Indian Institute of Technology Kharagpur |

Journal

Quenching and Partitioning (Q&P) steel: Alloy design, phase transformation and evolution of microstructure Kumar S., Singh S. B. By Metallurgical and Materials Transactions A In press - (Accepted/In-Press)
Diffusion-controlled growth mechanism of phases and the microstructural evolution in the Ni-Zn system Bansal U., Thakur A. K., Baheti V. A., Singh S. B., Mandal A. , Halder A. K., Chakraborty A. , Chattopadhyay K. , Paul A. By Materials Characterization 202 112982-112988 (2023)
Atomic-scale investigation of H-trapping by fine NbC precipitates in a low C ferritic steel Samanta S., Gangavarapu S. , Jayabalan B. , Makineni S. K., Dutta M. , Singh S. B. By Scripta Materialia 234 115537-115542 (2023)
Effects of Temperatures of Rolling and Annealing on Microstructures and Tensile Properties of Low Carbon Ferritic Low Density Steels Singh V. K., Rana R. , Singh S. B., Kundu A. By ISIJ International 63 930-940 (2023)
Post-hot-deformation microstructure development in austenite stainless steel Pal S. K., Singh S. B., Rout M. By Materials Chemistry and Physics 295 127064-127073 (2023)
Deformation-induced martensite transformation and variant selection in AISI 316L austenitic stainless steel during uniaxial tensile deformation Hasan S.M., Ghosh A., Chakrabarti D., Singh S.B. By Materials Science and Engineering A 872 144930-144942 (2023)
Microstructure-property relationship in the quenching and partitioning (Q&P) steel Kumar S., Singh S.B. By Materials Characterization 196 112561-112577 (2023)
Yield point phenomenon in low-alloyed TRIP-aided steel role of retained austenite Ranjan R., Beladi H. , Hodgson P. D., Singh S. B. By Material Science and Technology 39 85-93 (2023)
Influence of local microstructure on the dislocation transference and micro-mechanical response in metastable fcc alloy Mandal A., Modak P., Sen M., Singh S.B., Chakrabarti D. By Journal of Materials Science 57 1390-1402 (2022)
Effect of Welding Speed on Fatigue Property of Laser Welded Dual-Phase Steel Mitra S., Arora K.S., Bhattacharya B., Singh S.B. By Transactions of the Indian Institute of Metals 75 525-534 (2022)
Electroless Amorphous NiP Coatings Over API X70 Steel: Resistance to Wear and Hydrogen Embrittlement Samanta S., Vishwanath K., Mondal K., Dutta M., Singh S.B. By Metals and Materials International 28 397-411 (2022)
Isothermal austenite to ferrite transformation: analysis of dilatation data Ranjan R., Singh S.B. By Philosophical Magazine 102 1042-1054 (2022)
An alternative quenching and partitioning (Q&P) process via spheroidization Kumar S., Samanta S., Singh S.B. By Materials Characterization 191 112049-112064 (2022)
Isothermal bainite transformation in low-alloy steels: Mechanism of transformation Ranjan R., Singh S.B. By Acta Materialia 202 302-316 (2021)
Tribological behaviour of the hardfacing alloys utilised to fabricate the wear parts of an excavator bucket Das B., Sawrav K., Singh S.B., Bandyopadhyay P.P. By Transactions of the Institute of Metal Finishing 99 153-161 (2021)
Evolution of microstructure during the "quenching and partitioning (Q&P)" treatment Kumar S., Singh S.B. By Materialia 18 - (2021)
Effect of cooling-rate during solidification on the structure-property relationship of hot deformed low-carbon steel Sarkar J., Modak P. , Singh S. B., Chakrabarti D. By Materials Chemistry and Physics 257 123826- (2021)
Texture development in 304LN austenitic stainless steel during post-hot-axisymmetric compression Rout M., Singh S.B., Pal S.K. By Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235 1131-1143 (2021)
The Mechanical Properties of Low Alloy TRIP-Aided Steel: The Role of Retained Austenite Ranjan R., Beladi H., Hodgson P.D., Singh S.B. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 52 4649-4663 (2021)
Electroless NiP coatings over API X70 steel: Effect of composition on the H-permeation and corrosion resistance Samanta S., Mondal K., Dutta M., Singh S.B. By Surface and Coatings Technology 409 - (2021)
Thermomechanical Treatment of Carbide-Free Bainitic Steel Hasan S.M., Chakrabarti D., Singh S.B. By Metal Science and Heat Treatment 63 354-362 (2021)
Development of amorphous Ni-P coating over API X70 steel for hydrogen barrier application Samanta S., Singh C., Banerjee A., Mondal K., Dutta M., Singh S.B. By Surface and Coatings Technology 403 - (2020)
Enhancement of joint strength in friction stir lap welding between AA6061 and AISI 304 by adding diffusive coating agents Mypati O., Sadhu A., Sahu S., Mishra D., Pal S.K., Singh S.B., Srirangam P. By Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234 204-217 (2020)
Orientation Dependence of Deformation-Induced Martensite Transformation During Uniaxial Tensile Deformation of Carbide-Free Bainitic Steel Hasan S. M., Ghosh A. , Chakrabarti D. , Singh S. B. By Metallurgical and Materials Transactions A 51A 2053-2063 (2020)
A Descriptive Model on the Grain Size Dependence of Deformation and Martensitic Transformation in Austenitic Stainless Steel A., S. , M. , S. , Singh S. B., Chakrabarti D. By Metallurgical and Materials Transactions A 51 3886-3905 (2020)
Development of continuously cooled low-carbon, low-alloy, high strength carbide-free bainitic rail steels Hasan S. M., Ghosh M. , Chakrabarti D. , Singh S. B. By Materials Science and Engineering: A 771 138590-138601 (2020)
An alternative and comprehensive approach to estimate trapped hydrogen in steels using electrochemical permeation tests Samanta S., Kumari P., Mondal K., Dutta M., Singh S.B. By International Journal of Hydrogen Energy 45 26666-26687 (2020)
Understanding the effect of prior bainite/martensite on the formation of carbide-free bainite Hasan S. M., Kumar S. , Chakrabarti D. , Singh S. B. By Philosophical Magazine 100 797-821 (2020)
Bending induced anisotropy in properties: A mechanistic study Mandal A., Syed B., Bhandari K.K., Bhattacharya B., Deb A., Singh S.B., Chakrabarti D. By Materials Science and Engineering A 788 - (2020)
Bending induced anisotropy in properties: A mechanistic study A., B. , K. , B. , Deb A. , Singh S. B., Chakrabarti D. By Materials Science and Engineering A 788 139521- (2020)
Effect of prior austenite grain size on the formation of carbide-free bainite in low-alloy steel Hasan S. M., Kumar S. , Chakrabarti D. , Singh S. B. By Philosophical Magazine 100 2320-2334 (2020)
Effect of welding speed on texture in laser welded dual phase steel Mitra S., Arora K. S., Bhattacharya . , Singh S. B. By Metallurgical and Materials Transactions A 51A 2915-2926 (2020)
Effect of Welding Speed on the Prediction Accuracy of Residual Stress in Laser Welded 1.2 mm Thick Dual Phase Steel Mitra S., Arora K. S., Bhattacharya B. , Singh S. B. By Lasers in Manufacturing and Materials Processing 7 74-87 (2020)
Low Transverse Ductility in a New High-Strength Corrosion-Resistant Steel: Microstructure andÂ Texture Poojari G., Kar S.K., Singh S.B., Kadavil T.T., Anoop C.R. By Transactions of the Indian Institute of Metals 72 1453-1457 (2019)
Low Transverse Ductility in a New High-Strength Corrosion-Resistant Steel: Microstructure and Texture Poojari G., Kar S. K., Singh S. B., Tharian T. K., Anoop C. R. By Transactions of the Indian Institute of Metals 72 1453-1457 (2019)
Formation of austenite in steels during heating: analysis of dilatation data Ranjan R., Singh S. B. By MATERIALS SCIENCE AND TECHNOLOGY 35 782-790 (2019)
Work hardening behaviour and damage mechanisms in carbide-free bainitic steel during uni-axial tensile deformation Hasan S. M., Mandal A. , Singh S. B., Chakrabarti D. By Materials Science and Engineering A 751 142-153 (2019)
Cold-bending of linepipe steel plate to pipe, detrimental or beneficial? Mandal A., Badirujjaman S. , Bhandari K. , Bhattacharya B. , Deb A. , Singh S. B., Chakrabarti D. By Materials Science and Engineering A 746 58-72 (2019)
Microstructure and texture evolution in austenitic stainless steel during low strain rate deformation at elevated temperature Rout M. P., Singh S. B., Pal S. K. By International Journal of Material Forming 13 605-621 (2019)
Enhancement of joint strength in friction stir welding AA6061 to AISI 304 by adding diffusive coating agents Mypati O., Sadhu A. , Sahu S. , Mishra D. , Pal S. K., Singh S. B., Srirangam P. By The Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234 204-217 (2019)
Investigation on effect of pin shapes on temperature, material flow and forces during friction stir welding: A simulation study Jain R., Pal S. K., Singh S. B. By Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 1-14 (2018)
Dry rolling/sliding wear behaviour of pearlitic rail and newly developed carbide-free bainitic rail steels Hasan S. M., Chakrabarti D. , Singh S. B. By Wear 408-409 151-159 (2018)
EBSD study of microstructure evolution during axisymmetric hot compression of 304LN stainless steel Rout M., Ranjan R. , Pal S. K., Singh S. B. By Materials Science and Engineering A 711 378-388 (2018)
EBSD study of microstructure evolution during axisymmetric hot compression of 304LN stainless steel Rout M., Ranjan R. , Pal S. K., Singh S. B. By Materials Science & Engineering A 711 378-388 (2018)
Novel Bilayer Zn-Ni/Ni-Co-SiC Nanocomposite Coating with Exceptional Corrosion and Wear Properties by Pulse Electrodeposition Das S., Banthia S. , Patra A. , Sengupta S. , Singh S. B. By Journal of Alloys and Compounds 738 394-404 (2018)
Bainite transformation during continuous cooling: analysis of dilatation data Ranjan R., Singh S. B. By Metallurgical and Materials Transaction A 49A 88-93 (2018)
Deformation Behavior and Evolution of Microstructure and Texture During Hot Compression of AISI 304LN Stainless Steel Rout M., Biswas S. , Ranjan R. , Pal S. K., Singh S. B. By Metallurgical and Materials Transactions A 49 864-880 (2018)
Martensite transformation during continuous cooling: analysis of dilatation data Ranjan R., Singh S. B. By Metallurgical and Materials Transaction A 49A 4474-4483 (2018)
Investigation of Austenitization in Low Carbon Microalloyed Steel During Continuous Heating Gunabalapandian K., Samanta S. , Ranjan R. , Singh S. B. By METALLURGICAL AND MATERIALS TRANSACTIONS A 48 2099-2104 (2017)
Effect of rolling and subsequent annealing on microstructure, microtexture and properties of an experimental duplex stainless steel Mandal A., Patra S. , Chakrabarti D. , Singh S. B. By Metallurgical and Materials Transaction A 48 5960-5977 (2017)
Nucleation and growth behaviour of iron-zinc intermetallic phases in prior-copper coated galvanized steels Mondal A., Chakraborty A. , Bysakh S. , Dutta M. , Singh S. B. By Journal of Alloys and Compounds 699 947-958 (2017)
Microstructural development of prior nickel coated hot dipped galvanised coatings Chakraborty A., Govardhana P. , Mondal, A. , Laha T. , Dutta M. , Singh S. B. By Journal of Alloys and Compounds 699 648-656 (2017)
Analysis of the kinetics of bainite formation below the MS temperature Samanta S., Biswas P. , Singh S. B. By Scripta Materialia, 136 132-135 (2017)
Finite element analysis of cross rolling on AISI 304 stainless steel: prediction of stress and strain fields Rout M., Pal S. K., Singh S. B. By Journal of the Institution of Engineers (India): Series C 98 27-35 (2017)
Finite element simulation of temperature and strain distribution during friction stir welding of AA2024 aluminum alloy Jain R., Pal S. K., Singh S. B. By Journal of the Institution of Engineers (India): Series C 98 - (2017)
Finite Element Simulation of Temperature and Strain Distribution during Friction Stir Welding of AA2024 Aluminum Alloy Jain R., Pal S. K., Singh S. B. By Journal of The Institution of Engineers (India): Series C 98 37-43 (2017)
A study on the variation of forces and temperature in a friction stir welding process: a finite element approach Jain R., Pal S. K., Singh S. B. By Journal of Manufacturing Processes 23 278-286 (2016)
Finite Element Simulation of a Cross Rolling Process Rout M., Pal S. K., Singh S. B. By Journal of Manufacturing Processes 24 283-292 (2016)
Formation of bainite below the MS temperature: Kinetics and crystallography Samanta S., Biswas P. , Giri S. , Singh S. B., Kundu S. By Acta Materialia 105 390-403 (2016)
Suppression of selective surface oxidation in DP steels by effective shielding of copper - Kinetic simulation and experimental validation Chakraborty A., Mondal A. , Dutta M. , Singh S. B. By Surface and Coating Technology 306 473-479 (2016)
Microstructural investigation of galvanized coatings with prior flashcoating of copper on DP steels Chakraborty A., Mondal A. , Bysakh S. , Dutta M. , Singh S. B. By Surface & Coatings Technology 285 220-226 (2016)
Stress-Assisted Bainite Transformation and Bainitic Steels Kashyap I., Ranjan R. , Singh S. B. By IRON AND STEEL REVIEW 59 55-58 (2015)
Thermo-mechanical processing of TRIP aided steels Ranjan R., Beladi H. , Singh S. B., Hodgson P. By Metallurgical and Materials Transactions A 46A 3232-3247 (2015)
Influence of boron addition to Ti 13Zr 13Nb alloy on MG63 osteoblast cell viability and protein adsorption Majumdar P., Singh S. B., Dhara S. , Chakraborty M. By Materials Science and Engineering C 46 62-68 (2015)
SERS activeAgencapsulatedFe@SiO2 nanorodsinelectromagnetic waveabsorptionandcrystalvioletdetection Senapati S., Srivastava S. K., Singh S. B., Kulkarni A. R. By EnvironmentalResearch 135 95-104 (2014)
Dilatometric and microstructural response of variant selection during a9 transformation Mangal A., Biswas P. , Lenka S. , Singh V. , Singh S. B., Kundu S. By Materials Science and Technology 30 1116-1124 (2014)
A phenomenological model for bake hardening in minimal carbon steels Das S., Mohanty O. N., Singh S. B. By Philosophical Magazine 94 2046-2061 (2014)
Ultra Fast Cooling and Its Effect on the Mechanical Properties of Steel Mohapatra S. S., Ravikumar S. V., Ranjan R. , Pal S. K., Singh S. B., Chakraborty S. By Journal of Heat Transfer 136 0321011-0321019 (2014)
Fatigue crack growth behaviour of ferrite bainite dual phase steels Kumar A., Singh S. B., Ray K. K. By Materials Science and Technology 29 1507-1512 (2013)
Microstructural prediction through artificial neural network (ANN) for development of transformation induced plasticity (TRIP) aided steel Bhattacharyya T., Singh S. B., Sikdar S. , Bhattacharyya S. , Bleck W. , Bhattacharjee D. By Materials Science & Engineering A 565A 148-157 (2013)
Structure-Property Correlation in TRIP Aided Steels Singh S. B., Bhattacharyya T. , Ranjan R. , Bhattacharyya S. , Bhattacharjee D. By International Journal of Metallurgical Engineering 2 161-178 (2013)
Development of Multiphase Microstructure with Bainite, Martensite, and Retained Austenite in a Co-Containing Steel Through Quenching and Partitioning (Q&P) Treatment Samanta S., Das S. , Chakrabarti D. , Samajdar I. , Singh S. B., Haldar A. By Metallurgical and Materials Transactions A 44A 5653-5664 (2013)
Hot shortness behavior of a copper-alloyed high strength interstitial free steel Rana R., Bleck W. , Singh S. B., Mohanty O. N. By Materials Science & Engineering A 588A 288-298 (2013)
An assessment on coatability of transformation induced plasticity (TRIP)-aided steel Bhattacharyya T., Singh S. B., Bhattacharyya S. , Ray R. K., Bleck W. , Bhattacharjee D. By Surface & Coatings Technology 235 226-234 (2013)
Effect of Pre-Treatment on Copper Precipitation Characteristics in a Copper-Alloyed Interstitial Free Steel Studied by Thermoelectric Power Measurement Rana R., Massardier V. , Singh S. B., Mohanty O. N. By METALLURGICAL AND MATERIALS TRANSACTIONS A 44A 186-200 (2013)
Effect of recalescence on microstructure and phase transformation in high carbon steel Lenka S., Kundu S. , Singh S. B., Chandra S. By Materials Science and Technology 29 715-725 (2013)
Influence of in situ TiB Reinforcements and Role of Heat Treatment on Mechanical Properties and Biocompatibility of beta Ti-alloy Majumdar P., Singh S. B., Dhara S. , Chakraborty M. By Journal of the Mechanical Behavior of Biomedical Materials 10 1-12 (2012)
Effect of bainitic transformation on bake hardening in TRIP assisted steel Das S., Timokhina I. , Singh S. B., Pereloma E. , Mohanty O. N. By Materials Science and Engineering A 534A 485-494 (2012)
Magnetic Ni/Ag Core-Shell Nanostructure from Prickly Ni Nanowire Precursor and Its Catalytic and Antibacterial Activity Senapati S., Srivastava S. K., Singh S. B., Mishra H. N. By Journal of Materials Chemistry 22 6899-6906 (2012)
Synthesis, Characterization and Photocatalytic Activity of Magnetically Separable Hexagonal Ni/ZnO Nanostructure Senapati S., Srivastava S. K., Singh S. B. By Nanoscale 4 6604-6612 (2012)
Synthesis, Magnetic Properties and Catalytic Activity of Hierarchical Cobalt Microflowers Senapati S., Srivastava S. K., Singh S. B. By Journal of Nanoscience and Nanotechnology 12 1-11 (2012)
Optimization of Stability of Retained Austenite in TRIP-Aided Steel Using Data-Driven Models and Multi-Objective Genetic Algorithms Ghosh A., Singh S. B., Chakraborti N. By Materials Performance and Characterization 1 1-11 (2012)

Conferences

Microstructure and Texture Study of High Temperature Upset Forged 304LN Stainless Steel Rout M., Singh S.B., Ranjan R., Pal S.K. By Lecture Notes in Mechanical Engineering 113-122 (2022)
Investigation of the Selective Oxidation Process for High Strength Steels Sadhu S., Chakraborty A., Singh S.B., Halder A.K. By Lecture Notes in Mechanical Engineering 77-90 (2022)
Investigation on the formation of reverted austenite and precipitation of Ni3Ti during ageing of MDN 465 PH martensitic stainless steel Poojari G., Tharian T. K., Singh S. B., Kar S. K. By IIM ATM 2022 - (2022)
Modification of low modulus titanium alloys by addition of interstitial solute for biomedical load bearing applications Majumdar P., Singh S.B., Dhara S., Chakraborty M. By MS and T 2019 - Materials Science and Technology 2019 283-290 (2019)
Phase transformations in high strength steels Ranjan R., Singh S. B. By International Conference on Tailoring grain orientation: processing and applications - (2019)
Friction stir welding for joining of dissimilar materials Sahu S., Mypati O. , Nayak S. S., Sarkar P. , Pal S. K., Singh S. B. By 7th International and 28th All India Manufacturing Technology, Design and Research Conference - (2018)
Characterization of post-hot-deformation annealing twins developed in 304LN austenitic stainless steel Rout M., Singh S. B., Pal S. K. By 7th Asia Steel International Conference 112- (2018)
Phase transformations in high strength steels Ranjan R., Singh S. B. By 7th Asia Steel International Conference 2018 - (2018)
Evolution of Microstructure in some Advanced High Strength Steels Singh S. B. By NATIONAL CONFERENCE ON SCIENCE AND TECHNOLOGY OF SPECIAL STEELS & NANOMATERIALS - (2018)
Evolution of Microstructure in some High Strength Steels Singh S. B. By National Conference on Physical Simulation of Thermal-Mechanical Processing of Materials (NC-PSTMPM) - (2017)
Evolution of microstructure in hot rolled TRIP-aided steels Singh S. B. By THERMEC - (2013)
The dilatometric and microstructural response of variant selection during a¢ transformation Mangal A., Biswas P. , Singh S. B., Kundu S. By Adventires in Physical Metallurgy of Steels - (2013)

Book Chapter/Section

Microalloyed Steel Das S., Karmakar A. , Singh S. B. By High performance ferrous alloys 83-112 (2021)
Reference Module in Materials Science & Materials Engineering Biswas S., Samanta S. , Singh A. K., Singh S. B. By An Overview on the Texture Evolution of Cold Rolled IF Steels and Zn Coating During Galvanizing and Galvannealing - (2019)
Thermo-mechanical simulation of friction stir welding process using Lagrangian method Jain R., Pal S. K., Singh S. B. By Simulations for design and manufacturing 103-146 (2018)
Finite element modeling of hot rolling: Steady- and unsteady-state analyses Rout M., Pal S. K., Singh S. B. By Computational Methods and Production Engineering 83-124 (2017)
Finite element modeling of hot rolling: Steady- and unsteady-state analyses Rout M. P., Pal S. K., Singh S. B. By Computational Methods and Production Engineering 83-124 (2017)
Numerical modeling methodologies for friction stir welding process Jain R., Pal S. K., Singh S. B. By Computational Methods and Production Engineering 125-168 (2017)
Numerical modeling methodologies for friction stir welding process Jain R., Pal S. K., Singh S. B. By Computational Methods and Production Engineering 125-168 (2017)
Bake hardening behavior: Low and ultra low carbon steels Das S., Singh S. B., Mohanty O. N. By Encyclopedia of Iron, Steel, and Their Alloys 306-319 (2015)
Mechanisms of Bainite Transformation in Steels Singh S. B. By Phase Transformations in Steels 385-416 (2012)

Workshop

Microstructure property correlation in wear resistant steel Singh S. B. By Wear Resistant Steels for L&E Segments: Current and Future Aspects - (2021)

Patent

Ni-based amorphous coating on API X70 grade steel for the prevention of atmospheric corrosion and hydrogen embrittlement: the effect of coating composition (hyper-eutectic) Samanta S., Singh C. , Dutta M. , Vishwanath K. , Mondal K. , Singh S. B. By - (2020)
Ni-based amorphous coating on API X70 grade steel for the prevention of atmospheric corrosion and hydrogen embrittlement: the effect of coating composition (hypo-eutectic) Samanta S., Singh C. , Dutta M. , Vishwanath K. , Mondal K. , Singh S. B. By - (2020)
A development of Ni-based amorphous coating on API X70 grade steel for the prevention of atmospheric corrosion and hydrogen embrittlement Samanta S., Singh C. , Manna M. , Vishwanath K. T., Banerjee A. , Bhagat A. N., Dutta M. , Mondal K. , Singh S. B. By - (2020)
Low carbon microalloyed non-heat treated steel forgings and method of preparation thereof (applied) Kumar S., Singh S. B. By - (2018)
Ultra-High Strength and Wear Resistant Carbide-free Bainitic Rail Steel and Method of Manufacturing the Same (applied) Hasan S. M., Singh S. B. By - (2018)

Edited Volume

Automotive Steels Design, Metallurgy, Processing and Applications Rana R., Singh S. B. By Automotive Steels Design, Metallurgy, Processing and Applications 1-469 (2017)

Metallurgical and Materials Engineering

Faculty

Responsibilities

Research Areas

Principal Investigator

Co-Principal Investigator

Ph. D. Students

Aman Jyoti Shukla

B Mohan Rao

Golla Veerappagari Suresh

Juhi Srivastava

Jyotiranjan Pany

K Poorna Chander

Kamal Kumar Gupta

Kumar Karuna Nidhi

Poojari Govardhana

Rajani Jaiswal

Sarbari Ganguly

Sarojini Sahu

Sen Amitava Dhrubadas

Vinit Kumar Singh