , Kar S. K. By EUROMAT 2019 - (2019)
• Phase stability study in TiAl based intermetallic system Banerjee T., Banumathy S. , Neelam N. , Bhattacharjee A. , Kar S. K. By NMD-ATM 2019 - (2019)
• Effect of long term ageing on HTLCF behaviour and deformation mechanisms of Ni based superalloy Mukherjee S., Sivaprasad S. , Tarafder S. , Kar S. K. By NMD ATM 2018 - (2018)
• Effect of Temperature and Deformation Speed on Formability of IN718 Sheets: Experimentation and Modelling Prasad K.S., Panda S.K., Kar S.K., Singh S.K., Murty S.V.S.N., Sharma S.C. By IOP Conference Series: Materials Science and Engineering 418 - (2018)
• Effect of Temperature and Deformation Speed on Formability of IN718 Sheets: Experimentation and Modelling Prasad K. S., Panda S. K., Kar S. K., Murty S. , Sharma S. C. By IDDRG-2018 - (2018)
• Phenomenological models to predict flow stress behavior of IN718 sheets at various elevated temperatures and strain Prasad K., Panda S. K., Kar S. K., Murty S. , Sharma S. C. By ADMAT-2017 - (2017)
• Effect of solution treatment on the formability and part performance of IN718 sheet material Prasad S., Panda S. K., Kar S. K., Murty S. , Sharma S. C. By AMPT-2017 - (2017)
• Effect of Bending Strain in Forming Limit Strain and Stress of IN-718 Sheet Metal Prasad S., Panda S. K., Kar S. K., Murty S. , Sharma S. C. By ICAMPS-2015 - (2015)
• Finite Element Validation of Forming Limit Diagram of IN-718 Sheet Metal Prasad S., Kamal T. , Panda S. K., Kar S. K., Murty S. , Sharma S. C. By ICMPC-2015 - (2015)
Book Chapter/Section
• Solidification Microstructure Evolution Modeling in Nb-Si Based Intermetallics-Strengthened-Metal-Matrix Composites Kar S. K., Bewlay B. P., Yang Y. By Symposium U Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications - MRS Proceedings, 1128 - (2008)
• Influence of Crystallographic Variant Selection on Microstructural Evolution in Titanium Alloys Kar S. K., Banerjee R. , Lee E. , Fraser H. L. By Proceedings of an International Conference on Solid - Solid Phase Transformations in Inorganic Materials 2005, Diffusional Transformations 133-138 (2005)
Book
• Modeling of mechanical properties in alpha/ beta Titanium alloys Kar S. K. By - (2005)

Principal Investigator

• Artificial Neural Network Modeling of Materials
• STUDY OF CORRELATION BETWEEN PROCESSING-MICROSTRUCTURE-MICROTEXTURE & PROPERTY IN A BETA TITANIUM ALLOY TI-5553
• Study of coorelation between processing, microstructure, microtexture and property in a high strength deep hardenable Beta Titanium Alloy, Ti-5AL-5Mo-5v-3Cr-0.6Fe (Ti-5553) for aircraft-structural applications.
• Experimental evaluation of froming limit diagram and forming behavior of differently heat treated Inconel-718 material
• Indigenous Development of Ultra High Strength Steel with Stainless Property for Space Application ( Project No.: 6456)
• Development of Multi-stage Deep Drawing Set-up and Estimation of Formability of Cu-(0.5-0.8%) Cr-0.05% Ti-0.05%Zr Alloy Sheets for Space Applications

Co-Principal Investigator

• FIST Program - 2012 [129]
• Impacting Research Innovation and Technology (IMPRINT) Round-I Operational Project for IMPRINT I Cell at IIT Kharagpur
• IMPRINT Cell at Indian Institute of Technology Kharagpur
• Setting Up High-End Testing Facilities of Materials for Biomaterials, Aerospace and Automotive Applications (SGDRI-2015)
• Ultrasound Phase Spectroscopy based Study of Deformation and Damage Mechanism in Porous Copper under Monotonic and Fatigue Loading Conditions