Indian Institute of Technology Kharagpur |

Journal

Effect of LaB6 addition on compressive creep behavior with simultaneous oxide scale growth of spark plasma sintered ZrB2-SiC composites Kashyap S.K., Mitra R. By Journal of the American Ceramic Society 106 1424-1442 (2023)
Effect of Microstructural Evolution on Creep and Rupture Behavior of Inconel 617 Alloy Bagui S., Sahu B.P., Mahato B., Mandal M., Tarafder S., Mitra R. By Journal of Materials Engineering and Performance 32 1292-1309 (2023)
Effect of particle size on additive manufacturing of complex architecture of silicon carbide Jana A., Das M., Tiwari S., Basha S.S., Gautam A.R.S., Panda S.K., Mitra R., Kumar S., Devasia R., Tiwary C.S. By Ceramics International 49 17396-17404 (2023)
3D Printing of Biocompatible Nano-ink Derived from Waste Animal Bones Das M., Jana A. , Mishra R. , Maity S. , Maiti P. , Panda S. K., Mitra R. , Arora A. , Owuor P. S., Tiwary C. S. By ACS Applied Bio Materials 6 1566-1576 (2023)
Evaluation of elastic constants and high temperature tensile behaviour with damage assessment of the SiC seal-coated 2.5D Cf/SiC composites having multilayered interphase and Si-B-C added matrix Krishna R., Parimi V.K., Udayakumar A., Mitra R. By Journal of the European Ceramic Society 43 2388-2401 (2023)
Recrystallization kinetics, precipitate evolution and grain refinement of Nb stabilized ferritic stainless steel for producing thicker plate/strip industrially Modak P., Chakrabarti D. , Mitra R. , Patra S. By Metallurgical and Materials Transactions A 54 1024-1048 (2023)
Controlled directionality in 3D printing of graphite-reinforced polymer composite with enhanced mechanical properties Das M., Mishra R., Das P., Kashyap S.K., Panda S.K., Mitra R., Owuor P.S., Arora A., Tiwary C.S. By Composites Science and Technology 235 - (2023)
Tailoring the Processing Route to Optimize the Strength Toughness Combination of Pearlitic Steel Behera S., Barik R.K., Hasan S.M., Mitra R., Chakrabarti D. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 53 3853-3868 (2022)
Phenomenal Effect of Stable (Ti, Mo)C Nano-Sized Precipitates in Retarding the Recrystallization and Grain Growth in High-Strength Ferritic Steel Modak P., Mandal A., Gupta R., Karmakar A., Sarkar S.K., Ahlawat S., Haldar A., Mitra R., Neogy S., Biswas A., Chakrabarti D. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 53 689-705 (2022)
Effect of Zr or Ga Addition and Annealing on Microstructural Evolution, Deformation and Fracture Behaviour of Nb-19Si-5Mo-20Ti Based Hypereutectic Alloy Sala K., Mitra R. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 53 1717-1737 (2022)
Grain size dependant high-temperature hot corrosion (HTHC) degradation behavior in Alloy 617 during exposure in Na2SO4 + NaCl + V2O5 salt mixture Bhuyan P., Sanyal S., Mitra R., Mandal S. By Journal of Alloys and Compounds 914 - (2022)
Investigation of non-classical creep behavior of Inconel 617 alloy at 700oC and 800oC through interrupted tests and microstructural characterizations Bagui S., Mandal M. , Sahoo B. K., Laha K. , Tarafder S. , Mitra R. By Materials Science and Engineering A 832 142474.1-142474.14 (2022)
Grain size dependant high-temperature hot corrosion (HTHC) degradation behaviour in Alloy 617 during exposure in Na2SO4 + NaCl + V2O5 salt mixture Bhuyan P., Sanyal S. , Mitra R. , Mandal S. By Journal of the alloys and compounds 914 165262.1-165262.14 (2022)
Stable nanocrystalline structure attainment and strength enhancement of Cu base alloy using bi-modal distributed tungsten dispersoids Roy D., Pal S., Tiwary C.S., Gupta A.K., Babu P.N., Mitra R. By Philosophical Magazine 102 189-209 (2022)
Challenges and breakthroughs in the development of high temperature materials Mitra R. By IIM Metal News 24 6-28 (2022)
A novel approach combining grain boundary engineering and grain boundary serration to enhance high-temperature hot corrosion resistance in Alloy 617 Bhuyan P., Sanyal S. , Sarma V. S., Boer B. D., Mitra R. , Mandal S. By Materialia 23 101451-101451 (2022)
Combining crystal plasticity and electron microscopy to elucidate texture dependent micro-mechanisms of tensile deformation in lath martensitic steel Chatterjee A., Basiruddin S. M., Ghosh A. , Mitra R. , Chakrabarti D. By International Journal of Plasticity 153 103251.1-103251.26 (2022)
Oxidation Resistance and Evolution of Multi-layered Oxide Scale During Isothermal and Cyclic Exposure of ZrB2 SiC LaB6 Composites at 1300 °C to 1500 °C Kashyap S.K., Sala K., Mitra R. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 53 147-171 (2022)
Investigation of electrochemical performance of sol-gel derived MgFe2O4 nanospheres as aqueous supercapacitor electrode and bi-functional water splitting electrocatalyst in alkaline medium Maitra S., Mitra R., Nath T.K. By Current Applied Physics 27 73-88 (2021)
Relative effect of B and N concentrations on the microstructural stability and mechanical properties of modified 9Cr-1Mo steel Rejeesh R., Bhattacharya A., Haldar C., Mitra R., Chakrabarti D., Das C.R., Albert S.K., Bhaduri A.K. By Journal of Alloys and Compounds 867 158971- (2021)
Molten Salt Synthesized MgNiO2 Micro/Nano-Particles for High Energy Density Supercapacitor and Electrocatalyst for Hydrogen Evolution Reaction in Alkaline Medium Maitra S., Mitra R. , Nath T. K. By Journal of Nanoscience and Nanotechnology 21 5556-5568 (2021)
Aqueous Mg-Ion Based Supercapacitor and Bifunctional Electro-Catalyst of Sol Gel Derived MgTiO3 Nanoparticles Maitra S., Mitra R. , Nath T. K. By Journal of Nanoscience and Nanotechnology 21 6217-6226 (2021)
Strain-induced microstructural evolution and its implication on high-temperature hot corrosion (HTHC) phenomena in Alloy 617 Bhuyan P., Pradhan S.K., Mitra R., Mandal S. By Materials Characterization 178 - (2021)
Strain-induced microstructural evolution and its implication on high-temperature hot corrosion (HTHC) phenomena in Alloy 617 Bhuyan P., Pradhan S. K., Mitra R. , Mandal S. By Materials Characterization 178 111272- (2021)
Structure and corrosion property of pulse electrodeposited nanocrystalline nickel-tungsten-copper alloy coating Sarangi C.K., Sahu B.P., Mishra B.K., Mitra R. By Journal of Applied Electrochemistry 51 1157-1174 (2021)
Precipitate evolution during aging and its individual role on high-temperature hot corrosion response in Alloy 617 Bhuyan P., Paliwal M., Sarma V.S., de Boer B., Mitra R., Mandal S. By Journal of Alloys and Compounds 871 159499- (2021)
Effect of annealing temperature on microstructure and mechanical response of sputter deposited Ti-Zr-Mo high temperature shape memory alloy thin films Marupalli B.C.G., Adhikary T., Sahu B.P., Mitra R., Aich S. By Applied Surface Science Advances 6 100137.1-100137.9 (2021)
Creep Deformation Behavior of Inconel 617 Alloy in the Temperature Range of 650 °C to 800 °C Bagui S., Sahu B.P., Laha K., Tarafder S., Mitra R. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 52 94-107 (2021)
Effect of Ti Addition and Microstructural Evolution on Toughening and Strengthening Behavior of as Cast or Annealed Nb Si Mo Based Hypoeutectic and Hypereutectic Alloys Sala K., Mitra R. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 52A 3436-3459 (2021)
Effect of Ti addition on the kinetics and mechanism of non-isothermal and isothermal oxidation of Nb Si Mo alloys at 900 °C 1200 °C Sala K., Kashyap S.K., Mitra R. By Intermetallics 138 107338.1-107338.16 (2021)
Effect of Ti or Fe Addition and Annealing on Microstructural Evolution and Mechanical Properties of Hypereutectic Nb-Si-Mo Alloys Sala K., Morankar S., Mitra R. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 52 1185-1211 (2021)
Microstructural evolution and mechanical properties of as-cast and annealed Nb Si Mo based hypoeutectic alloys with quaternary additions of Ti or Fe Sala K., Mitra R. By Materials Science and Engineering A 802 140663- (2021)
Microstructure and composition of multi-layered oxide scale evolved during isothermal exposure of ZrB2 SiC LaB6 composite to air at 1500°C Kashyap S.K., Mitra R. By Philosophical Magazine Letters 201 265-276 (2021)
Microstructure and High-Temperature Tensile Behavior of Ni-Based Superalloy EP741NP for Aerospace Applications Behera S., Dash M.K., Kumar N.K., Mitra R., Appa Rao G. By Journal of Materials Engineering and Performance - (2021)
Sol-gel derived MgCr2O4 nanoparticles for aqueous supercapacitor and alkaline OER and HER bi-functional electrocatalyst applications Maitra S., Mitra R. , Nath T. K. By Journal of Alloys and Compounds 858 157679.1-157679.15 (2021)
A potential insight into the serration behaviour of 3n (n 3) boundaries in Alloy 617 Bhuyan P., Reddy K. V., Pradhan S. K., Pal S. , Mitra R. , Mandal S. By Materials Chemistry and Physics 248 122919- (2020)
Influence of substrate bias voltage on structure and properties of DC magnetron sputtered Ni-Zr alloy thin films Sahu B.P., Dutta A., Mitra R. By Journal of Materials Research 35 1543-1555 (2020)
Pulse electrodeposition and characterization of graphene oxide particle reinforced Ni-W alloy matrix nanocomposite coatings Sarangi C. K., Sahu B. P., Mishra B. K., Mitra R. By Journal of Applied Electrochemistry 50 265-279 (2020)
Investigation of electrochemical performance of MgNiO2 prepared by sol-gel synthesis route for aqueous-based supercapacitor application Maitra S., Mitra R., Nath T.K. By Current Applied Physics 20 628-637 (2020)
Investigation of electrochemical performance of MgNiO2 prepared by sol-gel synthesis route for aqueous-based supercapacitor application Maitra S., Mitra R. , Nath T. K. By Current Applied Physics 20 628-637 (2020)
Kinetics and evolution of oxide scale during various stages of isothermal oxidation at 1300°C in spark plasma sintered ZrB2 - SiC - LaB6 composites Kashyap S. K., Kumar A. , Mitra R. By Journal of the European Ceramic Society 40 4997-5011 (2020)
Structure and properties of Ni1-xTixN thin films processed by reactive magnetron co-sputtering Sahu B. P., Ray M. , Mitra R. By Materials Characterization 169 110604- (2020)
Role of copper content on the structure and corrosion properties of pulse electrodeposited Ni-W-Cu alloy Sarangi C. K., Saha B. P., Mishra B. K., Mitra R. By Journal of Metallurgy and Materials Science 62 107-121 (2020)
Effect of moist air and minor Zr addition on oxidation behavior of arc-melted multiphase Mo-Si-B alloys in the temperature range of 1000oC-1300oC Kumar N. K., Das J. , Mitra R. By Oxidation of Metals 93 483-513 (2020)
Densification behavior involving creep during spark plasma sintering of ZrB2-SiC based ultra-high temperature ceramic composites Kashyap S.K., Mitra R. By Ceramics International 46 5028-5036 (2020)
Electrochemical aspects of sol-gel synthesized MgCoO2 for aqueous supercapacitor and alkaline HER electrocatalyst applications Maitra S., Chakraborty P.K., Mitra R., Nath T.K. By Current Applied Physics 20 1404-1415 (2020)
A combined electron microscopy and atom probe tomography study of the nanocrystalline Ni-Zr thin film Sahu B., Dutta A. , Mitra R. By Journal of Alloys and Compounds 844 156078- (2020)
Tensile creep and rupture behavior along with evolution of microstructure in a Zr-2.5Nb alloy Guguloth K., Ghosh M. , Swaminathan J. , Mitra R. By Materials Science and Engineering A 791 139681- (2020)
Effect of moist environment on the oxidation behavior of Mo76-xSi14B10Fex (x = 0, 0.5, 1 at.%) ultrafine composites in the range of 700 800 °C Kumar N., Mitra R. , Das J. By Corrosion Science 155 86-96 (2019)
Effect of moist environment on the oxidation behavior of Mo 76- x Si 14 B 10 Fe x (x = 0, 0.5, 1 at.%)ultrafine composites in the range of 700â 800â Â°C Kumar N.K., Mitra R., Das J. By Corrosion Science 155 86-96 (2019)
Effect of Zr addition on microstructure, hardness and oxidation behavior of arc-melted and spark plasma sintered multiphase Mo-Si-B alloys Kumar N., Das J. , Mitra R. By Metallurgical and Materials Transactions A 50A 2041-2060 (2019)
Effect of Zr addition on microstructure, hardness and oxidation behavior of arc-melted and spark plasma sintered multiphase Mo-Si-B alloys Kumar N. K., Das J. , Mitra R. By Metallurgical and Materials Transactions A 50A 2041-2060 (2019)
Effect of Zr Addition on Microstructure, Hardness and Oxidation Behavior of Arc-Melted and Spark Plasma Sintered Multiphase Mo-Si-B Alloys Kumar N.K., Das J., Mitra R. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 50 2041-2060 (2019)
Ferrite Grain Refinement, Grain Size Distribution, and Texture After Thermomechanical Processing and Continuous Cooling of Low-C Steel Patra S., Mandal A. , Mandal M. , Kumar V. , Mitra R. , Chakrabarti D. By Metallurgical and Materials Transactions A 50 947-965 (2019)
Ferrite Grain Refinement, Grain Size Distribution, and Texture After Thermomechanical Processing and Continuous Cooling of Low-C Steel Patra S., Mandal A., Mandal M., Kumar V., Mitra R., Chakrabarti D. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 50 947-965 (2019)
Influence of composition on nanoindentation response of Ni-Zr alloy thin films Sahu B. P., Dutta A. , Mitra R. By Metallurgical and Materials Transactions A 50 5656-5669 (2019)
Influence of Composition on Nanoindentation Response of Ni-Zr Alloy Thin Films Sahu B.P., Dutta A., Mitra R. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 50 5656-5669 (2019)
Mechanism of negative strain rate sensitivity in metallic glass film Sahu B. P., Dutta A. , Mitra R. By Journal of Alloys and Compounds 784 488-499 (2019)
X-ray tomography study on porosity and particle size distribution in in-situ Al-4.5Cu-5TiB2 semi-solid rolled composites Morankar S., Mandal M. , Kourra N. , Williams M. A., Mitra R. , Srirangam P. By The Journal of The Minerals, Metals & Materials Society 71 4050-4058 (2019)
Microstructural stability during creep exposure of 9Cr-1Mo steel treated at different normalization temperatures Chatterjee A., Modak P. , Barat K. , Chakrabarti D. , Mitra R. By Journal of Materials Engineering and Performance 28 3076-3093 (2019)
X-Ray Tomography Study on Porosity and Particle Size Distribution in In Situ Al-4.5Cu-5TiB2 Semisolid Rolled Composites Morankar S., Mandal M., Kourra N., Williams M.A., Mitra R., Srirangam P. By JOM 71 4050-4058 (2019)
Microstructural Stability During Creep Exposure of 9Cr-1Mo Steel Treated at Different Normalization Temperatures Chatterjee A., Modak P., Barat K., Chakrabarti D., Mitra R. By Journal of Materials Engineering and Performance 28 3076-3093 (2019)
In-situ and ex-situ study of crystallization behaviour of magnetron sputtered Ni63Zr37 amorphous thin film Sahu B. P., Chatterjee A. , Dutta A. , Mitra R. By Philosophical Magazine A 99 2545-2561 (2019)
Recipe for improving the impact toughness of high-strength pearlitic steel by controlling the cleavage cracking mechanisms Behera S., Barik R. K., Sk M. B., Mitra R. , Chakrabarti D. By Materials Science and Engineering A 764 138256- (2019)
Recipe for improving the impact toughness of high-strength pearlitic steel by controlling the cleavage cracking mechanisms Behera S., Barik R.K., Sk M.B., Mitra R., Chakrabarti D. By Materials Science and Engineering A 764 - (2019)
Relative effect of C and Mn on strength-toughness of medium Mn steels Bhattacharya A., Bokinala P.K., Mitra R., Chakrabarti D. By Materials Science and Technology (United Kingdom) 35 55-67 (2019)
Evaluating the efficacy of grain boundary serrations in attenuating high-temperature hot corrosion degradation in Alloy 617 Bhuyan P., Pradhan S. K., Mitra R. , Mandal S. By Corrosion Science 149 164-177 (2019)
Relative effect of C and Mn on strength-toughness of medium Mn steels Bhattacharyya A., Bokinala P. K., Mitra R. , Chakrabarti D. By Materials Scinece and Technology 35 55-67 (2019)
Effect of Fe addition and moist environment on the high temperature oxidation behavior of Mo76-xSi14B10Fex (x = 0, 0.5, 1â ¯at.%)composites Kumar N.K., Mitra R., Das J. By Intermetallics 111 - (2019)
Effect of Fe addition and moist environment on the high temperature oxidation behavior of Mo76-xSi14B10Fex (x = 0, 0.5, 1 at.%) composites Kumar N., Mitra R. , Das J. By Intermetallics 111 106498-9 (2019)
Study of dry sliding wear behavior of hot-rolled and mushy-state rolled Al-4.5Cu-5TiB2 in-situ composite with analysis of work hardening and subsurface microstructure-microtexture evolution using EBSD Mandal M., Mitra R. By Metallurgical and Materials Transactions A 50A 5356-5372 (2019)
Study of Dry Sliding Wear Behavior of Hot-Rolled and Mushy-State Rolled Al-4.5Cu-5TiB2 In-Situ Composite with Analysis of Work Hardening and Subsurface Microstructure-Microtexture Evolution Using EBSD Mandal M., Mitra R. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 50 5356-5372 (2019)
Effect of LaB6 additions on densification, microstructure, and creep with oxide scale formation in ZrB2-SiC composites sintered by spark plasma sintering Kashyap S. K., Mitra R. By Journal of the European Ceramic Society 39 2782-2793 (2019)
Effect of LaB6 additions on densification, microstructure, and creep with oxide scale formation in ZrB2-SiC composites sintered by spark plasma sintering Kashyap S. K., Mitra R. By Journal of the European Ceramic Society 39 2782-2793 (2019)
Effect of microstructure and microtexture evolution on creep behavior of hot-rolled and mushy-state rolled Al-4.5Cu-5TiB2 in-situ composite Mandal M., Mitra R. By Materials Science and Engineering A 760 88-104 (2019)
Effect of microstructure and microtexture evolution on creep behavior of hot-rolled and mushy-state rolled Al-4.5Cu-5TiB2 in-situ composite Mandal M., Mitra R. By Materials Science and Engineering A 760 88-104 (2019)
Effect of pre-cold rolling on the evolution of microstructure, microtexture, and mechanical properties of the mushy state rolled in-situ Al-4.5Cu-5TiB 2 composite Mandal M., Mitra R. By Materials Characterization 146 267-278 (2018)
Effect of Starting As-cast Structure on the Microstructureâ Texture Evolution During Subsequent Processing and Finally Ridging Behavior of Ferritic Stainless Steel Modak P., Patra S., Mitra R., Chakrabarti D. By Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 49 2219-2234 (2018)
Effect of starting as-cast structure on the microstructure-texture evolution during subsequent processing and finally ridging behavior of ferritic stainless steel Modak P., Patra S. , Mitra R. , Chakrabarti D. By Metallurgical and Materials Transactions A Published online.To be printed soon. - (2018)
Mechanism of creep deformation with evolution of microstructure and texture of Zr-2.5Nb alloy Guguloth K., Mitra R. , Chowdhury S. G., Swaminathan J. By Materials Science and Engineering A 721 286-302 (2018)
Effect of Zr content on structure property relations of Ni-Zr alloy thin films with mixed nanocrystalline and amorphous structure Sahu B. P., Sarangi C. , Mitra R. By Thin Solid Films 660 31-45 (2018)
Accelerated creep behavior of Nb and Cu added 18Cr-8Ni austenitic stainless steel Bagui S., Laha K. , Mitra R. , Tarafder S. By Materials Research Express 5 116515- (2018)
Accelerated creep behavior of Nb and Cu added 18Cr-8Ni austenitic stainless steel Bagui S., Laha K., Mitra R., Tarafder S. By Materials Research Express 5 - (2018)
Influence of a few important parameters on the rheological behaviour of silicon carbide nanoparticles dispersed aqueous suspension Barick P., Mitra R. , Saha B. P. By Ceramic International 44 351-356 (2018)
Role of hierarchical martensitic microstructure on localized deformation and fracture of 9Cr-1Mo steel under impact loading at different temperatures Chatterjee A., Ghosh A. , Moitra A. , Bhaduri A. K., Mitra R. , Chakrabarti D. By International Journal of Plasticity 104 104-133 (2018)
Comparative evaluations and microstructure mechanical property relations of sintered silicon carbide consolidated by various techniques Barick P., Chatterjee A. , Majumdar B. , Saha B. P., Mitra R. By Metallurgical and Materials Transactions A 49 1182-1201 (2018)
Effect of Si3N4 Addition on Oxidation Resistance of ZrB2-SiC Composites Mallik M., Ray K. K., Mitra R. By Coatings 7 92-100 (2017)
Effect of SiC content on electrical, thermal, and ablative properties of pressureless sintered ZrB2-based ultrahigh temperature ceramic composites Mallik M., Kailath A. J., Ray K. K., Mitra R. By Journal of the European Ceramic Society 37 3863-3877 (2017)
Effect of substrate temperature and annealing on structure, stress and properties of reactively co-sputtered Ni-TiN nanocomposite thin films Kumar M., Mitra R. By Thin Solid Films 624 70-82 (2017)
High temperature oxidation response of Al/Ce doped Mo Si B composites Das J., Roy B. , Kumar N. , Mitra R. By Intermetallics 84 101-109 (2017)
Improvement of oxidation resistance of arc-melted Mo76Si14B10 by microstructure control upon minor Fe addition Kumar N., Roy B. , Mitra R. , Das J. By Intermetallics 88 28-30 (2017)
Effect of annealing and process parameters on microstructure and properties of DC Magnetron Sputtered Ni-Zr alloy thin films Sahu B. P., Mitra R. By MRS Advances 1-8 (2017)
Effect of composition and isothermal holding temperature on the precipitation hardening in Vanadium-microalloyed steels Karmakar A., Mukherjee S. , Kundu S. , Srivastava D. , Mitra R. , Chakrabarti D. By Materials Characterization 132 31-40 (2017)
Effect of Cooling Rate and Chemical Composition on Microstructure and Properties of Naturally Cooled Vanadium-Microalloyed Steels Karmakar A., Sahu P. , Neogy S. , Chakrabarti D. , Mitra R. , Mukherjee S. , Kundu S. By Metallurgical and Materials Transactions A 48 1581-1595 (2017)
Effect of Cr on the evolution of microstructures in as-cast ternary niobium-silicide-based composites Maji P., Mitra R. , Ray K. K. By Intermetallics 85 34-47 (2017)
Effect of Microalloy Precipitates on the Microstructure and Texture of Hot-Deformed Modified 9Cr-1Mo Steel Chatterjee A., Dutta A. , Sk M. B., Mitra R. , Bhaduri A. K., Chakrabarti D. By Metallurgical and Materials Transactions A 48 2410-2424 (2017)
Spray-freeze-dried nanosized silicon carbide containing granules: Properties, compaction behaviour and sintering Prasenjit Barick, Bhaskar Prasad Saha, Shrikant V. Joshi, Rahul Mitra By Journal of the European Ceramic Society 36 3863-77 (2016)
Effect of mushy state rolling on the microstructure, microhardness and microtexture in Al-4.5 wt%. Cu-5 wt%TiB2 in-situ composite Mandal M., Mitra R. By JOM 68(7) 1902-08 (2016)
Effect of pressure and temperature on densification, microstructure and mechanical properties of spark plasma sintered silicon carbide processed with β-silicon carbide nanopowder and sintering additives Prasenjit Barick, Dibyendu Chakravarty, Bhaskar Prasad Saha, Rahul Mitra, Shrikant V. Joshi By Ceramic International 42 3836-3848 (2016)
Dynamic Fracture Behaviour of Thermo-Mechanically Processed Modified 9Cr-1Mo Steel Arya Chatterjee, A. Moitra, A. K. Bhaduri, R. Mitra and D. Chakrabarti By Engineering Fracture Mechanics 149 74-88 (2015)
Effect of concentration and molecular weight of polyethylenimine on zeta potential, isoelectric point of nanocrystalline silicon carbide in aqueous and ethanol medium Prasenjit Barick, Bhaskar Prasad Saha, Rahul Mitra, Shrikant V. Joshi By Ceramic International 41 4289-93 (2015)
Effect of Y2O3 addition on oxidation behavior of W-Cr alloys Suresh Telu, Rahul Mitra, and Shyamal Kumar Pabi By Metallurgical and Materials Transactions, A. 46A 5909-19 (2015)
Effect of post-solutionizing cooling rate on microstructure and low cycle fatigue behavior of a cast nickel based superalloy Kumud K. Mehta, R. Mitra, and Sanjay Chawla By Materials Science and Engineering A 611 280-89 (2014)
Effect of Si3N4 addition on compressive creep behavior of hot pressed ZrB2-SiC composites Manab Mallik, K.K. Ray, and R. Mitra By Journal of the American Ceramic Society 97(9) 2957-64 (2014)
Effect of substrate bias on microstructure and properties of Ni-TiN nanocomposite thin films deposited by reactive magnetron co-sputtering Mukesh Kumar and R. Mitra By Surface and Coatings Technology 251 239-246 (2014)
Effect of Ar:N2 ratio on structure and properties of Ni-TiN nanocomposite thin films processed by reactive RF/DC magnetron sputtering Mukesh Kumar, S. Mishra, and R. Mitra By Surface and Coatings Technology 228 100-114 (2013)
Effect of homogeneity of particle distribution on tensile crack propagation in mushy state rolled in-situ Al-4.5Cu-5TiB2 particulate composite A. Jana, I.G. Siddhalingeshwar, and R. Mitra By Materials Science and Engineering A 575 104-110 (2013)
Effect of Oxygen Partial Pressure on the Cyclic Oxidation Behavior of Mo76Si14B10 B. Roy, Khushboo, J. Das, R. Mitra, and S.K. Roy By Metallurgical and Materials Transactions, A. 44A 2910-13 (2013)
Effect of SiC content, additives and process parameters on densification and structure-property relations of pressureless sintered ZrB2-SiC composites Manab Mallik, Sabyasachi Roy, K.K. Ray and R. Mitra By Ceramic International 39(3) 2915-32 (2013)
Transient stage oxidation behavior of Mo76Si14B10 alloy at 1150 °C Barna Roy, J. Das and R. Mitra By Corrosion Science 68 231-237 (2013)
Processing of silica foam using steam heating and its characterization Jitendra Verma, R. Mitra and M. Vijayakumar By Journal of the European Ceramic Society 33 943-51 (2013)
Influence of superficial CeO2 coating on high temperature oxidation behavior of Ti-6Al-4V V. Sreedhar, J. Das, R. Mitra and S.K. Roy By Journal of alloys and compounds 519 106-111 (2012)
Effect of Age-Hardening on Dry Sliding wear behavior of mushy state rolled In-situ Al-4.5Cu-5TiB2 composites K. Pavitra and R. Mitra By Materials Science and Engineering A 557 84-91 (2012)
Effect of hot rolling temperature and thermal cycling on creep and damage behavior of powder metallurgy processed Al-SiC particulate composite Jishnu J. Bhattacharryya and R. Mitra By Materials Science and Engineering A 557 92-105 (2012)
Electrical and thermophysical properties of ZrB2 and HfB2 based composites Manab Mallik, Ansu J. Kailath, K.K. Ray and R. Mitra By Journal of the European Ceramic Society 32 2545-2555 (2012)
Microstructural evolution and mechanical properties of nano-intermetallics (in-situ) dispersed amorphous matrix Al65Cu20Ti15 composite synthesized by mechanical alloying and Hot Isostatic Pressing D. Roy, R. Mitra, O.A. Ojo, W. Lojkowski, I. Manna By Metallurgical and Materials Transactions, A. 42A 2498-2508 (2011)
Effect of Ce addition on the oxidation behaviour of Mo-Si-B-Al ultrafine composites at 1100 oC J. Das, R. Mitra and S.K. Roy By Scripta Materialia 64 486-89 (2011)
Effect of mushy state rolling on age-hardening and tensile behavior of Al-4.5Cu alloy and in-situ Al-4.5Cu-5TiB2 composite I. G. Siddhalingeswar, M.A. Herbert, M. Chakraborty, and R. Mitra By Materials Science and Engineering A 528 1787-98 (2011)
Oxidation behavior of hot-pressed ZrB2-SiC and HfB2-SiC composites Manab Mallik, K.K. Ray and R. Mitra By Journal of the European Ceramic Society 31(1-2) 199-215 (2011)
Oxidation behavior of Mo-Si-B-(Al,Ce) ultrafine-eutectic dendrite composites in the temperature range of 500-700 oC J. Das, R. Mitra and S.K. Roy By Intermetallics 19(1) 1-8 (2011)
Sliding wear behavior of in situ Al-4.5Cu-5TiB2 composite processed by single and multiple roll passes in mushy state I.G. Siddhalingeswar, D. Deepthi, M. Chakraborty, and R. Mitra By Wear 271 748-759 (2011)
Impact abrasive wear response of carbon/carbon composites at elevated temperatures S. Sarkar, E. Badisch, R. Mitra, Manish Roy By Tribology Letters 37(2) 445-451 (2010)
Room temperature mechanical properties and tensile creep behavior of powder metallurgy processed and hot rolled Al and Al-SiCp composites Sharmilee Pal, K.K. Ray and R. Mitra By Materials Science and Engineering A. 527 6831-6837 (2010)
Isopropanol as an air-liquid interface reformer in the processing of cellular silica Sarika Mishra and R. Mitra By Journal of Alloys and Compounds 506 308-312 (2010)
Strength and Fracture Behaviour of Two, Three and Four Dimensionally Reinforced Carbon/Carbon Composites Sourav Sarkar, Sweety Kumari, V.G. Sekaran and R. Mitra By Materials Science and Engineering, A. 527(7-8) 1835-43 (2010)
Structure-property correlation in cellular silica processed through hydrophobized fused silica powder for aerospace application Sarika Mishra, R. Mitra, and M. Vijayakumar By Journal of Alloys and Compounds 504 76-82 (2010)
Microstructure and creep behavior of DMS4-type nickel based superalloy single crystals with orientations near <001> and <011> D. Chatterjee, N. Hajari, N. Das, and R. Mitra By Materials Science and Engineering A 528 604-613 (2010)
Effect of grain size on strain rate sensitivity of cryomilled Al-Mg alloy Byungmin Ahn, Rahul Mitra, Enrique J. Lavernia and Steve R. Nutt By Journal of Materials Science 45 4790-4795 (2010)
Tensile properties of as cast and mushy state rolled Al-4.5Cu alloy and in-situ Al4.5Cu-5TiB2 composite Mervin A. Herbert, G. Das, R. Maiti, M. Chakraborty and R. Mitra By International Journal of Cast Metals Research 23(4) 216-224 (2010)
Structure and properties of short fiber reinforced silica matrix composite foams processed through slurry based route Sarika Mishra, R. Mitra and M. Vijayakumar By Ceramic International 35(8) 119-124 (2009)
Studies on laser sintering of mechanically alloyed Al50Ti40Si10 composite Singh S. S., Roy D. , Mitra R. , Rao R. S., Dayal R. K., Raj B. , Manna I. By Materials Science and Engineering: A 501 242-247 (2009)
Studies on wear behavior of nano-intermetallic reinforced Al-base amorphous/nanocrystalline matrix in situ composite Roy D., Singh S. S., Basu B. , Lojkowski W. , Mitra R. , Manna I. By Wear 266 1113-1118 (2009)
Synthesis and characterization of precipitation hardened amorphous matrix composite by mechanical alloying and pulse plasma sintering of Al65Cu20Ti15 Roy D., Singh S. S., Mitra R. , Rosinski M. , Michalski A. , Lojkowski W. , Manna I. By Philosophical Magazine 89 1051-1061 (2009)
Synthesis and Characterization of Precipitation Hardened Amorphous Matrix Composite by Mechanical Alloying and Pulse Plasma Sintering of Al65Cu20Ti15 D. Roy, S.S. Singh, R. Mitra, W. Lojkowski and I. Manna By Philosophical Magazine A 89(12) 1051-61 (2009)
The effect of thermal cycling on creep behavior of powder metallurgy processed and hot rolled Al and Al-SiC particulate composites S. Pal, V.V. Bhanuprasad, R. Mitra and K.K. Ray By Metallurgical and Materials Transactions A. 40A 3171-85 (2009)
The mechanical properties of nano-TiO2 dispersed Al65Cu20Ti15 amorphous / nanocrystalline matrix bulk composite prepared by mechanical alloying and high pressure sintering Roy D., Mitra R. , Chudoba . , Witczak Z. , Ojkowski W. , Fecht H. J., Manna I. By Solid State Phenomena 140 161-166 (2009)
Non-isothermal and Cyclic Oxidation Behaviour of Mo-Si-B and Mo-Si-B-Al Alloys Sharma Paswan, R. Mitra and S.K. Roy By Metallurgical and Materials Transactions A. 40A 2644-2658 (2009)
Processing and microstructure of particle stabilized silica foams Sarika Mishra, R. Mitra and M. Vijayakumar By Materials Letters 63 2649-2651 (2009)
Non-isothermal and Isothermal Oxidation Behaviour of the Nb-Si-Mo Alloys Chattopadhyay K., Mitra R. , Ray K. K. By Metallurgical and Materials Transactions A. 39A 577-92 (2008)
Damage Evaluation in Discontinuously Reinforced Aluminum Matrix Composites Subjected to Thermal Cycling Sharmilee Pal, V.V. Bhanuprasad, and R. Mitra By Materials Science and Engineering A 489 11-20 (2008)
Effect of Sintering on Microstructure and Mechanical Properties of Nano-TiO2 Dispersed Al65Cu20Ti15 Amorphous/Nanocrystalline Matrix Composite D. Roy, D. Chakravarty, R. Mitra, and I. Manna By Journal of alloys and compounds 460 (1-2) 320-325 (2008)
Effect of Sintering on Microstructure and Mechanical Properties of Nano-TiO2 Dispersed Al65Cu20Ti15 Amorphous/Nanocrystalline Matrix Composite Roy D., Chakravarty D. , Mitra R. , Manna I. By Journal of Alloys and Compounds 460 320-325 (2008)
Structure and mechanical properties of Al65Cu20Ti15-based amorphous/nanocrystalline composite prepared by high pressure sintering Roy D., Mitra R. , Chudoba T. , Witczak Z. , Lojkowski W. , Fecht H. , Manna I. By Materials Science and Engineering: A 497 93-100 (2008)
Synthesis and characterization of in situ nanocrystalline intermetallic phase reinforced AlTiSi amorphous matrix composite Roy D., Mitra R. , Fedyk R. , Witczak Z. , Lojkowski W. , Manna I. By Philosophical Magazine 88 3031-3041 (2008)
Synthesis and characterization of in-situ nanocrystalline intermetallic phase reinforced AlTiSi amorphous matrix composite D. Roy, R. Mitra, R. Fedyk, Z. Witczak, W. Lojkowski, I. Manna By Philosophical Magazine A 88 3031-41 (2008)
Aging behaviour of Al-Cu-Mg Alloy-SiC Composites Sharmilee Pal, R. Mitra, and V.V. Bhanuprasad By Materials Science and Engineering A 480(1-2) 496-505 (2008)
A novel route for the dispersion of fibers for the preparation of fiber reinforced porous composites Sarika Mishra, R. Mitra, and M. Vijayakumar By Materials Letters 62(12-13) 2025-2028 (2008)
Light weight silica tiles through foam casting method Sarika Mishra, R. Mitra, and M. Vijayakumar By Journal of the European Ceramic Society 28(9) 1769-76 (2008)
Wear Behaviour of Cast and Mushy State Rolled Al-4.5Cu Alloy and In-situ Al-4.5Cu-5TiB2 Composite Mervin Herbert, R. Maiti, R. Mitra, and M. Chakraborty By Wear 265 1606-18 (2008)
Oxidation Behaviour of the Mo-Si-B and Mo-Si-B-Al Alloys in the Temperature Range of 700-1300oC Sharma Paswan, R. Mitra and S.K. Roy By Intermetallics 15 1217-1227 (2007)
Microstructural Evolution, Hardness and Alligatoring in the Mushy State Rolled Cast Al-4.5Cu Alloy and In-situ Al4.5Cu-5TiB2 Composite Mervin A. Herbert, Chandan Sarkar, R. Mitra and M. Chakraborty By Metallurgical and Materials Transactions A. 38(9) 2110-2126 (2007)
Microstructure and mechanical properties of mechanically alloyed and spark plasma sintered amorphous-nanocrystalline Al65Cu20Ti15 intermetallic matrix composite reinforced with TiO2 nanoparticles D. Roy, S. Kumari, R. Mitra, and I. Manna By Intermetallics 15(12) 1595-1605 (2007)
Microstructure and Mechanical Properties of Mechanically Alloyed and Spark Plasma Sintered Amorphous /Nanocrystalline Al65Cu20Ti15 Matrix Composite with Nano-TiO2 Dispersion Roy D., Kumari S. , Mitra R. , Manna I. By Intermetallics 15 1595-1605 (2007)
Effect of Mo on Microstructure and Mechanical Behaviour of Cast Nbss-Nb5Si3 In-Situ Composites K. Chattopadhyay, G. Balachandran, R. Mitra, and K.K. Ray By Intermetallics 14(12) 1452-1460 (2006)
Mechanical Behavior and Oxidation Resistance of Structural Silicides R. Mitra By International Materials Review 51(1) 13-64 (2006)
Microstructure and Mechanical Behaviour of Reaction Hot Pressed Multiphase Mo-Si-B and Mo-Si-B-Al Intermetallic Alloys R. Mitra, A.K. Srivastava, N. Eswara Prasad, and Sweety Kumari By Intermetallics 14(12) 1461-1471 (2006)
Oxidation Behaviour of Mo-Si-B and Mo-Si-B-Al Alloys in the Temperature Range of 400-800oC Sharma Paswan, R. Mitra, and S.K. Roy By Materials Science and Engineering A 424 251-265 (2006)
Stability and response to rolling of the interfaces in cast Al-SiCp composites Mitra R., Chalapathy Rao V. S., Chakraborty M. By Materials Science and Engineering A A379 391-400 (2004)
Effect of microstructural parameters and Al alloying on creep behaviour, threshold stress and activation volumes of molybdenum disilicides R. Mitra, K. Sadananda and C. R. Feng By Intermetallics 12 827-836 (2004)
In-Situ Study of Deformation Mechanisms in Sputtered Free-Standing Nanocrystalline Nickel Films R. Mitra, W. A. Chiou and J. R. Weertman By Journal of Materials Research 19(4) 1029-1037 (2004)
Micromechanics model concerning yield behaviour of nanocrystalline metals T. Morita, R. Mitra and J. R. Weertman By Materials Transactions Japan Institute of Metals 45(2) 502-508 (2004)
Microstructure, Mechanical Properties and Oxidation Behaviour of a Multiphase Mo-Cr-Si-Al Alloy-SiC Composite Processed by Reaction Hot Pressing R. Mitra and Rohit Khanna By Materials Science and Engineering A A382 150-161 (2004)
High temperature deformation behaviour of coarse and fine-grained MoSi2 with varying silica content R. Mitra, N. Eswara Prasad, S. Kumari and A. Venugopal Rao By Metallurgical and Materials Transactions A. 34A 1069-88 (2003)
In-situ TEM Tensile Testing of DC Magnetron Sputtered and Pulsed Laser Deposited Ni Thin Films R.C. Hugo, H. Kung, J.R. Weertman, R. Mitra, J.A. Knapp, and D.M. Follstaedt By Acta Materialia 51 1937-1943 (2003)
Structural Variations in Nanocrystalline Nickel Films P. L. Gai, R. Mitra and J. R. Weertman By Pure and Applied Chemistry 74(9) 1519-1526 (2002)
Effect of annealing on microstructure, residual stress and hardness of Al-Ti multilayered films R. Mitra, A. Madan, R. A. Hoffman, W. -A. Chiou and J. R. Weertman By Journal of Materials Research 16(7) 2064-2076 (2001)
Effect of process variables on the structure, residual Stress and hardness of Sputtered Nanocrystalline Nickel Films R. Mitra, R. A. Hoffman, A. Madan and J. R. Weertman By Journal of Materials Research 16(4) 1010-1027 (2001)
Effect of MoSi2 and Nb reinforcements on mechanical properties of Al2O3 matrix composites A. Chakraborty, S. V. Kamat, R. Mitra and K. K. Ray By Journal of Materials Science 35 3827-3835 (2000)
Structure and mechanical behavior of bulk nanocrystalline materials J. R. Weertman, D. Farkas, K. Hemker, H. Kung, M. Mayo, R. Mitra and H. Van Swygenhoven By MRS Bulletin 24(2) 44-50 (1999)
Creep and fatigue properties of high temperature silicides and their composites K. Sadananda, C. R. Feng, R. Mitra and S. C. Deevi By Materials Science and Engineering A 261 223-238 (1999)
Effect of minor alloying with Al on oxidation behaviour of MoSi2 at 1200 C R. Mitra and V. V. Rama Rao By Materials Science and Engineering A 260 146-160 (1999)
Effect of small Al alloying on microstructure and mechanical properties of molybdenum disilicide R. Mitra, V. V. Rama Rao and A. Venugopal Rao By Intermetallics 7(2) 213-232 (1999)
Elevated temperature oxidation behaviour of titanium silicide based materials R. Mitra and V. V. Rama Rao By Metallurgical and Materials Transactions A 29A (6) 1665-1675 (1998)
Microstructure and mechanical behaviour of reaction hot pressed titanium silicide based alloy and composite R. Mitra By Metallurgical and Materials Transactions A 29A 1629-1641 (1998)
Oxidation behaviour of reaction hot pressed MoSi2/SiC composites at 500 C R. Mitra, V. V. Rama Rao and Y. R. Mahajan By Materials Science and Technology 13(5) 415-419 (1997)
Processing-microstructure-property relationship in reaction hot pressed MoSi2 and MoSi2/SiC composites R. Mitra, Y. R. Mahajan, N. E. Prasad and W.-A. Chiou By Materials Science and Engineering A 225 105-117 (1997)
A study of the crack path in flake graphite cast iron using profilometric analysis K. K. Ray, R. Mitra and A. Bhaduri By Cast Metals 8(2) 65-71 (1995)
A Study of the Crack Path in Flake Graphite Cast Iron using Profilometric Analysis Ray K. K., Mitra R. , Bhaduri A. By Cast Metals Volume 8, Number 2 65-71 (1995)
Interfaces in discontinuously reinforced metal matrix composites: An overview R. Mitra and Y. R. Mahajan By Bulletin of Materials Science 18(4) 405-434 (1995)
Effect of particle size on the thermal expansion of TiC/Al XDTM composites Z. R. Xu, K. K. Chawla, R. Mitra and M. E. Fine By Scripta Metallurgica et Materialia 31 (11) 1525-1530 (1994)
Chemical Reaction Strengthening of Al/TiC metal matrix composites by isothermal heat treatment at 913 K R. Mitra, M. E. Fine and J. R. Weertman By Journal of Materials Research 8 (9) 2370-2379 (1993)
Interfaces in Al/TiC composites prepared by in-situ process M. E. Fine, R. Mitra and J. R. Weertman By Zeischrift Metallkunde 84(4) 282-285 (1993)
Interfaces in as-extruded XD Al/TiC and Al/TiB2 metal matrix composites R. Mitra, W.-A. Chiou, M. E. Fine and J. R. Weertman By Journal of Materials Research 8 (9) 2380-2392 (1993)
Internal stress and work of adhesion M. E. Fine, R. Mitra and K. K. Chawla By Scripta Metallurgica et Materialia 29 221-223 (1993)
Relaxation mechanisms at interfaces in XDTM Al/TiC metal matrix composites R. Mitra, W.-A. Chiou, J. R. Weertman, M. E. Fine and R. M. Aikin, Jr. By Scripta Metallurgica et Materialia 25 2689-2694 (1991)

Workshop

Polymer-containing Metal-Organic Framework (PcMOF) For Efficient Removal of Lead from Water: Applications In Water Purification Maity P., Mitra R. , Singha N. K. By Rubber Technology Centre, IIT Kharagpur - (2023)

Book Chapter/Section

Advanced techniques for characterization of structure, composition and mechanical behaviour Mitra R. By Future Landscape of Structural Materials in India 309-353 (2022)
Chapter 9 - Metal Organic Framework based nanomaterials as suitable electrocatalysts for evolution of Hydrogen Maitra S., Mitra R. , Nath T. K. By Metal Organic Framework-based Nanomaterials for Energy Conversion and Storage: Micro and Nano Technologies, ISBN: 9780323911795 185-203 (2022)
Oxidation behavior of silicides Mitra R. By Diffusion Controlled Growth and Oxidation of Metal-Silicides 127-156 (2019)
Silicides and Silicide Matrix Composites for High Temperature Structural Applications Mitra R. By Handbook of advanced ceramics and composites 1-55 (2019)
High Temperature Environmental Degradation Behavior of Ultra-High Temperature Ceramic Composites: Case examples of Zirconium and Hafnium Diboride Mitra R., Mallik M. , Kashyap S. K. By Handbook of advanced ceramics and composites 1-35 (2019)
Oxidation and environmental degradation of intermetallic matrix composites Mitra R. By Intermetallic Matrix Composites - Properties and Applications 321-358 (2018)
Structural Intermetallics and Intermetallic Matrix Composites: An Introduction Mitra R. By Intermetallic Matrix Composites - Properties and Applications 1-18 (2018)
Molybdenum Silicide-based Composites Mitra R. By Intermetallic Matrix Composites - Properties and Applications 95-146 (2018)
Development of composite materials for high temperature and light weight structural applications Mitra R. By Annals of INAE 107-121 (2017)
Structural Intermetallics Mitra R., Wanhill R. J. By Aerospace Materials and Materials Technologies, Part of the Indian Institute of Metals Series, Volume 1: Aerospace Materials 229-245 (2016)

Symposium

Polymer containing Metal-Organic Framework (PcMOF) for Removal of Lead Ion (Pb ²) in Water Purification Maity P., Mitra R. , Singha N. K. By CompFlu 2022 - (2022)

Conferences

Grain boundary serrations: An effective approach to mitigate high-temperature hot corrosion in Inconel 617 Bhuyan P., Pradhan S. K., Mitra R. , Mandal S. By European congress and exhibition on advanced materials and processes (EUROMAT 2019) - (2019)
Structural evolution, mechanical and corrosion behavior of NixZr1-x alloy thin films processed by dc magnetron co-sputtering Mitra R. By Third International Conference on Nanomaterials: Synthesis, Characterization and Applications (ICN 2018) - (2018)
Structural evolution of dc magnetron sputtered NixZr1-x alloy thin films Mitra R. By International Conference on Microscopy - (2018)
Structural Integrity of ZrB2-SiC based ultrahigh temperature ceramic composites at high temperatures and extreme environments Mitra R. By Structural Integrity Conference & Exhibition - (2018)
Structure and Chemistry of Interfaces in Sintered SiC and ZrB2-SiC Based Composites Mitra R. By International Conference and XXXVIII Annual Meeting, Electron Microscope Society of India - (2017)
Molybdenum and niobium silicide based multiphase alloys: structure-property relations and high temperature oxidation behavior Mitra R. By International Conference in Materials Engineering - (2017)
Effect of Zr Addition on oxidation behavior of Mo-Si-B alloys in dry and moist environments Mitra R., Kumar N. K., Das J. By Materials Science & Technology - (2016)
Effect of Fe addition on the oxidation behaviour of multiphase Mo76Si14B10 alloy at 1300 °C in dry and moist air Kumar N., Roy B. , Das J. , Mitra R. By CORCON 2016 - (2016)

Book

Intermetallic Matrix Composites - Properties and Applications Mitra R. By Intermetallic Matrix Composites 1-471 (2018)
Structural Intermetallics and Intermetallic Matrix Composites Rahul Mitra By Structural Intermetallics and Intermetallic Matrix Composites - (2015)

Metallurgical and Materials Engineering

Faculty

Research Areas

Principal Investigator

Co-Principal Investigator

Ph. D. Students

Adarsha Ranjan Mishra

Ankita Bhattacharya

Arunangshu Pramanik

Ghewade Hrishikesh Dinkar

Jyoti Prakash Beura

Koushik Sikdar

Kousik Bera

Marupalli Bharatcharangoud

Parimi Vamsi Krishna

Payel Maity

Raashid Firoz

Ramya Krishna

Rejeesh R

Sadananda Behera

Sarthak Roy

Soma Hansda

Sudipta Roy

Swarnalata Behera

Thinesh Kumar S

Virushni S N