Metallurgical and Materials Engineering

No Record Found.

Journal
• Implication of nano-scale grain refinement on the passive film formation and corrosion response of AISI 301L steel with and without pre-existing martensite Surya Prakash N., Mandal S., Mandal S., Chakrabarti D., Roy M. By Materials Letters 336 - (2023)
• Implication of Nano-Scale Grain Refinement on the Passive Film Formation and Corrosion Response of AISI 301L Steel with and without Pre-Existing Martensite Surya Prakash N., Mandal S. , Mandal S. , Chakrabarti D. , Roy M. By Materials Letters 336 133836- (2023)
• Synergistic Effects of Cerium and Hot Forging on Biodegradation, Antibacterial Properties, and In Vivo Biocompatibility of Microalloyed Mg Zr Sr Alloys Roy M., Sahoo S. N., Mandal S. , Khan R. , Dutta S. , Pal S. , Ghosh D. , Nandi S. K. By ACS Biomaterials Science & Engineering 9 - (2023)
• Synergistic improvement of antibacterial, mechanical and degradation properties of Cu added Mg-Zn-Zr alloy Mandal S., Nigamananda Sahoo S., Balla V.K., Das M., Roy M. By Materials Letters 339 - (2023)
• In vitro and in vivo assessment of decellularized platelet-rich fibrin-loaded strontium doped porous magnesium phosphate scaffolds in bone regeneration Tarif C.M., Mandal S., Chakraborty B., Sarkar K., Mukherjee P., Roy M., Nandi S.K. By Journal of the Mechanical Behavior of Biomedical Materials 138 - (2023)
• In vivo biocompatibility of SrO and MgO doped brushite cements Nandi S. K., Roy M. , Bandyopadhyay A. , Bose S. By Journal of Biomedical Materials Research Part B: Applied Biomaterials 111 - (2023)
• Cobalt free refractory high entropy alloys for total joint arthroplasty: In-vitro wear, corrosion and cytocompatibility evaluation Chavan A., Mandal S., Roy M. By Journal of Alloys and Compounds 938 - (2023)
• In Vitro Degradation and In Vivo Biocompatibility of Strontium-Doped Magnesium Phosphate-Reinforced Magnesium Composites Dutta S., Khan R., Prakash N.S., Gupta S., Ghosh D., Nandi S.K., Roy M. By ACS Biomaterials Science and Engineering 8 4236-4248 (2022)
• In vivo osteogenesis of plasma sprayed ternary-ion doped hydroxyapatite coatings on Ti6Al4V for orthopaedic applications Ratha I., Datta P., Chand Reger N., Das H., Balla V.K., Devi K.B., Roy M., Nandi S.K., Kundu B. By Ceramics International 48 11475-11488 (2022)
• Magnesium Phosphate Bioceramics for Bone Tissue Engineering Bavya Devi K., Lalzawmliana V., Saidivya M., Kumar V., Roy M., Kumar Nandi S. By Chemical Record 22 - (2022)
• In vitro and in vivo degradability, biocompatibility and antimicrobial characteristics of Cu added iron-manganese alloy Mandal S., Kishore V., Bose M., Nandi S.K., Roy M. By Journal of Materials Science and Technology 84 159-172 (2021)
• Effect of cerium-based conversion coating on corrosion behavior of squeeze cast Mg-4 wt% Y alloy in 0.1 M NaCl solution Kamde M.A., Mahton Y., Ohodnicki J., Roy M., Saha P. By Surface and Coatings Technology 421 - (2021)
• Decellularized xenogenic cartilage extracellular matrix (ECM) scaffolds for the reconstruction of osteochondral defects in rabbits Das P., Mishra R. , Devi B. K., Rajesh K. , Basak P. , Roy M. , Roy P. , Lahiri D. , Nandi S. K. By Journal of Materials Chemistry B - (2021)
• Effects of multiscale porosity and pore interconnectivity on in vitro and in vivo degradation and biocompatibility of Fe Mn Cu scaffolds Mandal S., Nandi S. K., Roy M. By Journal of Materials Chemistry B 9 4340-4354 (2021)
• Microstructure, mechanical, in vitro corrosion and biocompatibility response study of as-cast and as-rolled Mg 5Zn 0.5Zr alloy Jana A., Dutta S., Roy M., Aravind U., Das M., Balla V.K. By MRS Advances - (2021)
• Recent Developments in Magnesium Metal Matrix Composites for Biomedical Applications: A Review Dutta S., Gupta S. , Roy M. By ACS Biomaterials Science & Engineering - (2020)
• In vivo performance analysis of silanized and coated nitinol wires in biological environment Sinha S., Priyadarshani J. , Devi K. B., Kishore A. V., Das P. , Chanda A. , Das S. , Roy M. , Nandi S. K. By Journal of Materials Research 35 1262-1270 (2020)
• Effects of cerium addition on the corrosion resistance and biocompatibility of Mg-2Sr-1Zr Alloy Dutta S., Mandal S., Gupta S., Roy M. By Journal of Materials Research 35 3124-3135 (2020)
• Degradability and in Vivo Biocompatibility of Doped Magnesium Phosphate Bioceramic Scaffolds Sarkar K., Rahaman M. , Agarwal S. , Bodhak S. , Haldar S. , Nandi S. K., Roy M. By Materials Letters 259 126892- (2020)
• Effects of Cerium Addition on the Corrosion Resistance and Biocompatibility of Mg-2Sr-1Zr Alloy Dutta S., Mandal S. , Gupta S. , Roy M. By Journal of Materials Research 35 (22) 3124-3135 (2020)
• Mesoporous bioactive glasses for bone healing and biomolecules delivery Lalzawmliana V., Anand A. , Roy M. , Kundu B. , Nandi S. K. By Materials Science and Engineering: C 106 110180- (2020)
• Anomalous in Vitro and in Vivo Degradation of Magnesium Phosphate Bioceramics: Role of Zinc Addition Sarkar K., Kumar V. , Devi B. K., Ghosh D. , Nandi S. K., Roy M. By ACS Biomaterials Science and Engineering - (2019)
• Potential of growth factor incorporated mesoporous bioactive glass for in vivo bone regeneration Lalzawmliana V., Anand A. , Kumar V. , Das P. , Devi B. K., Mukherjee J. , Maji A. K., Kundu B. , Roy M. , Nandi S. K. By Journal of the mechanical behavior of biomedical materials 91 182-192 (2019)
• Effects of Sr doping on biodegradation and bone regeneration of magnesium phosphate bioceramics Sarkar K., Kumar V. , Devi B. K., Ghosh D. , Nandi S. K., Roy M. By Materialia 5 100211- (2019)
• Magnesium Silicate Bioceramics for Bone Regeneration: A Review Devi B. K., Nandi S. K., Roy M. By Journal of the Indian Institute of Science 1-28 (2019)
• Synergistic effects of silicon/zinc doped brushite and silk scaffolding in augmenting the osteogenic and angiogenic potential of composite biomimetic bone grafts Moses J. C., Dey M. , Devi B. K., Roy M. , Nandi S. K., Mandal B. B. By ACS Biomaterials Science & Engineering 5 1462-1475 (2019)
• Preparation and in vivo biocompatibility studies of different mesoporous bioactive glasses Anand A., Lalzawmliana V. , Kumar V. , Das P. , Devi B. K., Maji A. K., Kundu B. , Roy M. , Nandi S. K. By Journal of the mechanical behavior of biomedical materials 89 89-98 (2019)
• Fe-Mn-Cu Alloy as Degradable Bio-Metal with Enhanced Antimicrobial Properties Mandal S., Ummadi R. , Bose M. , Balla V. K., Roy M. By Materials Letters 237 323-327 (2019)
• Development and characterization of acellular caprine choncal cartilage matrix for tissue engineering applications Das P., Rajesh K. , V L. , Devi B. K., Basak P. , Lahiri D. , Kundu B. , Roy M. , Nandi S. K. By Cartilage - (2019)
• Mechanical and in vitro degradation behavior of magnesium-bioactive glass composites prepared by SPS for biomedical applications Dutta S., Karuppasamy B. , Gupta S. , Kundu B. , Valla V. , Roy M. By Journal of Biomedical Materials Research Part B: Applied Biomaterials 107(2) 352-365 (2019)
• Metallic ion doped tri-calcium phosphate ceramics: Effect of dynamic loading on in vivo bone regeneration Samanta S. K., Devi B. K., Das P. , Mukherjee P. , Chanda A. , Roy M. , Nandi S. K. By Journal of the mechanical behavior of biomedical materials 96 227-235 (2019)
• Quantitative Assessment of Degradation, Cytocompatibility, and in Vivo Bone Regeneration of Silicon-Incorporated Magnesium Phosphate Bioceramics Kumar V., Sarkar K. , Devi K. B., Ghosh D. , Nandi S. K., Roy M. By Journal of Materials Research 34 4024-4036 (2019)
• In Vitro Corrosion and Cytocompatibility Studies of Hot Press Sintered Magnesium-Bioactive Glass Composite Dutta S., Devi B. K., Mandal S. , Mahato A. , Gupta S. , Kundu B. , Balla V. , Roy M. By Materialia 5 100245-100254 (2019)
• In Vitro Biodegradation and In Vivo Biocompatibility of Forsterite Bio-Ceramics: Effects of Strontium Substitution Devi . K., Tripathy B. , Roy A. , Lee B. , Kumta P. N., Nandi S. K., Roy M. By ACS Biomaterials Science and Engineering 5 530-543 (2018)
• In Vivo Biocompatibility of Zinc-Doped Magnesium Silicate Bio-Ceramics Devi B. K., Tripathy B. , Kumta P. N., Nandi S. K., Roy M. By ACS Biomaterials Science & Engineering 4 2126-2133 (2018)
• Effect of zinc oxide doping on in vitro degradation of magnesium silicate bioceramics Devi B. K., Lee B. , Roy A. , Kumta P. N., Roy M. By Materials Letters 207 100-103 (2017)
• Processing and degradation behavior of porous magnesium scaffold for biomedical applications Dutta S., Devi B. K., Roy M. By Advanced Powder Technology 28 3204-3212 (2017)
• Phase stability and biological property evaluation of plasma sprayed hydroxyapatite coatings for orthopedic and dental applications Vahabzadeh S, Roy M, Bandyopadhyay A, Bose S By Acta Biomaterialia 17 47-55 (2015)
• Effects of grain refinement on the biocorrosion and in vitro bioactivity of magnesium P Saha, M Roy, MK Datta, B Lee, PN Kumta By Materials Science and Engineering: C 57 294-303 (2015)
• Effects of silicon on osteoclast cell mediated degradation, in vivo osteogenesis and vasculogenesis of brushite cement Vahabzadeh S, Roy M, Bose S By Journal of Materials Chemistry B 3 (46) 8973-8982 (2015)
• Effects of Zinc and Strontium Substitution in Tricalcium Phosphate on Osteoclast Differentiation and Resorption Roy M, Fielding G, Bandyopadhyay A and Bose S By Biomaterials Science 1 74-82 (2013)
• Recent Advances in Bone Tissue Engineering Bose S, Roy M, Bandyopadhyay A By Trends in Biotechnology 30 546-554 (2012)
• Resorbable Tricalcium Phosphates for Bone Tissue Engineering: Influence of SrO Doping DeVoe K, Banerjee S, Roy M, Bandyopadhyay A, Bose S By Journal of the American Ceramic Society 95 3095-3012 (2012)
• Antibacterial and biological characteristics of plasma sprayed silver and strontium doped hydroxyapatite coatings Fielding G, Roy M, Bandyopadhyay A, Bose S By Acta Biomaterialia 8 144-152 (2012)
• Mechanical and in Vitro Anti-Bacterial and Biological Properties of Plasma Sprayed Silver Doped Hydroxyapatite Coatings Roy M, Fielding G, Beyenal H, Bandyopadhyay A, Bose S By ACS Applied Materials and Interfaces 4 1341-1349 (2012)
• Mechanical and In Vitro Biocompatibility of Brushite Cement Modified by Polyethylene Glycol Roy M, DeVoe K, Bandyopadhyay A, Bose S By Materials Science and Engineering: C 32 2145-2152 (2012)
• MgO Doped Tantalum Coating on Ti: Microstructural Study and Biocompatibility Evaluation Roy M, Krishna BV, Bandyopadhyay A, Bose S By ACS Applied Materials and Interfaces 4 577-580 (2012)
• Osteoclastogenesis and Osteoclastic Resorption of Tricalcium Phosphate: Effect of Strontium and Magnesium Doping Roy M, and Bose S By Journal of Biomedical Materials Research A 100A 2450-2461 (2012)
• Laser Surface Modification of Metallic Biomaterials Bandyopadhyay A, Krishna BV, Roy M, Bose S By Journal of the Minerals, Metals & Materials Society (JOM) 63[6] 94-99 (2011)
• pH Tunable Fluorescent Calcium Phosphate Nanocomposite for Sensing and Controlled Drug Delivery Banerjee SS, Roy M, Bose S By Advanced Biomaterials (Advanced Engineering Materials) 13[1-2] B10-B17 (2011)
• Induction Plasma Sprayed Nano Hydroxyapatite Coatings on Titanium for Orthopaedic and Dental Implants Roy M, Bandyopadhyay A, Bose S By Surface and Coatings technology 205 2785-2792 (2011)
• Induction Plasma Sprayed Sr and Mg Doped Nano Hydroxyapatite Coatings Roy M, Bandyopadhyay A, Bose S By Journal of Biomedical Materials Research Part B: Applied Biomaterials 99B 258-265 (2011)
• Compositionally graded hydroxyapatite/tricalcium phosphate coating on Ti by laser and induction plasma Roy M, Krishna BV, Bandyopadhyay A, Bose S By Acta Biomaterialia 7 866-873 (2011)
• Bulk Processing of Hydroxyapatite Nanopowder Using Radio Frequency Induction Plasma Roy M, Bandyopadhyay A, Bose S By Journal of the American Ceramic Society 93[11] 3720-3725 (2010)
• Comparison of Tantalum and Hydroxyapatite Coatings on Titanium for Applications in Load Bearing Implants Roy M, Krishna BV, Bandyopadhyay A, Bose S By Advanced Biomaterials (Advanced Engineering Materials) 12[11] B637-B641 (2010)
• In vitro antimicrobial and biological properties of laser assisted tricalcium phosphate coating on titanium for load bearing implant Roy M, Bandyopadhyay A, Bose S By Materials Science and Engineering: C 29[6] 1965-1968 (2009)
• Surface Modification of Titanium for Load-Bearing Applications Bose S, Roy M, Das K, Bandyopadhyay A By Journal of Materials Science: Materials in Medicine 20[S1] S19-S24 (2009)
• Laser Processing of Bioactive Tricalcium Phosphate Coating on Titanium for Load-Bearing Implants Roy M, Krishna BV, Bandyopadhyay A, Bose S By Acta Biomaterialia 4[2] 324-333 (2008)
• Laser Surface Modification of Electrophoretically Deposited Hydroxyapatite Coating on Titanium Roy M, Bandyopadhyay A, Bose S By Journal of the American Ceramic Society 91[11] 3517-3521 (2008)
Others
• Correction to: Microstructure, mechanical, in vitro corrosion and biocompatibility response study of as-cast and as-rolled Mg 5Zn 0.5Zr alloy (MRS Advances, (2021), 6, 18, (472-476), 10.1557/s43580-021-00056-7) Jana A., Dutta S., Roy M., Aravind U., Das M., Balla V.K. By MRS Advances - (2022)
Book Chapter/Section
• Ceramics in Bone Grafts and Coated Implants Roy M., Bandyopadhyay A. , Bose S. By Materials and Devices for Bone Disorders 265-314 (2016)
• Characterization of Biomaterials Roy M, Bandyopadhyay A and Bose S By Mechanical Properties of Coatings on Medical Implants - (2013)
• Influences of Sr, Zn and Mg Dopants on Osteoclast Differentiation and Resorption Roy M, Fielding G, Bandyopadhyay A, Bose S By Ceramic transactions, Biomaterials Science: Processing, Properties, and Applications 227-237 (2012)
• Nanoscale Hydroxyapatite Coatings on Ti: Simultaneous Enhancement of Mechanical and Biological Properties Roy M, Bandyopadhyay A, Bose S By Ceramic transactions, Biomaterials Science: Processing, Properties, and Applications 147-158 (2011)

Principal Investigator

• Magnesium as degradable biomaterial: processing and bio - degradation mechanism evaluation
• Development of Magnesium Bioceramic for osteoporotic Bone Tissue Engineering
• Development and Commercialization of Degradable Metallic Internal Fracture Fixation Devices
• Development of CNT-reinforced Alumina Composite for Wear Resistant Applications