Indian Institute of Technology Kharagpur |

Book Chapter/Section

Microstructural and mechanical properties of aluminium metal matrix composites developed by additive manufacturing-a review Shukla A.K., Majumdar J.D. By Additive Manufacturing: Advanced Materials and Design Techniques 43-56 (2023)
Laser-Assisted Additive Manufacturing of Ni-Based Superalloy Components Kumar M., Majumdar J.D., Fecht H.-J., Manna I. By Minerals, Metals and Materials Series 499-521 (2022)
Laser Surface Processing for Tailoring of Properties by Optimization of Microstructure Majumdar J. D., Weisheit A. , Manna I. By Advanced Manufacturing Techniques Using Laser Material Processing 121-171 (2016)
Development of Functionally Graded Coating by Thermal Spray Deposition Majumdar J. D., Manna I. By Thermal Sprayed Coatings and their Tribological Performances 121-162 (2015)
Laser Surface Engineering Majumdar J. D., Manna I. By Handbook of Manufacturing Engineering and Technology 2639-2676 (2015)
Laser surface engineering of titanium and its alloys for improved wear, corrosion and high-temperature oxidation resistance Majumdar J. D., Manna I. By Laser Surface Engineering Processes and Applications 483-521 (2015)
Thermal and Cold Spraying Technology in Manufacturing Majumdar J. D. By Handbook of Manufacturing Engineering and Technology 2805-2850 (2015)
Introduction to laser assisted fabrication of materials Majumdar J. D., Manna I. By Laser-Assisted Fabrication of Materials 1-67 (2013)
Laser treatment to improve the corrosion resistance of magnesium (Mg) alloys Majumdar J. D., Manna I. By Corrosion Prevention of Magnesium Alloys 133-162 (2013)
Corrosion Protection by Laser Surface Modification Majumdar J. D., Manna I. By Corrosion Reviews 417-461 (2010)
Laser Assisted Surface Modification of Engineering Metals and Alloys Majumdar J. D., Manna I. By Surface Engineering 147-187 (2010)

Journal

Effect of Beam Oscillation on Microstructure and Tensile Property of Electron Beam-Welded Commercially Pure (CP) Titanium Singh J.K., Roy G.G., Majumdar J.D. By Transactions of the Indian Institute of Metals 76 465-472 (2023)
Surface degradation behavior of aluminium cenosphere composite foam developed by powder metallurgy route Shukla A.K., Mondal D.P., Madapana D., Dutta Majumdar J. By Materials Chemistry and Physics 295 - (2023)
Enhancing the static and dynamic mechanical properties of laser powder bed fusion process built 15 5 precipitation hardening stainless steel specimens by laser shock peening Ramadas H., Sarkar S., Ganesh P., Kaul R., Majumdar J.D., Nath A.K. By Materials Science and Engineering A 866 - (2023)
Tribocorrosion Behaviour of Laser-Induced Periodic Surface Structured Ti6Al4V Madapana D., Bathe R., Manna I., Dutta Majumdar J. By Journal of Bio- and Tribo-Corrosion 9 - (2023)
Melting efficiency calculation of finite-element-modeled weld-bead and experimental weld-bead for laser-irradiated Hastelloy C-276 sheet Bal K.S., Dutta Majumdar J., Roy Choudhury A. By Welding in the World - (2023)
Influence of tool rotational speed on the evolution of microstructure and mechanical properties of precipitation-hardened Aluminium 6061 butt joint during friction stir welding Ghosh B., Das H., Samanta A., Majumdar J.D., Ghosh M. By Engineering Research Express 4 - (2022)
Modelling of Porous Titanium and Understanding Its Mechanical Behavior Using Micro-Computed Tomography Bhattacharyya R., Rana M., Gupta A., Dutta Majumdar D., Dutta Majumdar J., Roy Chowdhury A. By Journal of Materials Engineering and Performance - (2022)
Fatigue crack growth rate and fracture toughness evaluation of 15-5 precipitation hardening stainless steel fabricated by laser powder bed fusion process Ramadas H., Nath A.K., Sarkar S., Ganesh P., Kaul R., Majumdar J.D. By Materials Science and Engineering A 861 - (2022)
Effect of beam oscillation on microstructure, defect density, and resistivity of electron beam welded niobium Singh J.K., Roy G.G., Prakash P.N., Rai A., Manna I., Kanjilal D., Dutta Majumdar J. By Welding in the World 66 2483-2495 (2022)
Structure-property-process parameters correlation of laser additive manufactured TiC dispersed titanium aluminide (Ti45Al5Nb0. 5Si) composite Weisheit A., Dutta A. , Rittinghaus S. K., Dutta Majumdar J. By Intermetallics 134 - (2021)
Ultrafast Laser-Induced Periodic Structuring of Titanium Alloy (Ti-6Al-4V) Dileep M., Bathe R., Manna I., Padmanabham G., Dutta Majumdar J. By Journal of Materials Engineering and Performance 30 4000-4011 (2021)
Structure-property-process parameters correlation of laser additive manufactured TiC dispersed titanium aluminide (Ti45Al5Nb0.5Si) composite Weisheit A., Dutta A., Rittinghaus S.K., Majumdar J.D. By Intermetallics 134 - (2021)
Studies on Electron Beam Surface Remelted Inconel 718 Superalloy Sharma S.K., Biswas K., Dutta Majumdar J. By Metals and Materials International 27 5360-5373 (2021)
Effect of beam current on the microstructure, crystallographic texture and mechanical properties of electron beam welded high purity niobium Das K., Ghosh A., Bhattacharya A., Lanjewar H., Majumdar J.D., Ghosh M. By Materials Characterization 179 - (2021)
Wear and corrosion behavior of nano carbide dispersed AISI304 stainless steel by laser surface processing Chakraborty A., Dileep M., Krishna S., Pityana S., Sen D., Manna I., Majumdar J.D. By Surface Topography: Metrology and Properties 9 - (2021)
Wear and Corrosion Protection of Interstitial Free Steel by Sputter Deposition of Alloy Coating as a Novel Alternative to Galvanizing Debnath M. K., Anishetty S. , Majumdar J. D., Manna I. By Journal of Materials Engineering and Performance 1-10 (2021)
Wear behavior of laser surface melted inconel 718 Sharma S.K., Biswas K., Nath A.K., Manna I., Dutta Majumdar J. By Lasers in Engineering 50 1-13 (2021)
Metallurgical Characteristics, Compressive Strength, and Chemical Degradation Behavior of Aluminum-Cenosphere Composite Foam Developed by Spray Forming Route Shukla A.K., Mondal D.P., Dutta Majumdar J. By Journal of Materials Engineering and Performance 30 5750-5762 (2021)
Microstructural, elemental, mechanical and structural attributes of aa1100/17-4 ph stainless steel composites fabricated via friction stir processing Marazani T., Akinlabi E.T., Madyira D.M., Majumdar J.D., Pal S.K. By Engineering Solid Mechanics 9 391-414 (2021)
Microstructural, elemental, mechanical and structural attributes of AA1100/17-4 PH stainless steel composites fabricated via friction stir processing Marazani T., Akinlabi E. , Madyira D. , Majumdar J. D., Pal S. K. By Engineering Solid Mechanics 9 391-414 (2021)
Radio Frequency Magnetron Sputtering Coatings of Biomedical Implants Using Nanostructured Titanium Carbide Thin films Baruwa A.D., Abegunde O.O., Akinlabi E.T., Oladijo O.P., Makhatha E.M., Ikumapayi O.M., Krishna S., Majumdar J.D. By Journal of Bio- and Tribo-Corrosion 7 - (2021)
Electron Beam Surface Treatment of 316L Austenitic Stainless Steel: Improvements in Hardness, Wear, and Corrosion Resistance Basak S., Sharma S.K., Mondal M., Sahu K.K., Gollapudi S., Dutta Majumdar J., Hong S.-T. By Metals and Materials International 27 953-961 (2021)
Electron Beam Surface Treatment of 316L Austenitic Stainless Steel: Improvements in Hardness, Wear, and Corrosion Resistancee Basak S., Sharma S. K., Mondal M. , Sahu . , Gollapudi S. , Majumdar J. D., Hong S. By https://doi.org/10.1007/s12540-020-00773-y 1-9 (2020)
Development of graded composition and microstructure on Inconel 718 by laser surface alloying with Si, Al and ZrB2 for improvement in high temperature oxidation resistance Manna I., Majumdar J. D. By Surface and Coating Technology 402 1-11 (2020)
Development of graded composition and microstructure on Inconel 718 by laser surface alloying with Si, Al and ZrB2 for improvement in high temperature oxidation resistance Kumar M., Das M. , Majumdar J. D., Manna I. By Surface and Coating Technology 402 1-11 (2020)
Development of graded composition and microstructure on Inconel 718 by laser surface alloying with Si, Al and ZrB2 for improvement in high temperature oxidation resistance Kumar M., Das M., Majumdar J.D., Manna I. By Surface and Coatings Technology 402 - (2020)
Development of graded composition and microstructure on Inconel 718 by laser surface alloying with Si, Al and ZrB2 for improvement in high temperature oxidation resistance Kumar M., Das M. , Majumdar J. D. By Surface and Coating Technology 402 1-11 (2020)
High Temperature Oxidation Study of Nano-Y 2 O 3 Dispersed Ferritic Alloys Synthesized by Mechanical Alloying and Sintering Meharwal A., Kumar M. , Karak S. K., Dutta Majumdar J. , Manna I. By Metallurgical and Materials Transactions A 1-11 (2020)
High Temperature Oxidation Study of Nano-Y2O3 Dispersed Ferritic Alloys Synthesized by Mechanical Alloying and Sintering Meharwal A., Kumar M., Karak S.K., Majumdar J.D., Manna I. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 51 5257-5267 (2020)
Studies on the effect of composition and pre-heating on microstructure and mechanical properties of direct laser clad titanium aluminide Weisheit A., Rittinghaus S.-K., Dutta A., Majumdar J.D. By Optics and Lasers in Engineering 131 - (2020)
Studies on the effect of composition and pre-heating on microstructure and mechanical properties of direct laser clad titanium aluminide Weisheit A., Rittinghaus S. , Dutta A. , Dutta Majumdar J. By Optics and Lasers in Engineering 131 1-13 (2020)
Linear Reciprocating Wear of Yttria-Stabilized Zirconia-Based Composite Coatings Developed by Thermal Spray Nath S., Manna I. , Lawrence J. , Majumdar J. D. By Journal of Materials Engineering and Performance 1-16 (2020)
Effect of Heat Input on Mechanical and Electrochemical Properties of Electron-Beam-Welded Inconel 718 Sharma S. K., Biswas K. , Majumdar J. D. By Journal of Materials Engineering and Performance 29 1706-1714 (2020)
Effect of Heat Input on Mechanical and Electrochemical Properties of Electron-Beam-Welded Inconel 718 Sharma S. K., Biswas K. , Majumdar J. D. By Journal of Materials Engineering and Performance 29(3) 1-9 (2020)
Corrosion study and quantitative measurement of crystallite size of high strength aluminum hybrid composite developed via friction stir processing Ikumapayi O. M., Akinlabi E. T., Majumdar J. D., Fayomi O. S., Akinlabi S. A. By Materialwissenschaft und Werkstofftechnik 51 732-739 (2020)
Corrosion study and quantitative measurement of crystallite size of high strength aluminum hybrid composite developed via friction stir processing [Korrosionsuntersuchung und quantitative Messung der Kristallitgröße von rührreibgeschweißten, hochfesten Aluminiumhybrid-Verbundwerkstoffen] Ikumapayi O.M., Akinlabi E.T., Majumdar J.D., Fayomi O.S.I., Akinlabi S.A. By Materialwissenschaft und Werkstofftechnik 51 732-739 (2020)
Microstructural change during laser welding of Inconel 718 Sharma S. K., Biswas K. , Nath A. K., Manna I. , Majumdar J. D. By Optik 218 165029- (2020)
Microstructural Change during Laser Welding of Inconel 718 Sharma S. K., Biswas K. , Nath A. K., Manna I. , Majumdar J. D. By Optik 218 1-11 (2020)
Microstructural characterization of laser surface-melted Inconel 718 Sharma S.K., Biswas K., Nath A.K., Manna I., Majumdar J.D. By Journal of Optics (India) 49 494-509 (2020)
Effect of post-weld heat treatment on the tensile strength of laser beam welded Hastelloy C-276 sheets at different heat inputs Bal K. S., Dutta Majumdar J. , Roy Choudhury A. By Journal of Manufacturing Processes, Volume 37, January 2019, Pages 578-594 37 578-594 (2019)
Effect of Prior Cold Deformation and Nitriding Conditions on Microstructure and Mechanical Properties of Plasma Nitrided IF Steel Debnath M. K., Majumdar J. D., Mukherjee S. , Manna I. By Metallurgical and Materials Transactions A 50 4319-4330 (2019)
Effect of Prior Cold Deformation and Nitriding Conditions on Microstructure and Mechanical Properties of Plasma Nitrided IF Steel Debnath M.K., Majumdar J.D., Mukherjee S., Manna I. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 50 4319-4330 (2019)
Effect of Processing Technique on the Mechanical Properties of a Functionalized Superhydrophobic Silane Baruwa A. D., Akinlabi E. T., Oladijo O. P., Majumdar J. D., Krishna S. By ASME International Mechanical Engineering Congress and Exposition 1-11 (2019)
Surface Integrity of TiC Thin Film Produced by RF Magnetron Sputtering Sputtering Olayinka A. O., Akinlabi E. , Oluseyi O. P., Dutta Majumdar J. By Procedia Manufacturing 35 950-955 (2019)
Effect of varying low substrate temperature on sputtered aluminium films Mwema F.M., Akinlabi E.T., Oladijo O.P., Majumdar J.D. By Materials Research Express 6 - (2019)
Surface modification of structural material for nuclear applications by electron beam melting: enhancement of microstructural and corrosion properties of Inconel 617 Basak S., Sharma S. K., Sahu K. K., Gollapudi S. , Majumdar J. D. By SN Applied Sciences 1-12 (2019)
Characterization of high strength aluminium based surface matrix composite reinforced with low-cost PKSA fabricated by friction stir processing Ikumapay O. M., Akinlabi E. ., Majumdar J. D., Akinlabi S. A. By Materials Research Express 6 1-27 (2019)
Characterization of high strength aluminium-based surface matrix composite reinforced with low-cost PKSA fabricated by friction stir processing Ikumapayi O.M., Akinlabi E.T., Majumdar J.D., Akinlabi S.A. By Materials Research Express 6 - (2019)
Influence of carbonaceous agrowastes nanoparticles on physical and Mechanical properties of friction stir processed AA7075-T651 metal matrix composites Ikumapayi O.M., Akinlabi E.T., Majumdar J.D. By Surface Topography: Metrology and Properties 7 - (2019)
Wear behaviour of Electron beam surface melted Inconel 718 Sharma S. K., Biswas K. , Dutta Majumdar J. By Procedia Manufacturing 35 35 866-873 (2019)
Influences of 17-4PH Stainless Steel and Î± + Î² Titanium Alloy Powders for Corrosion Susceptibility on Friction Stir-Processed AA7075-T651 Aluminium Matrix Composites Ikumapayi O.M., Akinlabi E.T., Majumdar J.D., Akinlabi S.A. By Journal of Bio- and Tribo-Corrosion 5 - (2019)
Influences of 17-4PH Stainless Steel and + Titanium Alloy Powders for Corrosion Susceptibility on Friction Stir-Processed AA7075-T651 Aluminium Matrix Composites Ikumapayi O. M., Akinlabi E. T., Majumdar J. D., Akinlabi S. A. By Journal of Bio-and Tribo-Corrosion 5 1-11 (2019)
Microstructural Evolution and Microhardness of Direct Laser Clad TiC Dispersed Titanium Aluminide (Ti45Al5Nb0.5Si) Alloy Majumdar J. D., Rittinghaus S. ., Wissenbach K. , Höche D. , Blawert C. , Weisheitc A. By Procedia Manufacturing 35 840-846 (2019)
Microstructure and corrosion behavior of laser induced periodic patterned titanium based alloy Kumari R., Pfleging W., Besser H., Majumdar J.D. By Optics and Laser Technology 116 196-213 (2019)
Microstructure and corrosion behavior of laser induced periodic patterned titanium based alloy Kumari R., Pfleging W. , Besser H. , Majumdar J. D. By Optics & Laser Technology 116 196-213 (2019)
Microstructure and mechanical properties of sputtered Aluminum thin films thin films Mwema F. M., Akinlabi E. T., Oladijo O. P., Krishna S. , Majumdar J. D. By Procedia Manufacturing 35 929-934 (2019)
Interfacial microstructural and corrosion characterizations of friction stir welded AA6061-T6 and AISI304 materials Mahto R. P., Anishetty S. , Sarkar A. , Mypati O. , Pal S. K., Majumdar J. D. By Metal and Material International 25 752-767 (2019)
Interfacial Microstructural and Corrosion Characterizations of Friction Stir Welded AA6061-T6 and AISI304 Materials Mahto R.P., Anishetty S., Sarkar A., Mypati O., Pal S.K., Majumdar J.D. By Metals and Materials International 25 752-767 (2019)
Optimization of Melt Zone Area for Electron Beam Welded Hastelloy C-276 Sheet and Study of Corrosion Resistance of the Optimized Melt Zone in 3.5 wt% NaCl Aqueous Solution Bal K. S., Dutta Majumdar J. , Roy Choudhury A. By Arabian Journal for Science and Engineering 44(2), pp. 1617-1630 44 1617-1630 (2019)
A survey on reinforcements used in friction stir processing of aluminium metal matrix and hybrid composites Ikumapayi O. M., Akinlabi E. T., Pal S. K., Dutta Majumdar J. By Procedia Manufacturing 35 935-940 (2019)
Investigation into the intergranular corrosion behaviour of electron beam welded Hastelloy C-276 sheet using laser displacement sensor Bal K. S., Majumdar J. D., Choudhury A. R. By Measurement 144 345-365 (2019)
Investigation into the intergranular corrosion behaviour of electron beam welded Hastelloy C-276 sheet using laser displacement sensor Bal K. S., Majumdar J. D., Choudhury A. R. By Measurement 144 345-365 (2019)
Effect of electron beam accelerating voltage on the melt zone area, secondary-dendrite arm spacing and fusion line microstructure of bead-on-plate welded Hastelloy C-276 sheet Bal K. S., Dutta Majumdar J. , Roy Choudhury A. By Optik, Volume 183, April 2019, Pages 355-366 183 355-366 (2019)
Effect of Elemental Coating of Sn or Zn by Magnetron Sputtering on Corrosion and Wear Resistance of Interstitial-Free Steel Debnath1 M. K., Anishetty S. , Majumdar J. D., Manna I. By INAE Letters 1-9 (2019)
Evolution of microstructure and wear properties of aluminum thin films with sputtering substrate temperature Mwema F. M., Oladijo O. P., Akinlabi E. T., Majumdar J. D. By IEEE 31-36 (2019)
Studies on Microstructure and Mechanical properties of Aluminium Foam prepared by Spray Forming Route Shukla A. K., Majumdar J. D. By Procedia Manufacturing 35 861-865 (2019)
Studies on Ti, Zn and Ti + Zn Bilayer Coatings on Interstitial Free Steel for Enhancement of Wear and Corrosion Resistance Debnath M. K., Majumdar J. D., Kumar A. , Seth S. , Mukherjee S. , Manna I. By Journal of Materials Engineering and Performance 28 4434-4442 (2019)
Studies on wear behavior of aluminium foam developed by spray forming route Shukla A. K., Dutta Majumdar J. By Materials Today: Proceedings 19 - (2019)
Study of intergranular corrosion mechanism of fiber laser welded 3-mm-thick Hastelloy C-276 sheet Bal K. S., Majumdar J. D., Choudhury A. R. By Corrosion Science 157 406-419 (2019)
Laser surface alloying (LSA) of AISI 304 stainless steel with 20WC+40Co+40NiCr for improving wear resistance Chakraborty A., Manna I. , Sen D. , Pityana S. , Dutta T. , Majumdar J. D. By Lasers in Engineering 43 101-119 (2019)
Study of melting efficiency, micro- segregation, and corrosion resistance of Ytterbium fiber laser welded Hastelloy C-276 sheet in pulsed wave mode Bal K. S., Sadhu A. , Majumdar J. D., Choudhury A. R. By Advances in Materials and Processing Technologies 00 - (2019)
Study of melting efficiency, micro-segregation, and corrosion resistance of Ytterbium fiber laser welded Hastelloy C-276 sheet in pulsed wave mode Bal K. S., Majumdar J. D., Choudhury A. R. By Advances in Materials and Processing Technologies 1-14 (2019)
Wear Behavior of Plasma Spray Deposited and Post Heat-Treated Hydroxyapatite (HA)-Based Composite Coating on Titanium Alloy (Ti-6Al-4V) Substrate Kumari R., Majumdar J. D. By Metallurgical and Materials Transactions A 49 3122-3132 (2018)
Wear Behavior of Plasma Spray Deposited and Post Heat-Treated Hydroxyapatite (HA)-Based Composite Coating on Titanium Alloy (Ti-6Al-4V) Substrate Kumari R., Majumdar J.D. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 49 3122-3132 (2018)
Laser Surface Melting of AISI 316L Stainless Steel for Bio-implant Application Manna I., Majumdar J. D., Kumar A. , Pityana S. By Proceedings of the National Academy of Sciences India Section A - Physical Sciences 88 387-403 (2018)
Minimization of bead geometry by optimization of regression equations for laser-beam bead-on-plate welded Hastelloy C-276 sheet Bal K. S., Dutta Majumdar J. , Roy Choudhury A. By Journal of the Brazilian Society of Mechanical Sciences and Engineering 40 - (2018)
Review on thermal, thermomechanical and thermal stress distribution during friction stir welding Ikumapayi O.M., Akinlabi E.T., Majumdar J.D. By International Journal of Mechanical Engineering and Technology 9 534-548 (2018)
REVIEW ON THERMAL, THERMO-MECHANICAL AND THERMAL STRESS DISTRIBUTION DURING FRICTION STIR WELDING Ikumapayi O. M., Majumdar J. D. By International Journal of Mechanical Engineering and Technology 9 534-548 (2018)
Elemental micro-segregation characteristic of fiber laser welded Hastelloy C-276 sheet BAL K.S., MAJUMDAR J.D., CHOUDHURY A.R. By Transactions of Nonferrous Metals Society of China (English Edition) 28 2236-2247 (2018)
Elemental micro-segregation characteristic of fiber laser welded Hastelloy C-276 sheet Bal K. S., Dutta Majumdar J. , Roy Choudhury A. By Transactions of Nonferrous Metals Society of China, Volume 28, Issue 11, November 2018, Pages 2236-2247 28 2236-2247 (2018)
Study on uni-axial tensile strength properties of Ytterbium fiber laser welded Hastelloy C-276 sheet Bal K. S., Dutta Majumdar J. , Roy Choudhury A. By Optics & Laser Technology, Volume 108, December 2018, Pages 392-403 108 392-403 (2018)
Direct laser cladding of the silicide dispersed titanium aluminide (Ti45Al5Nb0.5Si) composites Majumdar J.D., Rittinghaus S.K., Wissenbach K., HÃ¶che D., Blawert C., Weisheit A. By Optics and Laser Technology 106 182-190 (2018)
Direct laser cladding of the silicide dispersed titanium aluminide (Ti45Al5Nb0.5Si) composites Majumdar J. D., Rittinghaus S. K., Wissenbach K. , Höche D. , Blawert C. , Weisheit A. By Optics & Laser Technology 106 182-190 (2018)
Studies on corrosion resistance and bio-activity of plasma spray deposited hydroxylapatite (HA) based TiO2 and ZrO2 dispersed composite coatings on titanium alloy (Ti-6Al-4V) and the same after post spray heat treatment Kumari R., Majumdar J. D. By Applied Surface Science 420 935-943 (2017)
Studies on Electron Beam Surface Melting of AISI 316 Stainless Steel and AISI 347 Stainless Stee Basak S., Sahoo K. K., Sharma S. K., Majumdar J. D. By Procedia Manufacturing 7 647-653 (2017)
Studies on Electron Beam Welded Inconel 718 Similar Joints Sharma S. K., Agarwal P. , Majumdar J. D. By Procedia Manufacturing 7 654-659 (2017)
Laser Surface Alloying of AISI 304 Stainless Steel with WC+ Co+ NiCr for Improving Wear Resistance Chakraborty A., Pityana S. , Majumdar J. D. By Procedia Manufacturing 7 8-14 (2017)
Heat-Treated TiO 2 Plasma Spray Deposition for Bioactivity Improvement in Ti-6Al-4V Alloy Kumari R., Majumdar J. D. By Journal of Materials Engineering and Performance 26 6207-6218 (2017)
Thermophysical behavior of thermal sprayed yttria stabilized zirconia based composite coatings Nath S., Manna I. , Jha A. K., Sharma S. C., Pratihar S. K., Majumdar J. D. By Ceramics International 43 11204-11217 (2017)
Corrosion behavior and high temperature oxidation kinetics of nano-TiO2/Y2O3 dispersed zirconium alloys Nuthalapati M., Karak S. K., Majumdar J. D., Chakravarty D. , Basu A. By Journal of Alloys and Compound 689 908-917 (2016)
Development and Characterization of Yttria Stabilized Zirconia and Al 2 O 3 Thin Films by Pulsed Laser Deposition Nath S., Manna I. , Ray S. K., Majumdar J. D. By Lasers In Egineering 35 101-122 (2016)
Special Issue 3rd International Conference on Lasers and Plasma Applications in Materials Science 2015 (LAPAMS 2015) Preface Majumdar J. D., Manna I. , Lawrence J. By Lasers in Engineering 1-1 (2016)
Nano-Boride Dispersed Coating on AISI 304 Stainless Steel by Hybrid HVOF Spraying and Laser Melting Sharma P., Majumdar J. D. By Advanced Science Letters 22 266-270 (2016)
Investigation on femto-second laser irradiation assisted shock peening of medium carbon (0.4% C) steel Majumdar J. D., Gurevich E. , Kumari R. , Ostendorf A. By Applied Surface Science 364 133-140 (2016)
Studies on nano-crystalline CoNiCrAlY consolidated by conventional and microwave sintering Sharma P., Majumdar J. D. By Advanced Powder Technology 27 72-84 (2016)
Studies on nanotribological and oxidation resistance properties of yttria stabilized zirconia (YSZ), alumina (Al 2 O 3) based thin films developed by pulsed laser deposition Nath S., Manna I. , Ray S. K., Majumdar J. D. By Ceramic International 42 7060-7071 (2016)
Studies on Titanium Cenosphere Composite Developed by Powder Metallurgy Route Majumdar D. D., Mondal D. P., Chowdhury A. R., Rao H. , Majumdar J. D. By Advanced Materials Research 1139 55-58 (2016)
Effect of Cenosphere Size and Volume Fraction on the Microstructure and Deformation Behavior of Ti-Cenosphere Syntactic Foam Made Through Powder Metallurgy Route Pandey S., Venkat A. , Mondal D. P., Majumdar J. D., Jha A. K., Rao H. , Kumar H. By Materials Performance and Characterization 5 266-288 (2016)
Microstructural Characterization of Multilayered Coating on Titanium Based Alloy (Ti 6Al 4V) Substrate for Bio-Implant Application Kumari R., Majumdar J. D. By Advanced Science Letters 256-260 (2016)
Microstructure and Mechanical Properties of Double Pass Laser Welds on 6061-T6 Aluminium Alloy Narsimhachary D., Bathe R. N., Majumdar J. D., Padmanabhan G. , Basu A. By Lasers in Engineering 33 53-66 (2016)
Microstructures and Properties of Plasma Electrolytic Oxidized Ti Alloy (Ti-6Al-4V) for Bio-implant Application Kumari R., Blawert C. , Majumdar J. D. By Metallurgical and Materials Transactions A 47 788-800 (2016)
Corrosion Behaviour and Bioactivity of a Laser Surface Melted AISI 316L Stainless Steel Kumar A., Roy S. K., Pityana S. , Majumdar J. D. By Lasers in Engineering 30 31-49 (2015)
Laser surface alloying of Al with Cu and Mo powders Pityana S. L., Camagu S. T., Majumdar J. D. By Journal of the Southern African Institute of Mining and Metallurgy 115 193-198 (2015)
Laser surface textured titanium alloy (Ti 6Al 4V): Part 1 Surface characterization Pfleging W., Kumari R. , Besser H. , Scharnweber T. , Majumdar J. D. By Applied Surface Science 355 104-111 (2015)
Laser surface textured titanium alloy (Ti 6Al 4V) Part II Studies on bio-compatibility Kumari R., Scharnweber T. , Pfleging W. , Besser H. , Majumdar J. D. By Applied Surface Science 357 750-758 (2015)
Microstructural characterisation and property evaluation of titanium cenosphere syntactic foam developed by powder metallurgy route Mandal D. P., Majumdar D. D., Bharti R. K., Majumdar J. D. By Powder metallurgy 58 289-299 (2015)
Microstructural Characterization and Wear Behavior of Nano-Boride Dispersed Coating on AISI 304 Stainless Steel by Hybrid High Velocity Oxy-Fuel Spraying Laser Surface Melting Sharma P., Majumdar J. D. By Metallurgical and Materials Transactions A 56 3157-3165 (2015)
Microstructure and Mechanical Properties of Laser Clad and Post-cladding Tempered AISI H13 Tool Steel Telasang G., Majumdar J. D., Wasekar N. , Padmanabham G. , Manna I. By Metallurgical and Materials Transactions A 46 2309-2321 (2015)
Effect of Aluminum Coating on the Surface Properties of Ti-(~49 at. pct) Ni Alloy Sinha A., Khan G. G., Mondal B. , Majumdar J. D., Chattopadhyay P. P. By Metallurgical and Materials Transactions B 46 1951-1958 (2015)
Nanomechanical behavior of yttria stabilized zirconia (YSZ) based thermal barrier coating Nath S., Manna I. , Majumdar J. D. By Ceramics International 41 5247-5256 (2015)
Wear and corrosion behavior of laser surface engineered AISI H13 hot working tool steel Telasang G., Majumdar J. D., Padmanabham G. , Manna I. By Surface and Coatings Technology 261 69-78 (2015)
Nano-Borides and Silicide Dispersed Composite Coating on AISI 304 Stainless Steel by Laser-Assisted HVOF Spray Deposition Sharma P., Majumdar J. D. By Journal of thermal spray technology 23 1105-1115 (2014)
Structure property correlation in laser surface treated AISI H13 tool steel for improved mechanical properties Telasang G., Majumdar J. D., Padmanabham G. , Manna I. By Materials Science and Engineering: A 599 255-267 (2014)
Effect of laser parameters on microstructure and hardness of laser clad and tempered AISI H13 tool steel Telasang G., Majumdar J. D., Padmanabham G. , Tak M. , Manna I. By Surface and Coatings Technology 258 1108-1118 (2014)
Phase Evolution and Mechanical Properties of Nano-TiO2 Dispersed Zr-Based Alloys by Mechanical Alloying and Conventional Sintering Nuthalapati M., Karak S. K., Majumdar J. D., Basu A. By Metallurgical and Materials Transactions A 45 3748-3754 (2014)
Titanium cenosphere syntactic foam with coarser cenosphere fabricated by powder metallurgy at lower compaction load Jha N., Mondal D. P., Goel M. D., Majumdar J. D., Das S. , Modi O. P. By Transactions of Nonferrous Metals Society of China 24 89-99 (2014)
Characteristics and wear behavior of cenosphere dispersed titanium matrix composite developed by powder metallurgy route Mondal D. P., Majumdar J. D., Goel M. D., Gupta G. By Transactions of Nonferrous Metals Society of China 24 1379-1386 (2014)
Kinetics and mechanism of isothermal oxidation of compositionally graded yttria stabilized zirconia (YSZ) based thermal barrier coating Nath S., Manna I. , Majumdar J. D. By Corrosion Science 88 10-22 (2014)
Laser Surface Cladding of Ti-6Al-4V on AISI 316L Stainless Steel for Bio-implant Application. Kumar A., Roy S. K., Berger H. , Majumdar J. D. By Lasers in Engineering 28 11-33 (2014)
Mechanical and Electro-Chemical Properties of Laser Surface Alloyed AISI 304 Stainless Steel with WC+Ni+NiCr Majumdar J. D. By Physics Procedia 41 335-345 (2013)
Microstructural Characterization and Properties Evaluation of Ni-Based Hardfaced Coating on AISI 304 Stainless Steel by High Velocity Oxyfuel Coating Technique Sharma P., Majumdar J. D. By Metallurgical and Materials Transactions A 44 372-380 (2013)
Microstructure and mechanical properties of nano-Y2O3 dispersed ferritic alloys synthesized by mechanical alloying and consolidated by hydrostatic extrusion Karak S. K., Majumdar J. D., Witczak Z. , Lojkowski W. , Manna I. By Materials Science and Engineering: A 580 231-241 (2013)
Compositionally graded thermal barrier coating by hybrid thermal spraying route and its non-isothermal oxidation behavior Nath S., Manna I. , Majumdar J. D. By Journal of thermal spray technology 22 901-917 (2013)
Highly porous open cell Ti-foam using NaCl as temporary space holder through powder metallurgy route Jha N., Mondal D. P., Majumdar J. D., Badkul A. , Jha A. K., Khare A. K. By Materials & Design 47 810-819 (2013)
Surface Characterization and Wear Behaviour of Laser Surface Melted AISI 316L Stainless Steel Kumar A., Pityana S. , Majumdar J. D. By Lasers in Engineering 24 147-166 (2013)
Isothermal and non-isothermal oxidation kinetics of nanooxide dispersed high Cr ferritic steel prepared by mechanical alloying Karak S. K., Majumdar J. D., Manna I. By Powder Metallurgy 56 310-316 (2013)
Laser-Surface Alloying of Nimonic 80 with Silicon and Aluminum and its Oxidation Behavior Majumdar J. D., Manna I. By Metallurgical Transaction A, 43 3786-3798 (2013)
Evaluation of Microstructure and Mechanical Properties of Nano-Y2O3-Dispersed Ferritic Alloy Synthesized by Mechanical Alloying and Consolidated by High-Pressure Sintering Karak S. K., Majumdar J. D., Witczak Z. , Lojkowski W. , Ciupi Ski L. , Kurzyd Owski K. J., Manna I. By Metallurgical and Materials Transactions A 44 2884-2894 (2013)
Laser surface alloying of aluminium with WC+ Co+ NiCr for improved wear resistance Nath S., Pityana S. , Majumdar J. D. By Surface and Coatings Technology 206 3333-3341 (2012)
Laser-surface alloying of nimonic 80 with silicon and aluminum and its oxidation behavior Majumdar J. D., Manna I. By Metallurgical and Materials Transactions A 43 3786-3796 (2012)
Effect of laser post-treatment on Al2O3-Tib2-tin composite coating with free hbn Chatterjee S., Majumdar J. D., Shariff S. M., Padmanabham G. , Roy Choudhury A. By International journal of advanced manufacturing technology 61 559-567 (2012)
Effect of laser post-treatment on Al2O3-TiB2-TiN composite coating with free hBN Chatterjee S., Majumdar J. D., Shariff S. M., Padmanabham G. , Choudhury A. R. By The International Journal of Advanced Manufacturing Technology 61 559-567 (2012)
Microstructural characterization and surface properties of zinc phosphated medium carbon low alloy steel Kumar A., Bhola S. K., Majumdar J. D. By Surface and Coatings Technology 206 3693-3699 (2012)
Microstructure and mechanical properties of nano-Y2O3 dispersed ferritic steel synthesized by mechanical alloying and consolidated by pulse plasma sintering Karak S. K., Majumdar J. D., Lojkowski W. , Michalski A. , Ciupinski L. , Kurzyd Owski K. J., Manna I. By Philosophical Magazine 92 516-534 (2012)
Structure and properties of CrxN coating Basu A., Majumdar J. D., Manna I. By Surface Engineering 28 199-204 (2012)
Structure property-correlation in laser surface alloyed AISI 304 stainless steel with WC+ Ni+ NiCr Anandan S., Pityana S. , Majumdar J. D. By Materials Science and Engineering: A 536 159-169 (2012)
Surface Characterization and Mechanical Properties Evaluation of Boride-Dispersed Nickel-Based Coatings Deposited on Copper Through Thermal Spray Routes Sharma P., Majumdar J. D. By Journal of thermal spray technology 21 800-809 (2012)
Complete and incomplete wetting of ferrite grain boundaries by austenite in the low-alloyed ferritic steel Straumal B. B., Kucheev Y. O., Efron L. I., Petelin A. L., Majumdar J. D., Manna I. By Journal of materials engineering and performance 21 667-670 (2012)
Laser material processing Majumdar J. D., Manna I. By International materials reviews 56 341-388 (2011)
Advances in Metallic Materials Processing Majumdar J. D., Smurov . , Sun S. , Manna I. By Advances in Materials Science and Engineering 2011 - (2011)
Performance evaluation of laser surface alloyed hard nanostructured Al2O3 TiB2 TiN composite coatings with in-situ and ex-situ reinforcements Chatterjee S., Majumdar J. D., Singaiah K. , Shariff S. M., Padmanabham G. , Choudhury A. R. By Surface and Coatings Technology 205 3478-3484 (2011)
Grain Boundary Segregation and Amount of Bulk Carbides in Severely Deformed Fe C Alloys B., Rodin A. O., Petelin A. L., Baretzky B. , Protasova S. , Dobatkin S. V., Majumdar J. D., Manna I. By Defect and Diffusion Forum 309 51-62 (2011)
Laser gas alloying of Ti-6Al-4V Majumdar J. D. By Physics Procedia 12 472-477 (2011)
Laser Surface Cladding of EN19 Steel with Stellite 6 for Improved Wear Resistance Gupta D., Mordike B. L., Shariff S. , Padmanabhan G. , Manna I. , Majumdar J. D. By Lasers in Engineering 19 317-330 (2010)
Development of in-situ composite surface on mild steel by laser surface alloying with silicon and its remelting Majumdar J. D. By Surface and Coatings Technology 205 1820-1825 (2010)
Development of in-situ composite surface on mild steel by laser surface alloying with silicon and its remelting Majumdar J. D. By Surface and Coating Technology 205 1820-1825 (2010)
Mechanical properties of a laser-surface-alloyed magnesium-based alloy (AZ91) with nickel Majumdar J. D., Manna I. By Scripta Materialia 62 579-581 (2010)
Mechanical properties of a laser-surface-alloyed magnesium-based alloy (AZ91) with nickel Majumdar J. D., Manna I. By Scripta Materialia 62 579-581 (2010)
Studies on laser surface melting of tool steel-Part II: Mechanical properties of the surface Majumdar J. D., Nath A. K., Manna I. By Surface and Coatings Technology 204 1326-1329 (2010)
Studies on laser surface melting of tool steel-Part I: Surface characterization and it's electrochemical behavior Majumdar J. D., Nath A. K., Manna I. By Surface and Coatings Technology 204 1321-1325 (2010)
Studies on wear behavior of nano-Y2O3 dispersed ferritic steel developed by mechanical alloying and hot isostatic pressing Karak S. K., Vishnu C. S., Witczak Z. , Lojkowski W. , Majumdar J. D., Manna I. By Wear 270 5-11 (2010)
Laser surface cladding of EN19 steel with stellite 6 for improved wear resistance Gupta D., Mordike B. L., Shariff S. , Padmanabhan G. , Manna I. , Majumdar J. D. By Lasers in Engineering 2 317-330 (2009)
Corrosion Protection by Laser Surface Modification Majumdar J. D., Manna I. By Corrosion Reviews 27 417-461 (2009)
Diode laser assisted surface nitriding of Ti-6Al-4V: Properties of the nitrided surface Biswas A., Li . , Chatterjee U. K., Manna I. , Majumdar J. D. By Metallurgical and Materials Transactions A 40 3031-3037 (2009)
Direct laser cladding of Co on Ti 6Al 4V with a compositionally graded interface Majumdar J. D., Manna I. , Kumar A. , Bhargava P. , Nath A. K. By Journal of materials processing technology 209 2237-2243 (2009)
Evaluation of electrochemical properties of thermally oxidised Ti-6Al-4V for bioimplant application Biswas A., Manna I. , Chatterjee U. K., Bhattacharyya U. , Majumdar J. D. By Surface Engineering 25 141-145 (2009)
Corrosion resistance improvement of high carbon low alloy steel by plasma nitriding Basu A., Majumdar J. D., Alphonsa J. , Mukherjee S. , Manna I. By Materials Letters 62 3117-3120 (2008)
Studies on compositionally graded silicon carbide dispersed composite surface on mild steel developed by laser surface cladding Majumdar J. D., Chandra B. R., Nath A. K., Manna I. By Journal of Materials Processing Technology 203 505-512 (2008)
Studies on laser surface melting of Al-11% Si alloy Biswas A., Mordike B. L., Manna I. , Majumdar J. D. By Lasers in Engineering 18 95-105 (2008)
Studies on thermal oxidation of Mg-alloy (AZ91) for improving corrosion and wear resistance Majumdar J. D., Bhattacharyya U. , Biswas A. , Manna I. By Surface and Coatings Technology 202 3638-3642 (2008)
Laser surface coating of Fe Cr Mo Y B C bulk metallic glass composition on AISI 4140 steel Basu A., Samant A. N., Harimkar S. P., Majumdar J. D., Manna I. , Dahotre N. B. By Surface and Coatings Technology 202 2623-2631 (2008)
Mechanical and electrochemical properties of laser surface nitrided Ti 6Al 4V Biswas A., Li L. , Chatterjee U. K., Manna I. , Pabi S. K., Majumdar J. D. By Scripta Materialia 59 239-242 (2008)
Chemical oxidation of Ti-6Al-4V for improved wear and corrosion resistance Biswas A., Srikant P. , Manna I. , Chatterjee U. K., Majumdar J. D. By Surface Engineering 24 442-446 (2008)
Plasma nitriding of a low alloy high carbon steel Basu A., Majumdar J. D., Alphonsa J. , Mukherjee S. , Manna I. By Transactions of the Indian Institute of Metals 60 471-479 (2007)
Surface Oxidation of Ti-4Al-4V for Bio-implant Application Biswas A., Bhattacharjee U. , Manna I. , Majumdar J. D. By Surface Review and Letters 14 597-600 (2007)
Friction and wear behavior of laser composite surfaced aluminium with silicon carbide Majumdar J. D., Chandra B. R., Manna I. By Wear 262 641-648 (2007)
Laser Assisted Surface Modification of Ti-6Al-4V for Bio-Implant Application Biswas A., Chatterjee U. K., Li L. , Manna I. , Majumdar J. D. By Surface Review and Letters 14 531-534 (2007)
Laser composite surfacing of AISI 304 stainless steel with titanium boride for improved wear resistance Majumdar J. D., Chandra B. R., Manna I. By Tribology International 40 146-152 (2007)
Laser Composite Surfacing of Copper for Improved Tribological Properties Majumdar J. D., Chandra B. R., Biswas D. , Nath A. K., Manna I. By Surface engineering 23 120-122 (2007)
Laser surface hardening of austempered (bainitic) ball bearing steel Basu A., Chakraborty, J. , Shariff, S. M., Padmanabham G. , Joshi S. V., Sundararajan G. , Majumdar J. D., Manna I. By Scripta Materialia 56 887-890 (2007)
Laser Surface Treatment of Ti-6Al-4V for Bio-implant Application Biswas A., Li L. , Maity T. K., Chatterjee U. K., Mordike B. L., Manna I. , Majumdar J. D. By Lasers in Engineering 17 59-73 (2007)
Microstructural and texture studies of gas nitrided Cr-coated low alloy high carbon steel Basu A., Majumdar J. D., Chowdhury S. G., Ajikumar P. K., Shankar P. , Tyagi A. K., Raj B. , Manna I. By Surface and Coatings Technology 201 6985-6992 (2007)
Compositionally Graded Silicon Carbide Dispersed Metal Matrix Composite on Aluminium by Laser Surface Engineering Majumdar J. D., Chandra B. R., Nath A. K., Manna I. By Materials Science and Engineering: A 433 241-250 (2006)
In-situ Dispersion of Titanium Boride on Aluminium by Laser Composite Surfacing for Improved Wear Resistance Majumdar J. D., Chandra B. R., Nath A. K., Manna I. By Surface and Coatings Technology 201 1236-1242 (2006)
In-situ Dispersion of Titanium Boride on Copper by Laser Composite Surfacing for Improved Wear Resistance Majumdar J. D., Chandra B. R., Biswas D. , Mordike B. L., Manna I. By Lasers in Engineering 16 333-348 (2006)
Laser and Plasma assisted Surface Engineering of Materials Majumdar J. D., Manna I. By Plasma Processing Update 50 47-53 (2006)
Laser assisted fabrication of Co on Ti-6Al-4V for bio-implant Application Majumdar J. D., Ganesan S. M., Manna I. , Nath A. K. By physica status solidi (a) 203 2236-2240 (2006)
Laser Assisted Surface Modification of Titanium and Its Alloys Majumdar J. D., Manna I. By METALS MATERIALS AND PROCESSES 18 361-386 (2006)
Laser Composite Surfacing of Magnesium Alloy with Chromium Carbide Majumdar J. D., Galun R. , Mordike B. L., Chandra B. R., Manna I. By Lasers In Engineering 16 349-359 (2006)
Laser Composite Surfacing of Stainless Steel with SiC Majumdar J. D., Chandra B. R., Nath A. K., Manna I. By physica status solidi (a) 203 2260-2265 (2006)
Laser surface cladding of Fe B C, Fe B Si and Fe BC Si Al C on plain carbon steel Manna I., Majumdar J. D., Chandra B. R., Nayak S. , Dahotre N. B. By Surface and Coatings Technology 201 434-440 (2006)
Laser Surface Nitriding of Ti-6Al-4V for Bio-implant Application Biswas A., Maity T. K., Chatterjee U. K., Manna I. , Li L. , Majumdar J. D. By Trends in Biomaterials and Artificial Organs 20 68-71 (2006)
Laser Assisted Fabrication of 316L Stainless Steel Majumdar J. D., Manna I. , Li L. By Steel in Construction 6 47-58 (2005)
LASER COMPOSITE SURFACING OF AISI 304 STAINLESS STEEL WITH Fe+ SiC AND TiB 2 Majumdar J. D., Chandra B. R., Nath A. K., Manna I. By Transactions of the Indian Institute of Metals 58 - (2005)
Mechanical and Electrochemical Properties of Multiple Layer Diode Laser Cladding of 316L Stainless Steel Majumdar J. D., Pinkerton A. , Liu Z. , Manna I. , Li L. By Applied Surface Science 247 373-377 (2005)
Microstructural Characterization and Process Optimization of Laser Assisted Fabrication of 316L Stainless Steel Majumdar J. D., Pinkerton A. , Liu Z. , Manna I. , Li L. By Applied Surface Science 247 320-327 (2005)
Studies of Defects in Laser Surface Treated Magnesium and Its Alloy Majumdar J. D., Mishra P. , Das D. , Mordike B. L., Manna I. By Lasers in Engineering 14 193-211 (2004)
Studies on laser assisted fabrication of AISI 316 L stainless steel Majumdar J. D., Ganeshan S. M., Manna I. , Li L. By Transactions of the Indian Institute of Metals 57 - (2004)
Studies on laser bending of stainless steel Majumdar J. D., Nath A. K., Manna I. By Materials Science and Engineering: A 385 113-122 (2004)
Studies on laser surface alloying of a Mg alloy with nickel Majumdar J. D., Galun R. , Mordike B. L., Manna I. By Proceedings of the International Conference on Advances in Surface Treatment: Research and Applications, ASTRA 186-190 (2004)
Studies on Residual Stress Developed In Laser Surface Irradiated 0.6% Carbon Steel Majumdar J. D., Nath A. K., Kumar B. R., Manna I. By Lasers in Engineering 14 133-151 (2004)
Laser Surface Alloying of Nimonic with Si+ Al to Enhance Oxidation Resistance Majumdar J. D., Manna I. By Proceedings of the International Conference on Advances in Surface Treatment: Research & Applications (ASTRA) 3 207- (2004)
Laser Surface Engineering of a Mg Alloy with Al + Al2O3 Majumdar J. D., Chandra B. R., Mordike B. L., Galun R. , Manna I. By Surface and Coatings Technology 179 297-305 (2004)
Structure-property correlation in laser surface alloyed Mg with Ni Manna I., Galun R. , Mordike B. L., Majumdar J. D. By Transactions of the Indian Institute of Metals 56 - (2003)
Studies on laser surface melting of steel Majumdar J. D., Nath A. K., Manna I. By Transactions of the Indian Institute of Metals - (2003)
Effect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy Majumdar J. D., Galun R. , Mordike B. L., Manna I. By Materials Science and Engineering: A 361 119-129 (2003)
Laser composite surfacing of a magnesium alloy with silicon carbide Majumdar J. D., Chandra B. R., Galun R. , Mordike B. L., Manna I. By Composites Science and Technology 63 771-778 (2003)
Laser processing of materials Majumdar J. D., Manna I. By Sadhana-Academy Proceedings in Engineering Sciences 28 495-562 (2003)
A Mathematical Model to Predict the Thermal History and Microstructure Developed in Laser Surface Alloying Majumdar J. D., Manna I. By Lasers in Engineering 12 171-190 (2002)
High-Temperature Oxidation Behavior of Laser-Surface-Alloyed Ti with Si and Si+ Al Majumdar J. D., Mordike B. L., Roy S. K., Manna I. By Oxidation of Metals 57 473-498 (2002)
Laser surface alloying of an Mg alloy with Al+ Mn to improve corrosion resistance Majumdar J. D., Maiwald T. , Galun R. , Mordike B. L., Manna I. By Lasers in Engineering 12 147-169 (2002)
Friction and Wear Behavior of Ti Following Laser Surface Alloying with Si, Al and Si+Al Majumdar J. D., Mordike B. L., Manna I. By Wear 242 18-27 (2000)
Laser surface alloying of AISI 304-stainless steel with molybdenum for improvement in pitting and erosion corrosion resistance Majumdar J. D., Manna I. By Materials Science and Engineering: A 267 50-59 (1999)
Laser surface alloying of copper with chromium II. Improvement in mechanical properties Majumdar J. D., Manna I. By Materials science & engineering. A, Structural materials: properties, microstructure and processing 268 227-235 (1999)
Laser surface alloying of copper with chromium I. Microstructural evolution Majumdar J. D., Manna I. By Materials science & engineering. A 268 216-226 (1999)
Laser surface alloying of Ti with Si, Al and Si+ Al for an improved oxidation resistance Majumdar J. D., Weisheit A. , Mordike B. L., Manna I. By Materials Science and Engineering: A 266 123-134 (1999)
Laser Surface Engineering of Copper with Chromium for Enhanced Wear Resistance Manna I., Majumdar J. D., Chatterjee U. K., Nath A. K. By Scripta materialia 35 405-410 (1996)
A one-dimensional heat transfer model for laser surface alloying of chromium on copper substrate Manna I., Majumdar J. D. By Zeitschrift für Metallkunde 86 362-364 (1995)
Improvement in pitting corrosion resistance of austenitic stainless steel by laser surface alloying Manna I., Majumdar J. D., Bharti A. , Rambabu D. , Joshi S. V. By Steel India 18 1-6 (1995)
Surface treatment by laser-melting induced self-propagating high temperature synthesis Zhukov A. A., Majumdar J. D., Manna I. By Journal of materials science letters 14 828-829 (1995)
Improving Wear Resistance of Pure Copper by Laser Surface Alloying with Chromium Manna I., Majumdar J. D., Nath A. K. By Laser News 5 4-5 (1994)
Enhanced kinetics of diffusion coating of aluminium on copper by boundary diffusion Manna I., Majumdar J. D. By Journal of materials science letters 12 920-922 (1993)

Book

Applications of coconut shell ash/particles in modern manufacturing: a case study of friction stir processing Ikumapayi, O., Akinlabi E. T., Majumdar J. D., Akinlabi S. A. By 69-95 (2020)
Corrosion of Alloys Developed by Non-equilibrium Processing Majumdar J. D., Pityana S. , Raja V. S., Zhang Y. , Sing R. , Manna I. By - (2012)
Laser-Assisted Fabrication of Materials Majumdar J. D., Manna I. By - (2012)
Advances in Metallic Materials Processing Majumdar J. D., Sun S. , Smurov I. , Manna I. By - (2011)

Conferences

Microstructure and mechanical properties of sputtered Aluminum thin films Mwema F.M., Akinlabi E.T., Oladijo O.P., Krishna S., Majumdar J.D. By Procedia Manufacturing 35 929-934 (2019)
Influence of wood fly ash reinforcement on the wear behaviour of friction stir processed aluminium-based surface matrix composite Ikumapayi O.M., Akinlabi E.T., Majumdar J.D., Oladijo O.P., Akinlabi S.A. By Proceedings of the International Conference on Industrial Engineering and Operations Management 966-977 (2019)
Laser composite surfacing of a magnesium alloy to improve wear resistance. Majumdar J. D., Chandra B. R., Galun R. , Mordike B. L., Manna I. By ICAMMP-2002: International Conference on Advances in Materials Processing 826-830 (2002)

Symposium

Proceedings of the twenty ninth national symposium on vacuum technology and its application to electron beams Anishetty S., Manna I. , Majumdar J. D. By national symposium on vacuum technology and its application to electron beams; Mumbai (India) 290-290 (2015)
DIRECT LASER DEPOSITION OF 316 L STAINLESS STEEL Majumdar J. D., Manna I. , Li L. By Trends in Materials and Manufacturing Technologies for Transportation Industries and Powder Metallurgy Research and Development in the Transportation Industry 41-44 (2005)

Metallurgical and Materials Engineering

Faculty

Responsibilities

Research Areas

Principal Investigator

Co-Principal Investigator

Ph. D. Students

A Ajay

Aakash Rathore

Abhinay Rajput

Annadaa Shankara Dash

Anupama Dutta

Bidipta Dam

Bipasha Das

Harikrishnan R

Honey Rakesh Gupta

Jeetendra Kumar Singh

Kishan Kumar

Madapana Dileep

Manoj Kumar

Pratim Das

Raghu S

Ranit Karmakar

Ritesh Chandra Barman

Sharath A.

Shree Krishna

Somnath Biswas

Tapas Bera

Tarun Kumar Gayen

Turin Datta